-
T101 CONTROL UNIT
T101 ELECTRONI CONTROL UNIT 230V
T 101 ELECTRONIC CONTROL UNIT FOR TWO 230V MOTORS
Control unit T101 for 1 motor 230 Vdc, with torque adjustment, slowing down and encoder.
Encoder controlled programmer with torque limitation, deceleration
and safety device exclusion via dip-switch:
– new external 32VA transformer;
– third programming button;
– flashing warning light output;
– second channel OC2 output (contact US1);
– terminal blocks for motor capacitor connection;
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€122,00 + TAXT101 CONTROL UNIT
€122,00 + TAX -
PRG304E
PRG304E – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG304E – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 650W.
ELECTRONIC CONTROL UNIT, BASIC VERSION
Digital work time control. Command inputs: TA, TC and TB. Security inputs:
photocells, safety edge (N.C. contact or 8.2 kΩ), digital safety edge.
Output for a courtesy light 230Vac 300W and for a led warning light. The
appliance is supplied with a S449, 433MHz, FM decoder.
Suitable for the control of automatic rolling shutters.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€121,00 + TAXPRG304E
€121,00 + TAX -
METALDEC024X – SELF-CALIBRATING METAL DETECTOR 24V
METALDEC024X – SELF-CALIBRATING METAL DETECTOR 24V
METALDEC024X – SELF-CALIBRATION METALLIC MASS DETECTOR 24V MOUNTING ON DIN RAIL
Power supply:: 24Vac-dc 100mA
Sensitivity: 8 levels
Relay output: 2 (max 1A 30V)
Operating temperature range: -20°…+55°C
Protection grade: IP40
Overall dimensions: 101 x 71 x 35.DOUBLE RELAY WITH SERIAL EXCHANGE NO-NC
SENSITIVITY SELECTOR H-M-L AND RESET BUTTON
UNDECAL CONNECTION FOR DIN RAIL GUIDE
RAIL GUIDE SOCKET DIN 46277
SENSITIVITY SELECTION DIP-SWITCHESIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€120,00 + TAXMETALDEC024X – SELF-CALIBRATING METAL DETECTOR 24V
€120,00 + TAX -
METALD3 – SELF-CALIBRATING METAL DETECTOR 24V
METALD3 – SELF-CALIBRATING METALLIC MASS DETECTOR 24V
METALD3 – SELF-CALIBRATION METAL DETECTOR OR METALLIC MASS DETECTOR 24V
Power supply:: 24Vac-dc 100mA
Sensitivity: 4 levels
Relay output: 3 (max 1A 30V)
Operating temperature range: -20°…+55°C
Protection grade: IP40
Overall dimensions: 146 x 64 x 38..DOUBLE RELAY WITH SERIAL EXCHANGE NO-NC
SENSITIVITY SELECTOR H-M-L AND RESET BUTTON
UNDECAL CONNECTION FOR DIN RAIL GUIDE
RAIL GUIDE SOCKET DIN 46277
SENSITIVITY SELECTION DIP-SWITCHESIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€114,00 + TAXMETALD3 – SELF-CALIBRATING METAL DETECTOR 24V
€114,00 + TAX -
PRG302E
PRG302E – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG302E – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 600W.
Digital work time control. Possible operation without mechanical travel limits.
Command inputs: TA, TC, TD, TB. The appliance is fitted with an interface for the
insertion of a standard Cardin radio receiver card (complete with cable glands
Ø 2 x Ø9mm + Ø 2 x Ø16mm).
Suitable for the control of automatic road barriers.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€109,00 + TAXPRG302E
€109,00 + TAX -
DKS1000 – KIT KEYPAD + ITERFACE 4CH
DKS1000 – KEYBOARD + INTERFACE KIT
DKS1000 – KEYBOARD + INTERFACE KIT consists of two products:
DKS1000T – BACKLIT KEYBOARD
DKS1000R – 4CH INTERFACEDKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters.
DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€106,00 + TAXDKS1000 – KIT KEYPAD + ITERFACE 4CH
€106,00 + TAX -
CDR852A – PHOTOCELL
CDR852A – PHOTOCELL WITH SURFACE CONTAINER SHOCKPROOF IP66 RANGE 60M
CDR852A PHOTOCELL – PHOTOELECTRIC CELLS IN AN ALUMINIUM CASE IP66
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP66
Transmitter and receiver housed in a compact waterproof aluminium
case. Highly resistant spray painting.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR852A).CDR852A PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE 60m
The kit contains a pair of photoelectric cells with two pipe glands.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€103,00 + TAXCDR852A – PHOTOCELL
€103,00 + TAX -
TXQPRO504BD-4A
TXQPRO504BD-4A INDUSTRIAL ROLLING CODE TRANSMITTER / TRANSCEIVER
TXQPRO504BD-4A INDUSTRIAL TRANSCEIVER S504, FM DIGITAL REMOTE CONTROL WITH ROLLING CODES – EXTERNAL ANTENNA
4-function pre-coded remote control transmitter (433MHz)
Container in shockproof, water-proof material IP65.
Power supply 6V with lithium batteries 2 x CR123A.
Overall dimensions 50 x 145 x 26.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€103,00 + TAXTXQPRO504BD-4A
€103,00 + TAX -
TXQPRO508BD-4A
TXQPRO508BD-4A INDUSTRIAL ROLLING CODE TRANSMITTER / TRANSCEIVER
TXQPRO508BD-4A INDUSTRIAL TRANSCEIVER S504, FM DIGITAL REMOTE CONTROL WITH ROLLING CODES – EXTERNAL ANTENNA
4-function pre-coded remote control transmitter (868MHz)
Container in shockproof, water-proof material IP65.
Power supply 6V with lithium batteries 2 x CR123A.
Overall dimensions 50 x 145 x 26.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€103,00 + TAXTXQPRO508BD-4A
€103,00 + TAX -
CDR892C3-2 MINI PHOTOCELL
CDR892C3-2 / CDR 892C3-2 – MINI PHOTOCELL
WITH SURFACE MOUNT CASE IP55 RANGE 15MCDR 892C3-2 / CDR892C3-2 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
CDR892C3-2 / CDR 892C3-2 DOUBLE-RELAY PHOTOELECTRIC PHOTOCELLS
Power supply 12/24Vac-dc.
Range: 15m indoors – 10m outdoors.
Transmitter cable 15 metres – Receiver cable 10 metres.DUAL-BEAM MULTIPLEX INFRARED BARRIER
Overall dimensions 90 x 50 x 20.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€102,00 + TAXCDR892C3-2 MINI PHOTOCELL
€102,00 + TAX -
CDR973AX PHOTOCELL
CDR973AX – SURFACE MOUNTED PHOTOCELL WITH IP66 SHOCKPROOF CASE 15M RANGE
CDR973AX – PHOTOELECTRIC CELLS IN AN ALUMINIUM CASE IP66
Maximum range 15m
Power supply 12/24Vac-dc
Protection grade IP66
Transmitter and receiver housed in a compact waterproof aluminium
case. Highly resistant spray painting. Self locking adjustable lens
which can be rotated horizontally through plus or minus 90° and
vertically through plus or minus 30° with respect to the standard
installation position.
It is possible to connect up to 3 pairs of photocells and synchronize
the transmission (multiplex system).CDR973AX – SURFACE-MOUNT PHOTOELECTRIC CELL
The kit contains a pair of aluminium photoelectric cells with two
pipe glands.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€102,00 + TAXCDR973AX PHOTOCELL
€102,00 + TAX -
SRCKIT8 – KIT BI-CHANNEL UNIT + SAFETY EDGE INTERFACE
SRCKIT8E / SRCKIT4E – KIT SAFETY EDGE + INTERFACE + STATIONARY UNIT BI-CHANNEL 868MHz / 433MHz
SRCKIT8E / SRCKIT8 – KIT SAFETY EDGE INTERFACE + BI-CHANNEL STATIONARY TRANSCEIVER UNIT 868MHz
SRCRX8E / SRCTXE – SAFETY EDGE TRANSCEIVER INTERFACE
SRCTX8E / SRCRXE – BI-CHANNEL STATIONARY TRANSCEIVER UNIT
ROLLING CODE FM RADIO system. transmission frequency: 868MHz
SRCKIT4E – KIT SAFETY EDGE INTERFACE + BI-CHANNEL STATIONARY TRANSCEIVER UNIT 433MHz
SRCRX4E – SAFETY EDGE TRANSCEIVER INTERFACE
SRCTX4E – BI-CHANNEL STATIONARY TRANSCEIVER UNIT
ROLLING CODE FM RADIO system. transmission frequency: 868MHzSRCTX8E / SRCTX4E / SRCTXE – SAFETY EDGE TRANSCEIVER INTERFACE
Power supply 2 alkaline or lithium AA batteries.
Safety edge signal input NC/8.2kΩ.
Maximum radio signal range 20m.
Shockproof case IP65.SRCTX8E / SRCTX4E / SRCRXE – BI-CHANNEL STATIONARY TRANSCEIVER UNIT
Power supply 12/24Vac-dc.
Maximum radio signal range 20m.
8 safety devices – 2 safety outputs NC/8.2kΩ.
Shockproof case IP65.Before ordering, choose the frequency you want to purchase: 433MHz or 868MHz
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€99,00 + TAX