KT-BLTOW24

KT BLTOW24 – COMPLETE KIT BLTOW24 SERIES WITH 24V MOTOR

KIT KT-BLTOW24 IS IN PHASE OUT –
REPLACED WITH KIT : KT-BLGRIFFE24 or KT-BLGRIFFE24T

KT BLTOW24  –COMPLETE KIT BLTOW24 SERIES – WITH 24V ENCODER
SWING GATE MAX. 200KG 2,5M

OPERATING USE
Particularly suited for installations with narrow columns that require the mounting
base to be less than 180mm in width and also for gates where the hinges are
not aligned to the edge of the column and with gate leaves of up to 2 metres
in length (2,5m with an electric lock) 200kg maximum weight.

BLTOW24M : SELF-LOCKING MASTER UNIT
with a 24V encoder-controlled motor, electronic programmer, 433MHz
FM receiver, battery charger and NiMH batteries.
BLTOW24S : SELF-LOCKING SLAVE UNIT
driving the second gate.
TXQ504C4 : 2 4-CHANNEL TRANSMITTERS
433MHz FM ROLLING CODE.
CDR999 : PAIR OF PHOTOCELLS
in class 3 with adjustable lens, range 10m.
ICON : LED WARNING LIGHT
24V – 230V with an in-built aerial.
CABP10 : 10-METRE WIRING CABLE
with end sleeves.
TARGA-INT : INTERNATIONAL WARNING SIGN
in PP, multi-language.

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

BLTOW24M MASTER- ELECTROMECHANICAL GROUP WITH 24V MOTOR

BLTOW24M MASTER  – SELF-LOCKING GROUP WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES(optional)

BLTOW24M MASTER and BLTOW24S SLAVE Encoder-controlled self-locking Master unit for swing gate with hinged arms including:
– electronic programmer;
– 433MHz FM receiver;
– gate movement signalling via led (optional).
Kit battery charger + batteries to be ordered separately.
Particularly suited for installations with narrow columns that require
the mounting base to be less than 180mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with an
electric lock), 200kg maximum weight.
Manual release is carried out using a practical locking – unlocking
lever protected by a security key.
Operator arm included.

BLTOW24M MASTER – ELECTROMECHANICAL UNIT WITH 24V MOTOR

KT BLTOW24 a complete automatic SYSTEM e for swing gate with one or two gate leaves, the system is made
up of a Master unit and a Slave unit powering the second hinged gate.

Installation is facilitated and the geared motor is well anchored by the special practical cast
aluminium wall (or column) bracket predisposed for any type of fastening.
The compact and robust fastening bracket allows the automation to be fitted to very narrow
columns. The extremely robust cast aluminium operator arms are fitted with joints for all
applications and are able to drive hinged gates with different constructive characteristics.

Electronic programmer of KT BLTOW24   is factory fitted with a graphic LCD display (128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including: the sequential button mode, automatic reclosing, warning lamp preflashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting etc.

Control units with LC

The electronics card of KT BLTOW24 , thanks to the presence of the real-time
clock, allows you to set 10 events (shown on the display).
These events permit you to regulate the opening and closing of the motor at different times during the
day within 3 weekly time bands (Mon-Fri, Sat-Sun, Mon-Sun).
The events can be enabled or disabled (during holiday periods) either from the menu or by means of a radio
channel.

Repositioning takes place automatically whenever foreign objects get in the way of
the gate as it is moving. The electronic control unit of KT BLTOW24 is completed by the anti-crush and “soft start” and “soft stop” functions.
Compatible with the INTPRG-3G/WF system that allows the monitoring and programming of
system parameters from remote positions.
Multi-decoding:
The product range is factory fitted with a multi-decoding remote control module (system
S449 – S486 – S504 – S508).

OPERATOR ARM TECHNICAL SPECIFICATIONS KT BLTOW24

KT BLTOW24 Motor power supply                   Vdc           24
Nominal electrical input                                 A              3
Power input                                                  W             50
Duty cycle                                                     %            70
Opening time 90°                                           s             13
Maximum opening angle                                  °             120
Maximum torque                                            Nm          250
Protection grade                                             IP            54
* using a straight operator arm

ELECTRONIC PROGRAMMER TECHNICAL DATA

Power supply                                            Vac 230
Nominal electrical input                             A 1,2
Maximum power yield                                W 250
Power output for 1 or 2 motors                   W 60 + 60
Class II device Cls

BUILT IN RECEIVER CARD

Reception frequency                                       MHz 433.92 / 868,3
Number of channels / number of functions       No 4 / 8
Number of stored codes                                  No 300 / 1000

ACCESSORIES KT BLTOW24

BLT24ARM : STANDARD HINGED OPERATOR ARM
in spray-painted cast aluminium.

BLTS24DRM: STRAIGHT ARM WITH SLIDING GUIDE
in spray-painted cast aluminium.

KBNIMH-1 : KIT BATTERY CHARGER + NIMH BATTERIES
Allows the BLTOW24M unit to work during blackouts.

CABPC10 : 10m CABLE
with end sleeves.

LED BLTOW : LED LIGHTS
Gate movement signalling indicated by leds FOR BLTOW24M MASTER and Slave