KT-BL824DCB

KT BL824DCB – COMPLETE KIT SERIES BL824ACB 24 MOTOR

KT BL824DCB IS IN PHASE OUT –
REPLACED WITH KIT : KT-BLGRIFFE24 or KT-BLGRIFFE24T

KT BL824DCB  – COMPLETE KIT SERIES BL824MCB – WITH ENCODER 24V
SWING GATES MAX. 200KG

OPERATIONAL USE
Particularly suited for installations with narrow columns that require the
mounting base to be less than 150mm in width and also for gates where the
hinges are not aligned to the edge of the column and with gate leaves of up
to 2 metres in length (2,5m with an electric lock) 200kg maximum weight.

BL824MCB : SELF-LOCKING MASTER UNIT
with a 24V encoder-controlled motor as master of the swing gates,
electronic programmer, 433MHz FM receiver, battery charger and NiMH batteries.
BL824S : SELF-LOCKING SLAVE UNIT
driving the second swing gates.
BL824DRM : 2 STRAIGHT ARMS WITH A SLIDING GUIDE
in spray-painted cast aluminium.
TXQ504C4 : 2 4-CHANNEL TRANSMITTERS
433MHz FM ROLLING CODE.
CDR999 : PAIR OF PHOTOCELLS
in class 3 with adjustable lens, range 10m.
ICON : LED WARNING LIGHT
24V – 230V with an in-built aerial
CABPC10 : 10-METRE WIRING CABLE
with end sleeves.
TARGA-INT :INTERNATIONAL WARNING SIGN
in PP, multi-language.

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

KT-BL824DCB DESCRIPTION OF THE MAIN COMPONENTS

BL824MCB MOTOR  – SELF-LOCKING GROUP MASTER AND SLAVE WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES FOR SWING GATE WITH HINGED ARM

 BL824MCB MOTOR MASTER Encoder-controlled self-locking Master unit including:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.
Particularly suited for installations with narrow columns that require
the mounting base to be less than 150mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with a hinged
arm and an electric lock) 200kg maximum weight.
Manual release is carried out using the hexagonal key located inside
the side panel.
Operator arm to be ordered separately.

BL824DCB – ELECTROMECHANICAL UNIT WITH 24V MOTOR

KT BL824DCB a complete automatic device for swing gates with one or two gate leaves,
the system is made up of a Master unit and a Slave unit powering the second hinged gate.

Installation is facilitated and the geared motor is well anchored by the special practical cast
aluminium wall (or column) bracket predisposed for any type of fastening.
The compact and robust fastening bracket allows the automation to be fitted to very narrow
columns. The extremely robust cast aluminium operator arms are fitted with joints for all
applications and are able to drive hinged gates with different constructive characteristics.

The electronic programmerof KT BL824DCB is factory fitted with a graphic LCD display (128 x 128 pixels)
with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp preflashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting etc.

Control units with LC

The electronics card OF KT BL824DCB , thanks to the presence of the real-time
clock, allows you to set 10 events (shown on the display).
These events permit you to regulate the opening and closing of the motor at different times during the
day within 3 weekly time bands (Mon-Fri, Sat-Sun, Mon-Sun).
The events can be enabled or disabled (during holiday periods) either from the menu or by means of a radio
channel.

Repositioning takes place automatically whenever foreign objects get in the way of
the gate as it is moving. The electronic control unit of KT BL824DCB is completed by the anti-crush and “soft
start” and “soft stop” functions.
Compatible with the INTPRG-3G/WF system that allows the monitoring and programming of
system parameters from remote positions.
Multi-decoding:
The product range is factory fitted with a multi-decoding remote control module (system
S449 – S486 – S504 – S508).

OPERATOR ARM TECHNICAL SPECIFICATIONS BL824MCB MOTOR MASTER

KT BL824DCB Motor power supply                  Vdc           24
Nominal electrical input                                 A              2 3 2
Power input                                                  W             50
Duty cycle                                                     %            70
Opening time 90°                                           s             14 (12*)
Maximum opening angle                                  °             130
Maximum torque                                            Nm          270
Protection grade                                             IP            44
* using a straight operator arm

ELECTRONIC PROGRAMMER TECHNICAL DATA

Power supply                                            Vac 230
Nominal electrical input                             A 1,2
Maximum power yield                                W 250
Power output for 1 or 2 motors                   W 60 + 60
Class II device Cls

BUILT IN RECEIVER CARD

Reception frequency                                       MHz 433.92 / 868,3
Number of channels / number of functions       No 4 / 8
Number of stored codes                                  No 300 / 1000

ACCESSORIES KT BL824ACB

BL824ARM : STANDARD HINGED OPERATOR ARM
in spray-painted cast aluminium.

BL824DRM : STRAIGHT ARM WITH SLIDING GUIDE
in spray-painted cast aluminium.

BL3924GU2 : 1000mm GUIDE FOR SPECIAL OPENING REQUIREMENTS
in aluminium.
Lots of 2 pcs.

KBNIMH-3 : KIT BATTERY CHARGER + NIMH BATTERIES
Allows the KT BL824DCB unit for swing gate to work during blackouts.

CABPC10 : 10m CABLE
with end sleeves.

N°                         300 / 1000