RCQ508W00 MULTIPROTOCOL INTERFACE

RCQ508W00 – 868MHz MULTIPROTOCOL INTERFACE IN BOX (12 / 24Vac-dc).

RCQ508W00 – 868MHz MODULAR STANDARD OUTDOOR MULTIPROTOCOL INTERFACE IN BOX (12 / 24Vac-dc).
Power supply 12/24Vac-dc.
Electrical input 20mA.
Overall dimensions 148 x 118 x 40.
All weather box in ABS – IP55.
Carrier frequency 868,3MHz.
The interface is able to decode a radio frequency signal coming
from a S504-S508 transmitter or via cable from a DKS1000T,
DKSTPT, DKSDUALT and output a Wiegand/ISO-3554 digital signal,
containing the transmitter code, in 13 different formats.
It is fitted with a USB for connection to a PC and an input that can be
connected to a timer or a switch with the aim of enabling or disabling
the interface over different time periods. Rolling Code management
with transmitter memorization on the interface.

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

MULTIPROTOCOL INTERFACE RCQ508W00

The RCQ508W00 MULTIPROTOCOL INTERFACE are available in all the classic Cardin versions: outdoor receivers 12-
24V with display, with LCD display and 3G/WiFi functions, 230V radio programmers
in watertight cases with flip up access covers, mini receiver units to be installed in
appliances which already have a protective casing and slot-in receiver cards for direct
insertion into host appliances designed to receive them:
– outdoor receiver with a multi-decoding module S449 – S486 – S504 – S508,
LCD display and 3G-WiFi functions;
– standard outdoor receivers;
– outdoor receivers with display;
– 2-channel mini receivers, slot-in receiver cards;
– 2-channel open collector receiver cards;
– outdoor radio programmers;
– multiprotocol interface.

MULTIPROTOCOL INTERFACE RCQ508W00 WITH LCD DISPLAY AND 3G/WiFi FUNCTIONS

Thanks to the inbuilt 2G-3G or WiFi module of RCQ508W00 MULTIPROTOCOL INTERFACE , avant-garde software and a highly
efficient signal reception apparatus the receivers allows the remote management
(without range limits) of all installations that require remote control via radio (automatic
entry systems, access control, car-parks etc.).

The appliance is ideally suited to multi-user installations (up to 3000 transmitters can be memorised)
and ones that require frequent upgrading and modification of the codes. The USB connection, the
programming and setting buttons and the efficient display allow the appliance to
be easily configured. The installation management functions are: transmitter code
memorization/ cancellation and programming the function mode for each single
output.
The receiver can manage up to four programmable channel modules (impulsive/
ON-OFF/timer controlled, NO/NC contact type and power on reset).

Technical description  MULTIPROTOCOL INTERFACE RCQ504W00

The RCQ508W00 MULTIPROTOCOL INTERFACE also features a Real Time Clock which can be used to set the time bands during
which the outputs are active.
It also features, the RCQ508W00 MULTIPROTOCOL INTERFACE, as well as a non volatile memory module which can
store up to 100000 relay activation events which may be downloaded during a normal connection and consulted at will.

CARDINTX_SW

The CARDINTX_SW software that can be downloaded from the website www.cardin.
It allows the stored user codes to be managed by means of one of three possible connection methods: direct via USB
cable, using the mobile communications network with a 2G/3G module or using a
WF module.

One or more outputs of RCQ508W00 MULTIPROTOCOL INTERFACE can be remotely activated over the phone or via
SMS with an installed 2G/3G module or using an App.

Four independent inputs are also available which can be used to monitor external
appliances the status of which can be obtained from the receiver via SMS or an App.
Using the Cardin software it is possible to set the receiver’s 4 inputs according
to the requirements of the installation.
As soon as an event such as resetting the position status of the door, security devices intervening, presence/absence of power
etc. is detected, the receiver will send a personalised message to the pre-registered
e-mail addresses.
Thanks to this system the 3G receiver becomes a very useful maintenance management tool.

RCQ504W00 ACCESSORIES

MCCMORPHM1  : STRIP WITH 1 PROGRAMMABLE RELAY (S504 – S508)
The relay can be set on the receiver to one of the functions.

CODE MEMORY MODULES RCQ504NC1 ….
Extractable and furnished with non volatile memory, this EEPROM
contains the system code
MCC24LC64 : 1000-CODE MEMORY MODULE
(RECEIVERS S504D1-S508D1) VERTICAL
ZGB24LC64-I/P : 1000-CODE MEMORY MODULE (S504 – S508)

RSQSPP : SLOT-IN RECEIVER ADAPTOR
Allows you to use the AMP 10-way receiver card connector as a
standard terminal block.

ANS400    : AERIAL FOR 433MHz RECEIVERS
ANQ800-1 : AERIAL FOR 868MHz RECEIVERS
ZVCRG58  : COAXIAL CABLE RG58 (per metre)

ANSKITGSMWF10 : KIT AERIAL EXTENSION 2G – 3G WiFi 10m SMA-M
ANSKITGSMWF5  : KIT AERIAL EXTENSION 2G – 3G WiFi 5m SMA-M

XRP03 : LITHIUM BATTERY 3V (2 X CR2032)

QUARTZ RECEIVER/TRANSCEIVER MODULE (433MHz – 868MHz)
Superheterodyne in FM with a digital filter.
Unidirectional (DG) and bidirectional (DG) versions.
RF module without decoder for the reception of digital signals.
Voltage: 5Vdc – Electrical input: 15mA.
Overall dimensions 40 x 20 x 13.
JRF433QFMDG1
JRF868QFMDG1
JRF433QFMBD0
JRF868QFMBD0