• CDR999 PHOTOCELL

    CDR999 – PHOTOCELL WITH  SURFACE MOUNT CASE
    IP55 RANGE 10M

    CDR999 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
    Maximum range 10m
    Power supply 12/24Vac-dc
    Protection grade IP55
    Transmitter and receiver housed in waterproof cases.
    Self locking adjustable lens which can be rotated horizontally
    through plus or minus 90° and vertically through plus or minus 30°
    with respect to the standard installation position.
    It is possible to connect up to 3 pairs of photocells and synchronize
    the transmission (multiplex system).
    Double relays on the receiver with digital control increase the security
    and safety level of the output part (the part that furnishes the at rest/
    alarm signal). Jumper for selecting the output contact mode (potential
    free or resistance 8, 2kΩ contacts).

    CDR999 PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 10m

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    CDR999 PHOTOCELL

    51,00 + TAX
  • CDRX12 PHOTOCELL

    CDRX12 – PHOTOCELL WITH  SURFACE MOUNT CASE
    IP55 RANGE 10M

    CDRX12 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55

    CDRX12 – HYBRID INFRARED BARRIERS PHOTOCELLS WITH ADJUSTABLE LENSES
    RECEIVER POWER SUPPLY 12/24Vac-dc
    PROJECTOR POWER SUPPLY 3V WITH A LITHIUM BATTERY
    MAXIMUM RANGE 10m
    PROTECTION GRADE IP55

    CDRX12 PHOTOCELLS are a next generation infrared safety system, particularly suited to the protection of passageways (traffic
    and pedestrian) that are fitted with automatic opening and closing systems. The electronic circuit respects the
    most up to date standards and regulations and conforms to the standard 3 of the UNI EN 13849-1 (update of the
    EN954-1). It is possible to connect up to 3 pairs of photocells and synchronise the transmission (multiplex system).
    The necessity of guaranteeing greater ambient noise immunity has led to the evolution of both the transmitter and
    receiver cards. The system is based on the criteria “resistance to single failure” that guarantees the maintenance of
    safety in case of electrical problems.
    The receiver should be installed close to the electronic programmer and wired up drawing its 12/24V power supply
    directly from the programmer while the projector can be installed on any surface and doesn’t require wiring. Power
    is supplied by a solar panel when light is present and by a 3V lithium battery when insufficient light is available.
    The batteries lifespan can be optimised by setting the energy saving function and varying the cut-in time and the
    installation distance between the two photoelectric cells.

    CDRX12 PHOTOCELL

    96,00 + TAX
  • COP

    COP

    COP Wall cover for fixing the APRO / VEDO / PASSO series on a pre-existing installation.
    Pack of 2 pcs.

    COP

    17,00 + TAX
  • CPM

    CPM

    CPM Plastic container to be walled in, for ILB SINCRO and SELCH.

  • CRL170 MOTOR FOR ROLLING SHUTTERS

    CRL170 / CRL 170 – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS

    CRL170 / CRL 170 SHUTTERS – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
    230V geared motor permitting a maximum lifting power of 180kg.
    An electric lock must be fitted to guarantee that the rolling shutter
    locks in the closed position.
    Precise and reliable, thanks to the integrated travel limits, this model
    may fitted to all types of rolling shutter with a 60mm or 48mm drive
    shaft diameter and a crown wheel diameter of 200mm e 220mm.
    Maximum rolling shutter height 6m.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • CRL170E MOTOR FOR ROLLING SHUTTERS

    CRL170E / CRL 170E – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS

    CRL170E / CRL 170E SHUTTERS – SELF-LOCKING GEARED MOTOR FOR ROLLING SHUTTERS
    230V geared motor permitting a maximum lifting power of 180kg.
    Precise and reliable, thanks to the integrated travel limits and
    standard electromagnetic lock, this model may fitted to all types of
    rolling shutter with a 60mm or 48mm drive shaft diameter and a
    crown wheel diameter of 200mm e 220mm.
    Maximum rolling shutter height 6m.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • CRL180E MOTOR FOR ROLLING SHUTTERS

    CRL180E / CRL 180E – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS

    CRL180E / CRL 180E SHUTTERS – SELF-LOCKING GEARED MOTOR FOR ROLLING SHUTTER
    230V geared motor permitting a maximum lifting power of 180kg.
    Precise and reliable, thanks to the integrated travel limits and
    standard electromagnetic lock, this model may fitted to all types of
    rolling shutter with a 76mm drive shaft diameter and a crown wheel
    diameter of 240mm.
    Maximum rolling shutter height 6m.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • CRL360DE DUBLE MOTOR FOR ROLLING SHUTTERS

    CRL360DE / CRL 360DE– REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS

    CRL360DE / CRL 360DE SHUTTERS – DUBLE SELF-LOCKING GEARED MOTOR FOR ROLLING SHUTTER AND GARAGE DOORS
    Two 230V geared motors permitting a maximum lifting power of 360kg.
    Precise and reliable, thanks to the integrated travel limits and
    standard electromagnetic lock, this model may fitted to all types of
    rolling shutter with a 76mm drive shaft diameter and a crown wheel
    diameter of 240mm.
    Maximum rolling shutter height 6m.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • DOMOPARKE

    DOMOPARKE – ELECTROMECHANICAL PARKING SAVER

    DOMOPARKE / DOMOPARK E – ELECTROMECHANICAL PARKING SAFE
    Automatic DOMOPARKE parking saver with inbuilt solar panel.
    It is completely independent from the mains power supply.
    Works up to 4 months in total absence of light.
    – electronic programmer;
    – solar panel;
    – built-in NOIRE EDGE FM400 receiver “433MHz”  ROLLING CODE;
    – one NOIRE pre-coded two-channel transmitter;
    – buffer batteries;

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    DOMOPARKE

    956,00 + TAX
  • EDGE2

    EDGE2 / EDGE 2 –  REMOTE CONTROLS  TRASMITTER 433,92 MHz

    EDGE2 / EDGE 2 –  REMOTE RADIO CONTROL  TRASMITTER 433,92 MHz
    EDGE 2E Portable transmitters 2 channels.
    2-channel portable versions with code transfer function between two remote controls.
    Black casing, bi-injection molded, with rubber top.
    To have the maximum sensitivity and make the radio control indestructible.
    Soft key ring supplied.

    Compatible with TANGO SLIM series receivers (Old series in face out)

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    EDGE2

    24,00 + TAX
  • EDGE20

    EDGE20 / EDGE 20 –  REMOTE RADIO CONTROL TRASMITTER 433,92 MHz

    EDGE 20 REMOTE RADIO CONTROL 433,92 MHz
    The EDGE20 remote radio control combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
    Multichannel remote control for fast and intuitive control of 20 functions of EDGE receivers.
    Innovative and refined container with a white LED display which, placed under the semi-transparent plastic.
    Displays the selected channel.
    In the center there is a rubberized keyboard with three function keys
    and two for channel up-down.

    Equipped with practical non-slip rubber pads.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • EDGE230R4

    EDGE230R4 / EDGE 230R4  RECEIVER 433,92 MHz

    EDGE230R4 / EDGE 230R4 RECEIVER
    The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
    The refined design, sober and essential assures the maximum ergonomic comfort.
    Edge range combines the simplicity of the fixed code to an excellent transmission range.
    Special functions: self learning codes and possibility to copy codes
    directly between transmitters.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    EDGE230R4

    89,00 + TAX

Main Menu