CARDIN Control Unit type PRO and TRADE
-
T101 CONTROL UNIT
T101 ELECTRONI CONTROL UNIT 230V
T 101 ELECTRONIC CONTROL UNIT FOR TWO 230V MOTORS
Control unit T101 for 1 motor 230 Vdc, with torque adjustment, slowing down and encoder.
Encoder controlled programmer with torque limitation, deceleration
and safety device exclusion via dip-switch:
– new external 32VA transformer;
– third programming button;
– flashing warning light output;
– second channel OC2 output (contact US1);
– terminal blocks for motor capacitor connection;
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€122,00 + TAXT101 CONTROL UNIT
€122,00 + TAX -
T201 ELECTRONIC CONTROL UNIT
T201 – ELECTRONIC CONTROL UNIT
T201 – ELECTRONIC CONTROL UNIT IS PHASE OUT
IT IS REPLACED BY THE T600 – ELECTRONIC CONTROL UNITT201 – ELECTRONIC CONTROL UNIT
Control unit to controll 1/2 230V motors with torque regulation and slowing down.
It can operate with or without encoder.
Equipped with self-learning function.
Connector for radio receiver OC2 series.
Inputs for the stroke end.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€176,00 + TAXT201 ELECTRONIC CONTROL UNIT
€176,00 + TAX -
PRG383TCE
PRG383TCE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR
PRG383TCE – CONTROL UNIT IN PHASE OUT
REPLACED BY PRG400TEPRG383TCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 230V 400V.
INDUSTRIAL PROGRAMMER CONTROLLING ONE SINGLE PHASE / THREE PHASE MOTOR
ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS
– 370W single phase power supply 230Vac,
– 700W three phase power supply 400Vac.Automatic, semiautomatic, manual and remote control functions.
Command inputs TA, TB, TC, TD, TAL.
Incorporated door security switch.
Optional external control buttons.
Electric brake output.
Interface for a standard slot-in radio receiver card.
Supplied with 4 x Ø16mm cable glands.
The control unit is supplied with 4 x Ø16mm cable glands.
The PRG383TCE control unit is Suitable for the control of industrial gates and doors with one three phase motor.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
T400 CONTROL UNIT
T400 ELECTRONIC CONTROL UNIT 400/230V
T400 / T 400 ELECTRONIC CONTROL UNIT FOR ONE 400 V THREEPHASE MOTOR OR ONE SINGLEPHASE 230V MOTOR
CONTROL UNIT T400 Operation with or without encoder control.
Complete with self-learning function, two separate connections for
balanced safety edges (EN 12978). Connection for slot-in radio card. Travel limit inputs.
– new external 32VA transformer;
– third programming button;
– flashing warning light output;
– second channel OC2 output (contact US1);
– terminal blocks for motor capacitor connection;
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€229,00 + TAXT400 CONTROL UNIT
€229,00 + TAX -
T224 CONTROL UNIT
T224 – CONTROL UNIT MOTORS 24V
T224 – CONTROL UNIT IN PHASE OUT
REPLACED BY THE : T624T224 / T 224 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T224 for 2 motors 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€199,00 + TAXT224 CONTROL UNIT
€199,00 + TAX -
PRG3830CE
PRG3830CE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR
PRG3830CE – CONTROL UNIT IN PHASE OUT
REPLACED BY PRG400TEPRG383OCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 230V 400V.
INDUSTRIAL PROGRAMMER CONTROLLING ONE SINGLE PHASE / THREE PHASE MOTOR
ELECTRONIC CONTROL UNIT, BASIC VERSION
– 370W single phase power supply 230Vac,
– 700W three phase power supply 400Vac.Automatic, semiautomatic, manual and remote control functions.
Command inputs TA, TB, TC, TD, TAL.
Incorporated door security switch.
Optional external control buttons.
Electric brake output.
Interface for a standard slot-in radio receiver card.
Supplied with 4 x Ø16mm cable glands.
The control unit is supplied with 4 x Ø16mm cable glands.
The PRG383OCE control unit is Suitable for the control of industrial gates and doors with one three phase motor.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
TXQ504C4
TXQ504C4 – 4-FUNCTION PRECODED TRANSMITTER (433MHz)
TXQ504C4 – QUARTZ DIGITAL REMOTE CONTROL WITH ROLLING CODES
4-function pre-coded remote control radio transmitter (433MHz)
TXQ504C4 – PRECODED TRANSMITTER – REMOTE CONTROL OR RADIO CONTROL
The TXQ504C4 transmitter container in shockproof plastic material.
3V lithium battery power supply CR2032.
Overall dimensions 35 x 80 x 11.
Radio system
433MHz – 868MHz FM ROLLING CODE
2128 CODE COMBINATIONS
REMOTE TRANSMITTER MEMORISATION
RFID: WIRELESS MEMORY
AERIAL ANS400 – ANQ800-1If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€25,00€30,00+ TAXTXQ504C4
€25,00€30,00+ TAX -
RQM508C2
RQM508C2 – 868MHz STANDARD MIN 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
RQM508C2 – 868MHz STANDARD INDOOR MINI 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
The unit RQM508C2 is an electronic circuit with a 10-way terminal block; Fitted with 2 relay
channels which can be set to ON/OFF or impulsive.
Possibility of memorising up to 1000 codes.ABS indoor enclosure – IP20.
Overall dimensions(mm) 95 x 75 x 25.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€60,00 + TAXRQM508C2
€60,00 + TAX -
RSQ508OC2
RSQ508OC2 – 868MHz 2-CHANNEL SLOT-IN RECEIVER OPEN COLLECTOR (12 / 24Vac-dc).
RSQ508OC2 – 868MHz 2-CHANNEL SLOT-IN RECEIVER OPEN COLLECTOR (12 / 24Vac-dc).
The unit RSQ508OC2 Receivers Open collector card for direct insertion into a host appliance
designed to receive it. Impulsive channels.
Possibility of memorising up to 1000 codes.Overall dimensions(mm) 95 x 75 x 25.
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€40,00 + TAXRSQ508OC2
€40,00 + TAX -
PRG400TE UNIT
PRG400TE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR
PRG400TE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 400V.
ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS
– 2200W three phase power supply 400V.
Automatic, semiautomatic, manual and remote control functions.
Command inputs TA, TB, TC, TD, TAL.
Incorporated door security switch.
Optional external control buttons.
Electric brake output.
Interface for a standard slot-in radio receiver card.
The control unit is supplied with 4 x Ø16mm cable glands.
The PRG384TCE control unit is Suitable for the control of industrial gates and doors with one three phase motor.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€360,00 + TAXPRG400TE UNIT
€360,00 + TAX -
INTBTC4 – BLUETOOTH INTERFACE
INTBTC4 – BLUETOOTH INTERFACE IN BOX (12 / 24Vac-dc).
INTBTC4 – BLUETOOTH INTERFACE WITH FOUR RELAYS
The interface with a Bluetooth module allows the control of four relays
with NO or NC contacts. The selection dip-switches (one block per
relay) allow you to select the relay’s activation method: impulsive, ON/
OFF, timer controlled or remotely controlled relay activation using the
programming calender in the Cardin multiprotocol interface Cardin
RCQ504/508W00. The programming buttons (one per relay) allow
you to set the activation times for the relays (from 1 s to 5 min) for
the timer controlled mode.
The Bluetooth module MODBT is to be ordered separately.
Power supply 12/24Vac-dc.
Electrical input 50mA.
Overall dimensions 95 x 75 x 25.
Indoor box IP20If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€60,00 + TAXINTBTC4 – BLUETOOTH INTERFACE
€60,00 + TAX -
RPQ508T10 RADIOPROGRAMMERS SUN BLINDS AWNINGS
RPQ508T10 – 868MHz RADIOPROGRAMMERS SUN BLINDS AWNINGS (400W)
RPQ508T10 – 868MHz RADIOPROGRAMMERS FOR ROLLING SHUTTERS, SUN BLINDS
AND AWNINGS (230V-1000W)
Logic integrated into the receiver with work time management and output
for the control of one motor. Suitable for the command of automatic rolling
shutters, sun blinds and awnings. Inputs for one opening and one closing
command via cable. Manual operation in either the opening/closing or only
closing direction.
ndoor box IP20.
Overall dimensions 106 x 36 x 21.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€64,00 + TAXRPQ508T10 RADIOPROGRAMMERS SUN BLINDS AWNINGS
€64,00 + TAX
