SAFEDECX4 – STATIONARY TRANSCEIVER UNIT

SAFEDECX4 – STATIONARY TRANSCEIVER UNIT INTERFACE 433MHz

SAFEDECX4 – STATIONARY TRANSCEIVER UNIT INTERFACE FOR SENSITIVE EDGE PHOTOCELLS OR GENERAL DEVICES 433MHz
Power supply 12/24Vac-dc.
Maximum radio signal range 30m.
8 safety devices.
3 safety outputs NC/8.2kΩ.
Shockproof case IP65.
ROLLING CODE FM RADIO system. transmission frequency: 433MHz

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

WIRELESS TRANSCEIVER SAFETY SYSTEM CONFORMS TO THE SAFETY STANDARD EN12978

RADIOSHIELD
MAXIMUM RADIO SIGNAL RANGE 30m
PROTECTION GRADE IP65
OPERATING TEMPERATURE RANGE -20…+55°C

Safety first, this is our what we have in mind. Guaranteeing safety within a complex system is not to be taken lightly
as it is never obtained by chance. Safety must be the point of arrival and to obtain it requires a combination of
professionalism, experience and know how. It is for this reason that our know how is dedicated to the creation of
professional appliances for specialised installers.
Radioshield is part of this project and it becomes part of a range of appliances all of which are dedicated to the
protection of absolutely reliable motorized closing systems constructed in conformity with . Appliances
that unite maximum detection efficiency and controlled intervention working together under all conditions
predictable or unpredictable that could arise during the operation of the system.

RANGE OF PRODUCTS

Radioshield is made up of the following high technology appliances protected by robust and practical containers
with an elevated degree of protection against inclement weather.

STATIONARY TRANSCEIVER UNIT

The stationary transceiverIN safedecx4 is able to manage up to 8 security devices via radio and is fitted with 3 safety outputs
NO/8.2kΩ set by jumpers. The semi-transparent cover allows the status of the safety devices and the level of
charge in the batteries on the transceiver interface to be controlled visually by means of LEDs. Each radio controlled
safety device can be associated with one of the three safety outputs by means of a dip-switch.

SAFETY EDGE TRANSCEIVER INTERFACE

The transceiver interface SAFEPRC4 is wired directly to the safety edge or sensitive edge
or devices in general on the moving part of the installation.
This is a highly professional appliance categorised as a safety device and used
with Cardin safety edges it conforms to the European safety standard EN12978.
The 3V Cardin Lithium battery supplied with the appliance is highly reliable under all weather
conditions and furnishes a high level of safety and top performance in all environments.

PAIR OF WIRELESS TRANSCEIVER PHOTOELECTRIC CELLS

The pair of wireless photoelectric cells SAFECRD4 can be installed on any surface without wiring. Power is supplied by a solar
panel on bright days and by a 3V lithium battery in conditions of insufficient light. The duration of the battery can
be optimised by using the energy saving function to set the cut in time and the installation operating distance.
Self-locking adjustable lens which can be rotated horizontally through plus or minus 90° and vertically through plus
or minus 30° with respect to the standard installation position.