Control units

  • RCQ433-3G10

    RCQ433-3G10 – 433MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G + SIM VODAFONE FOR 10 YEARS

    RCQ433-3G10 – 433MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G FUNCTIONS (12/24Vac-dc) + SIM VODAFONE FOR 10 YEARS
    The RCQ433-3G10 receivers  can be fitted with up to four programmable relay
    modules MCCMORPHM1 (impulsive, ON-OFF or timer controlled).
    1 relay inserted.
    Possibility of memorising up to 3000 codes.
    USB connection and 2G-3G-WiFi module for remote user and
    activation of the output relays.
    The RCQ433/868-3G10 receivers include a 10 year subscription
    with our partner Vodafone.

    All weather box in ABS – IP55.
    Overall dimensions 135 x 175 x 85.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

     

    RCQ433-3G10

    378,00 + TAX
  • RCQ868-3G10

    RCQ868-3G10 – 868MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G + SIM VODAFONE FOR 10 YEARS

    RCQ868-3G10 – 868MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G FUNCTIONS (12/24Vac-dc) + SIM VODAFONE FOR 10 YEARS
    The RCQ868-3G10 receiver  can be fitted with up to four programmable relay
    modules MCCMORPHM1 (impulsive, ON-OFF or timer controlled).
    1 relay inserted.
    Possibility of memorising up to 3000 codes.
    USB connection and 2G-3G-WiFi module for remote user and
    activation of the output relays.
    The RCQ433/868-3G10 receivers include a 10 year subscription
    with our partner Vodafone.

    All weather box in ABS – IP55.
    Overall dimensions 135 x 175 x 85.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    RCQ868-3G10

    378,00 + TAX
  • CC242EXTOPCB

    CC242EXTOPCB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES

    CC242EXTOPCB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
    OF ONE OR TWO ENCODER-CONTROLLED MOTORS + charger and NiMH batteries

    Electronic CC242EXTOPCB control unit programmer for encoder-controlled 24Vdc motors that allow
    the precise position control of hinged and sliding gates fitted with a
    multi-decoding module S449 – S486 – S504 – S508.
    Batteries and battery charger in the CC242ETOPCB and
    CC242EXTOPCB versions.

    The electronic CC242EXTOPCB control unit programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to read the number of manoeuvres carried out
    and to rapidly set the system parameters including: the sequential button
    mode, automatic reclosing, warning lamp pre-flashing, intermittent
    warning lamp activation, indicator light, photoelectric cell function setting
    and electric lock enable etc.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    CC242EXTOPCB

    336,00 + TAX
  • CC242ETOPCB

    CC242ETOPCB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES

    CC242ETOPCB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
    OF ONE OR TWO ENCODER-CONTROLLED MOTORS + charger and NiMH batteries

    Electronic CC242ETOPCB control unit programmer for encoder-controlled 24Vdc motors that allow
    the precise position control of hinged and sliding gates fitted with a
    multi-decoding module S449 – S486 – S504 – S508.
    Batteries and battery charger in the CC242ETOPCB and
    CC242EXTOPCB versions.

    The electronic CC242ETOPCB control unit programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to read the number of manoeuvres carried out
    and to rapidly set the system parameters including: the sequential button
    mode, automatic reclosing, warning lamp pre-flashing, intermittent
    warning lamp activation, indicator light, photoelectric cell function setting
    and electric lock enable etc.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    CC242ETOPCB

    321,00 + TAX
  • SUNPOWER

    SUN POWER – KIT SOLAR PANEL POWER SUPPLY

    SUNPOWER / SUN POWER POWER SUPPLY KIT
    Solar panels for use with all 24Vdc automation marked with the
    SUNPOWER symbol (with the exception of the PARKSUN series that has
    built-in solar panels).
    Two solar panels complete with adjustable brackets.
    Watertight box with batteries, command electronics and charger.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    SUNPOWER

    301,00 + TAX
  • PRG384TCE

    PRG384TCE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR

    PRG384TCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 400V.
    ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS

    – 2200W three phase power supply 400V.
    Automatic, semiautomatic, manual and remote control functions.
    Command inputs TA, TB, TC, TD, TAL.
    Incorporated door security switch.
    Optional external control buttons.
    Electric brake output.
    Interface for a standard slot-in radio receiver card.
    The control unit is supplied with 4 x Ø16mm cable glands.
    The PRG384TCE control unit is Suitable for the control of industrial gates and doors with one three phase motor.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    PRG384TCE

    300,00 + TAX
  • PRG900CB

    PRG900CB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES

    PRG900CB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS + charger and NiMH batteries
    Electronic PRG900CB control unit programmer for the control of 24Vdc hinged gates with
    intelligent time control functions that allow you to control the position of
    the hinged and sliding gates, .

    The PRG900CB control uniti fitted with a multi-decoding module S449
    – S486 – S504 – S508. Gate travel time programming is fully automatic
    and guided by a 6-digit display which allows you to visualise the number
    of manoeuvres carried out and to set several parameters such as the
    type of motor, the torque setting and the limited opening distance.

    Dip-switches allow you to set the system parameters including: the
    sequential button mode, automatic reclosing, warning lamp pre-flashing,
    intermittent warning lamp activation, indicator light and photoelectric cell
    function setting and electric lock enable.

    PRG900CB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES

    PRG900CB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS + charger and NiMH batteries
    Electronic PRG900CB control unit programmer for the control of 24Vdc hinged gates with
    intelligent time control functions that allow you to control the position of
    the hinged and sliding gates, .

    The PRG900CB control uniti fitted with a multi-decoding module S449
    – S486 – S504 – S508. Gate travel time programming is fully automatic
    and guided by a 6-digit display which allows you to visualise the number
    of manoeuvres carried out and to set several parameters such as the
    type of motor, the torque setting and the limited opening distance.

    Dip-switches allow you to set the system parameters including: the
    sequential button mode, automatic reclosing, warning lamp pre-flashing,
    intermittent warning lamp activation, indicator light and photoelectric cell
    function setting and electric lock enable.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    PRG900CB

    283,00 + TAX
  • PRG3840CE

    PRG3840CE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR

    PRG3840CE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR 400V.
    – 2200W three phase power supply 400V.
    Automatic, semiautomatic, manual and remote control functions.
    Command inputs TA, TB, TC, TD, TAL.
    Incorporated door security switch.
    Optional external control buttons.
    Electric brake output.
    Interface for a standard slot-in radio receiver card.
    Supplied with 4 x Ø16mm cable glands.
    Suitable for the control of industrial gates and doors with one three
    phase motor.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    PRG3840CE

    276,00 + TAX
  • CC242ETOP

    CC242ETOP – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS

    CC242ETOP – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
    OF ONE OR TWO ENCODER-CONTROLLED MOTORS

    Electronic CC242ETOP control unit programmer for encoder-controlled 24Vdc motors that allow
    the precise position control of hinged and sliding gates fitted with a
    multi-decoding module S449 – S486 – S504 – S508.
    Batteries and battery charger in the CC242ETOPCB and
    CC242EXTOPCB versions.

    The electronic CC242ETOP control unit programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to read the number of manoeuvres carried out
    and to rapidly set the system parameters including: the sequential button
    mode, automatic reclosing, warning lamp pre-flashing, intermittent
    warning lamp activation, indicator light, photoelectric cell function setting
    and electric lock enable etc.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    CC242ETOP

    252,00 + TAX
  • RCQ433-3G

    RCQ433-3G – 433MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G FUNCTIONS IN BOX (12 / 24Vac-dc).

    RCQ868-3G – 433MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G FUNCTIONS (12/24Vac-dc)
    The RCQ433-3G receiver  can be fitted with up to four programmable relay
    modules MCCMORPHM1 (impulsive, ON-OFF or timer controlled).
    1 relay inserted.
    Possibility of memorising up to 3000 codes.
    USB connection and 2G-3G-WiFi module for remote user and
    activation of the output relays.
    The RCQ433/868-3G10 receivers include a 10 year subscription
    with our partner Vodafone.

    All weather box in ABS – IP55.
    Overall dimensions 135 x 175 x 85.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    RCQ433-3G

    245,00 + TAX
  • RCQ868-3G

    RCQ868-3G – 868MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G FUNCTIONS IN BOX

    RCQ868-3G – 868MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G FUNCTIONS (12/24Vac-dc)
    The RCQ868-3G receiver  can be fitted with up to four programmable relay
    modules MCCMORPHM1 (impulsive, ON-OFF or timer controlled).
    1 relay inserted.
    Possibility of memorising up to 3000 codes.
    USB connection and 2G-3G-WiFi module for remote user and
    activation of the output relays.
    The RCQ433/868-3G10 receivers include a 10 year subscription
    with our partner Vodafone.

    All weather box in ABS – IP55.
    Overall dimensions 135 x 175 x 85.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    RCQ868-3G

    245,00 + TAX
  • T400 CONTROL UNIT

    T400 ELECTRONIC CONTROL UNIT 400/230V

    T400 / T 400 ELECTRONIC CONTROL UNIT FOR ONE 400 V THREEPHASE MOTOR OR ONE SINGLEPHASE 230V MOTOR
    CONTROL UNIT T400 Operation with or without encoder control.
    Complete with self-learning function, two separate connections for
    balanced safety edges (EN 12978). Connection for slot-in radio card. Travel limit inputs.
    – new external 32VA transformer;
    – third programming button;
    – flashing warning light output;
    – second channel OC2 output (contact US1);
    – terminal blocks for motor capacitor connection;
    – connection for the keypad TAST3F;
    – BSA and BSC inputs for 8K2 safety edges.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    T400 CONTROL UNIT

    229,00 + TAX

Main Menu