KT-RQM504C1-TXQ504C2

KT-RQM504C1  TXQ504C2 :
RQM504C1 – 433MHz STANDARD MIN 1-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
TXQ504C2 – 2-FUNCTION PRECODED TRANSMITTER (433MHz)

KIT-RQM504C1  TXQ504C2 : MIN 1-CHANNEL RECEIVER (433MHz)
+ 4 TXQ504C2 – 2-FUNCTION PRECODED TRANSMITTER (433MHz)

n. 1 – RQM504C1  – MIN 1-CHANNEL RECEIVER (433MHz) (12/24Vac-dc)

N. 4 – TXQ504C2 – QUARTZ TRANSMITTER DIGITAL REMOTE RADIO CONTROL WITH ROLLING CODES
                                2-function pre-coded remote control radio transmitter (433MHz)

KIT ON OFFER !!!!!!!!!!!!!!! to introduce CARDIN technology

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

KT-RQM504C1 TXQ504C2 : RECEIVER AND TRANSMITTER DESCRIPTION

RQM504C2 – 433MHz STANDARD INDOOR MINI 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
The unit RQM504C2 is an electronic circuit with a 10-way terminal block; Fitted with 2 relay
channels which can be set to ON/OFF or impulsive.
Possibility of memorising up to 1000 codes.

ABS indoor enclosure – IP20.
Overall dimensions(mm) 80 x 50 x 22.

TXQ504C2 – PRECODED TRANSMITTER – REMOTE RADIO CONTROL OR RADIO CONTROL
The TXQ504C2 transmitter container in shockproof plastic material.
3V lithium battery power supply CR2032.
Overall dimensions 35 x 80 x 11.

Radio system
433MHz – 868MHz FM ROLLING CODE
2128 CODE COMBINATIONS
REMOTE TRANSMITTER MEMORISATION
RFID: WIRELESS MEMORY
AERIAL ANS400 – ANQ800-1
An extremely secure state-of-the-art radio control system with 128 bit cryptography.
The system has gathered together a series of specific appliances under a single working protocol
aimed at the remote control of automatic and security installations.

RECEIVERS

The receivers,fundamental in every automation, are available in all the classic Cardin versions: outdoor receivers 12-
24V with display, with LCD display and 3G/WiFi functions.
230V radio programmers in watertight cases with flip up access covers.
mini receiver units to be installed in appliances which already have a protective casing and slot-in receiver cards for direct
insertion into host appliances designed to receive them.
They are:,
– outdoor receiver with a multi-decoding module S449 – S486 – S504 – S508,
LCD display and 3G-WiFi functions;
– standard outdoor receivers;
– outdoor receivers with display;
– 2-channel mini receivers, slot-in receiver cards;
– 2-channel open collector receiver cards;
– outdoor radio programmers;
– multiprotocol interface.

RECEIVERS WITH LCD DISPLAY AND 3G/WiFi FUNCTIONS

Thanks to the inbuilt 2G-3G or WiFi module, avant-garde software and a highly
efficient signal reception apparatus the receivers allows the remote management
(without range limits) of all installations that require remote control via radio (automatic
entry systems, access control, car-parks etc.).

The appliance is ideally suited to multi-user installations (up to 3000 transmitters can be memorised)
and ones that require frequent upgrading and modification of the codes.
The USB connection, the programming and setting buttons and the efficient display allow the appliance to
be easily configured.
The installation management functions are: transmitter code memorization/
cancellation and programming the function mode for each single output.
The RQM504C2 receiver can manage up to four programmable channel modules (impulsive/
ON-OFF/timer controlled, NO/NC contact type and power on reset).

Technical description of the receiver

The RQM504C2 receiver also features a Real Time Clock which can be used to set the time bands during
which the outputs are active.
It also features, the RQM504C2 receiver, as well as a non volatile memory module which can
store up to 100000 relay activation events which may be downloaded during a normal connection and consulted at will.

NETWORK CONNECTIVITY

The S504 – S508 range interacts with an evolved system consisting of a server dedicated to the 3G/WF connection by means of appliances and software for computers and smart phones.

DIGITAL ROLLING CODE TRANSMITTERS 128 BIT WITH 2/4/8 CHANNELS

The TXQ508BD2 transceiver , powered by a 3-volt lithium batteries (1 x CR2032) with a range of from 100 to 150 metres, are pre-coded in the factory with a unique identification number printed on the rear so as to allow memorisation in lots on the receiver and can be enabled without the presence of the receivers from a remote location through the use of a second transmitter that has already been memorised in the system.
They are fitted with a key-lock function which when selected protects the appliance from any accidental activation and automatic shut down that cuts in after at least twenty seconds of continuous activation in order to reduce battery consumption.
The bidirectional transmitters (transceivers) receive a confirmation signal allowing you to control an operation from a remote location.

TXQ508BD2 QUARTZ RECEIVERS WITH THE POSSIBILITY OF MEMORISING UP TO 1000 USER CODES

The TXQ508BD2 transceiver are available in all the classic Cardin versions: outdoor receivers 12-24V with display, with LCD display and 3G/WF functions in watertight cases IP55, mini receiver units to be installed in appliances which already have a protective casing and slot-in receiver cards for direct insertion into host appliances designed to receive them.
A code and memory programming base via USB allows the transmitters to be memorised in blocks and access to the remote memorisation function thanks the to RFID technology fitted into the transmitters.
AVAILABLE TRANSMITTER CHANNELS 2-4-8
AVAILABLE TRANSCEIVER CHANNELS 2-4
RANGE 100 – 150 m
MORE THAN 4 BILLION PRE-CODED TRANSMITTER CODES
RADIO CONTROL SYSTEMS

CARDINTX_SW

The CARDINTX_SW software that can be downloaded from the website www.cardin.it..
It allows the stored user codes to be managed by means of one of three possible connection methods: direct via USB
cable, using the mobile communications network with a 2G/3G module or using a
WF module.

One or more outputs can be remotely activated over the phone or via
SMS with an installed 2G/3G module or using an App.

Four independent inputs are also available which can be used to monitor external
appliances the status of which can be obtained from the receiver via SMS or an App.
Using the Cardin software it is possible to set the RQM504C2 receiver ’s 4 inputs according
to the requirements of the installation.
As soon as an event such as resetting the position status of the door, security devices intervening, presence/absence of power
etc. is detected, the receiver will send a personalised message to the pre-registered
e-mail addresses.
Thanks to this system the 3G receiver becomes a very useful maintenance management tool.