Control units
-
T101 CONTROL UNIT
T101 ELECTRONI CONTROL UNIT 230V
T 101 ELECTRONIC CONTROL UNIT FOR TWO 230V MOTORS
Control unit T101 for 1 motor 230 Vdc, with torque adjustment, slowing down and encoder.
Encoder controlled programmer with torque limitation, deceleration
and safety device exclusion via dip-switch:
– new external 32VA transformer;
– third programming button;
– flashing warning light output;
– second channel OC2 output (contact US1);
– terminal blocks for motor capacitor connection;
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€122,00 + TAXT101 CONTROL UNIT
€122,00 + TAX -
T201 ELECTRONIC CONTROL UNIT
T201 – ELECTRONIC CONTROL UNIT
T201 – ELECTRONIC CONTROL UNIT IS PHASE OUT
IT IS REPLACED BY THE T600 – ELECTRONIC CONTROL UNITT201 – ELECTRONIC CONTROL UNIT
Control unit to controll 1/2 230V motors with torque regulation and slowing down.
It can operate with or without encoder.
Equipped with self-learning function.
Connector for radio receiver OC2 series.
Inputs for the stroke end.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€176,00 + TAXT201 ELECTRONIC CONTROL UNIT
€176,00 + TAX -
PRG807001
PRG807001 – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG807001 – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 450W.
Digital work time control separately memorised for each gate leaf guided by a
6-digit display. Possible operation without mechanical travel limits. Torque setting.
Maximum power initial thrust control, torque limitation and deceleration
management with deceleration zone control. The appliance is fitted with an
interface for the insertion of a standard Cardin radio receiver card.
Suitable for the control of automatic gates and doors with two 230V motors.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€153,00 + TAXPRG807001
€153,00 + TAX -
PRG383TCE
PRG383TCE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR
PRG383TCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 230V 400V.
INDUSTRIAL PROGRAMMER CONTROLLING ONE SINGLE PHASE / THREE PHASE MOTOR
ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS
– 370W single phase power supply 230Vac,
– 700W three phase power supply 400Vac.Automatic, semiautomatic, manual and remote control functions.
Command inputs TA, TB, TC, TD, TAL.
Incorporated door security switch.
Optional external control buttons.
Electric brake output.
Interface for a standard slot-in radio receiver card.
Supplied with 4 x Ø16mm cable glands.
The control unit is supplied with 4 x Ø16mm cable glands.
The PRG383TCE control unit is Suitable for the control of industrial gates and doors with one three phase motor.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
T400 CONTROL UNIT
T400 ELECTRONIC CONTROL UNIT 400/230V
T400 / T 400 ELECTRONIC CONTROL UNIT FOR ONE 400 V THREEPHASE MOTOR OR ONE SINGLEPHASE 230V MOTOR
CONTROL UNIT T400 Operation with or without encoder control.
Complete with self-learning function, two separate connections for
balanced safety edges (EN 12978). Connection for slot-in radio card. Travel limit inputs.
– new external 32VA transformer;
– third programming button;
– flashing warning light output;
– second channel OC2 output (contact US1);
– terminal blocks for motor capacitor connection;
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€229,00 + TAXT400 CONTROL UNIT
€229,00 + TAX -
T10 CONTROL UNIT
T 10 – ELECTRONIC CONTROL UNIT
T10 – ELECTRONIC CONTROL UNIT
Control unit for roller shutters, with built in receiver.
Ideal for tubular or shutter motors.
It can also control lighting systems with 2 lamps at 230V.
Inputs for via wire controls.
Built-in receiver compatible with EDGE, NOIRE and FM400 series.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount
€60,00 + TAXT10 CONTROL UNIT
€60,00 + TAX -
T21X CONTROL UNIT
T21X – ELECTRONIC CONTROL UNIT
T21X / T 21X CONTROL UNIT – ELECTRONIC PROGRAMMER CONTROLLING ONE 230V MOTOR
ECU for rolling grills or rolling shutters max. 1300W. Ideal for tubular
motors or rolling shutters and fitted with with torque limitation, a
programmable 24V warning light output (flashing or continuous
activation) and a 230V courtesy light output.
Protection grade IP55.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€75,00 + TAXT21X CONTROL UNIT
€75,00 + TAX -
T624 CONTROL UNIT
T624 – CONTROL UNIT MOTORS 24V
T624 / T 624 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T624 for 2 motors 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€199,00 + TAXT624 CONTROL UNIT
€199,00 + TAX -
PRG900CB
PRG900CB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
PRG900CB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS + charger and NiMH batteries
Electronic PRG900CB control unit programmer for the control of 24Vdc hinged gates with
intelligent time control functions that allow you to control the position of
the hinged and sliding gates, .The PRG900CB control uniti fitted with a multi-decoding module S449
– S486 – S504 – S508. Gate travel time programming is fully automatic
and guided by a 6-digit display which allows you to visualise the number
of manoeuvres carried out and to set several parameters such as the
type of motor, the torque setting and the limited opening distance.Dip-switches allow you to set the system parameters including: the
sequential button mode, automatic reclosing, warning lamp pre-flashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting and electric lock enable.PRG900CB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
PRG900CB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS + charger and NiMH batteries
Electronic PRG900CB control unit programmer for the control of 24Vdc hinged gates with
intelligent time control functions that allow you to control the position of
the hinged and sliding gates, .The PRG900CB control uniti fitted with a multi-decoding module S449
– S486 – S504 – S508. Gate travel time programming is fully automatic
and guided by a 6-digit display which allows you to visualise the number
of manoeuvres carried out and to set several parameters such as the
type of motor, the torque setting and the limited opening distance.Dip-switches allow you to set the system parameters including: the
sequential button mode, automatic reclosing, warning lamp pre-flashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting and electric lock enable.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€283,00 + TAXPRG900CB
€283,00 + TAX -
PRG3830CE
PRG383OCE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR
PRG383OCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 230V 400V.
INDUSTRIAL PROGRAMMER CONTROLLING ONE SINGLE PHASE / THREE PHASE MOTOR
ELECTRONIC CONTROL UNIT, BASIC VERSION
– 370W single phase power supply 230Vac,
– 700W three phase power supply 400Vac.Automatic, semiautomatic, manual and remote control functions.
Command inputs TA, TB, TC, TD, TAL.
Incorporated door security switch.
Optional external control buttons.
Electric brake output.
Interface for a standard slot-in radio receiver card.
Supplied with 4 x Ø16mm cable glands.
The control unit is supplied with 4 x Ø16mm cable glands.
The PRG383OCE control unit is Suitable for the control of industrial gates and doors with one three phase motor.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
TXQ504C2
TXQ504C2 – 2-FUNCTION PRECODED TRANSMITTER (433MHz)
TXQ504C2 – QUARTZ TRANSMITTER DIGITAL REMOTE RADIO CONTROL WITH ROLLING CODES
2-function pre-coded remote control radio transmitter (433MHz)
TXQ504C2 – PRECODED TRANSMITTER – REMOTE RADIO CONTROL OR RADIO CONTROL
The TXQ504C2 transmitter container in shockproof plastic material.
3V lithium battery power supply CR2032.
Overall dimensions 35 x 80 x 11.
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€23,00€28,00+ TAXTXQ504C2
€23,00€28,00+ TAX -
TXQ504C4
TXQ504C4 – 4-FUNCTION PRECODED TRANSMITTER (433MHz)
TXQ504C4 – QUARTZ DIGITAL REMOTE CONTROL WITH ROLLING CODES
4-function pre-coded remote control radio transmitter (433MHz)
TXQ504C4 – PRECODED TRANSMITTER – REMOTE CONTROL OR RADIO CONTROL
The TXQ504C4 transmitter container in shockproof plastic material.
3V lithium battery power supply CR2032.
Overall dimensions 35 x 80 x 11.
Radio system
433MHz – 868MHz FM ROLLING CODE
2128 CODE COMBINATIONS
REMOTE TRANSMITTER MEMORISATION
RFID: WIRELESS MEMORY
AERIAL ANS400 – ANQ800-1If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€25,00€30,00+ TAXTXQ504C4
€25,00€30,00+ TAX
