KT-BLGRIFFE24T MOTOR KIT

KT-BLGRIFFE24T – KIT BLGRIFFE24TM – ELECTROMECHANICAL GROUP WITH 24V MOTOR

BLGRIFFE24TM MASTER  – SELF-LOCKING GROUP MOTOR WITH MECHANICAL LIMIT SWITCH 24V MAX. 200KG + NIMH BATTERIES(optional)
BLGRIFFE24TM MASTER Encoder-controlled self-locking Master unit for swing gate with hinged arms including:
– electronic programmer;
– 433MHz FM receiver;
– Operator hinged arm included.
Kit battery charger + batteries to be ordered separately.

KIT CONTENTS :  KT-BLGRIFFE24T

BLGRIFFE24M – MASTER SELF-LOCKING GROUP
with 24V motor controlled by encoder, programmer electronic,
433MHz FM receiver, battery charger and NiMH batteries.

BLGRIFFE24S – SLAVE SELF-LOCKING GROUP
to automate the second door.

ICON – LED FLASHING LIGHT 24V – 230V
with built-in antenna.

RSQ504OC2 – 2 CHANNEL RECEIVER OPEN COLLECTOR
DUAL-CHANNEL CARD RECEIVER plug-in open collector 433MHz.
Versions for the S508 – S486 – S449 and EDGE series are available on request.

TXQ504C4 – 2 4-FUNCTION TRANSMITTERS
433MHz FM ROLLING CODE.

CDR999 – PAIR OF SURFACE PHOTOCELLS
in class 3 with adjustable optics, 10m range.

CABPC10 – 10m CONNECTION CABLE
with pre-insulated end tubes.

PLATE-INT  – INTERNATIONAL WARNING PLATE
in multilingual PP.

USING IN
Particularly suited for installations with narrow columns that require
the mounting base to be less than 180mm in width and also for swing
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with an
electric lock), 200kg maximum weight.
Manual release is carried out using a practical locking – unlocking
lever protected by a security key.

BLGRIFFE24TM MASTER – ELECTROMECHANICAL UNIT WITH 24V MOTOR
CARDIN AUTOMATION SERIES BLGRIFFE SWING GATES

BLGRIFFE24TM MASTER Hinged operator arm automation designed to handle swing gates with one or two gate leaves.
Includes a master unit with an in-built electronic programmer and a slave unit powering the
second swing-to gate, both acting in synch.
Perfect for residential applications with small gates and narrow columns, it fits seamlessly
into the fixed structure without altering the appearance of the gate and is the ideal choice for
effective and reliable gate control, ensuring safety and convenience in any situation – a perfect
combination of technology, design and precision.
The compact and robust fastening bracket allows the automation to be fitted to very narrow
columns. The extremely robust cast aluminium operator arms are fitted with joints for all
applications and are able to drive hinged gates with different constructive characteristics.
Manual release is carried out using a practical locking – unlocking lever protected
by a security key.
The use of direct current motors increases the performance, guarantees high
efficiency, long life and silent running.
The integrated programmer employs mechanical travel limit controlled gate positioning.
Repositioning takes place automatically whenever foreign objects get in the way of the gate
as it is moving. The elec-tronic control unit is completed by the anti-crush and “soft start” and
“soft stop” functions.
Compatible with the INTPRG-3G/WF system that allows the monitoring and programming of
system parameters from re-mote positions.
Kit including battery charger and batteries to be ordered separately.

Control units with LC

The electronic programmer is factory fitted with a graphic LCD display (128
x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including: the sequential button
mode, automatic reclosing, warning lamp pre-flashing, intermittent warning
lamp activation, indicator light and photoelectric cell function setting etc.
The electronics card, thanks to the presence of the real-time clock, allows
you to set 10 events (shown on the display) and these events permit you to
regulate the opening and closing of the motor at different times during the
day within 3 weekly time bands (Mon-Fri, Sat-Sun, Mon-Sun); the events
can be enabled or disabled (during holiday periods) either from the menu or
by means of a radio channel.
This version of the product is factory fitted with a multi-decoding remote
control module (system S449 – S486 – S504 – S508).
By default the devices are supplied with a 433MHz RF module and the
S504 / S508 series memory module inserted. To control the device with
S449 transmitters, insert the ZGB24LC16-I / P memory module (supplied
with the device) and consult the relevant section. For the S508 / S486
series purchase and insert the 868Mhz RF module.
SELF-PROGRAMMING MONITORED BY AN LCD GRAPHICS DISPLAY
Compatible with the data exchange system
between digital devices (smartphone, tablet, etc.)
and the Cardin multifunctional control units.
See section 24V ECU INTERFACE DEVICES on page 178 CARDIN AUTOMATION SERIES BLGRIFFE

OPERATOR ARM TECHNICAL SPECIFICATIONS BLGRIFFE24TM MASTER

BLTOW24M MASTER Motor power supply       Vdc           24
Nominal electrical input                                 A             2
Power input                                                  W             50
Duty cycle                                                     %            70
Opening time 90°                                           s             16
Maximum opening angle                                  °             120
Maximum torque                                            Nm          250
Protection grade                                             IP            54
* using a straight operator arm

ELECTRONIC PROGRAMMER TECHNICAL DATA

Power supply                                            Vac 230
Nominal electrical input                             A 0,8
Maximum power yield                                W 180
Power output for 1 or 2 motors                   W 70 + 70
Class II device Cls

BUILT IN RECEIVER CARD

Reception frequency                                       MHz 433.92 / 868,3
Number of channels / number of functions       No 4 / 8
Number of stored codes                                  No 300 / 1000

ACCESSORIES BLGRIFFE24TM MASTER

SUNPOWER POWER SUPPLY KIT
Solar panels for use with all 24Vdc automation.

BLGRIFFEDRM : STRAIGHT ARM WITH SLIDING GUIDE
in spray-painted cast aluminium.

KBNIMH-1 : KIT BATTERY CHARGER + NIMH BATTERIES
Allows the BLGRIFFEDRM unit to work during blackouts.

CABPC10 : 10m CABLE
with end sleeves.