-
PRG304ETC
PRG304ETC – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG304ETC – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 650W.
ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS
Digital work time control. Command inputs: TA, TC and TB. Security inputs:
photocells, safety edge (N.C. contact or 8.2 kΩ), digital safety edge.
Output for a courtesy light 230Vac 300W and for a led warning light. The
appliance is supplied with a S449, 433MHz, FM decoder.
Suitable for the control of automatic rolling shutters.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€156,00 + TAXPRG304ETC
€156,00 + TAX -
PRG807001
PRG807001 – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG807001 – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 450W.
Digital work time control separately memorised for each gate leaf guided by a
6-digit display. Possible operation without mechanical travel limits. Torque setting.
Maximum power initial thrust control, torque limitation and deceleration
management with deceleration zone control. The appliance is fitted with an
interface for the insertion of a standard Cardin radio receiver card.
Suitable for the control of automatic gates and doors with two 230V motors.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€153,00 + TAXPRG807001
€153,00 + TAX -
CRL170 MOTOR FOR ROLLING SHUTTERS
CRL170 / CRL 170 – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
CRL170 / CRL 170 SHUTTERS – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
230V geared motor permitting a maximum lifting power of 180kg.
An electric lock must be fitted to guarantee that the rolling shutter
locks in the closed position.
Precise and reliable, thanks to the integrated travel limits, this model
may fitted to all types of rolling shutter with a 60mm or 48mm drive
shaft diameter and a crown wheel diameter of 200mm e 220mm.
Maximum rolling shutter height 6m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€150,00 + TAXCRL170 MOTOR FOR ROLLING SHUTTERS
€150,00 + TAX -
BSH95L16 CONDUCTIVE SAFETY EDGE 8,2kΩ
BSH95L16 – CONDUCTIVE SAFETY EDGE 8,2kΩ
BSH95L16 – 1.6-METER CONDUCTIVE SAFETY EDGE (PROFILE 95mm) – SAFETY DEVICES
BSH95L20 – 2.0-METER CONDUCTIVE SAFETY EDGE (PROFILE 95mm) – SAFETY DEVICES
BSH95L25 – 2.5-METER CONDUCTIVE SAFETY EDGE (PROFILE 95mm) – SAFETY DEVICES
BSH61L16 – 1.6-METER CONDUCTIVE SAFETY EDGE (PROFILE 61mm) – SAFETY DEVICES
BSH61L20 – 2.0-METER CONDUCTIVE SAFETY EDGE (PROFILE 61mm) – SAFETY DEVICES
BSH61L25 – 2.5-METER CONDUCTIVE SAFETY EDGE (PROFILE 61mm) – SAFETY DEVICES
CONDUCTIVE SAFETY EDGE – SAFETY DEVICES 8,2kΩ FOR SWING AND SLIDING GATES
High profile 95mm / low 61mm – contact 8,2kΩ with maximum detection speed 12 m/min – colour black
Conductive safety edge 8,2kΩ contact
The safety edges are used to eliminate the risk of crushing or shearing
caused by sliding doors, bulkheads, automatic gates etc. and respect the
requirements of the impact curve as stipulated in EN12453. The edges are
made up of a C-shaped aluminium support and a PVC profile in which a
safety sensor has been inserted. When the profile is deformed or crushed
the two metal contacts of the sensor come into contact causing the alarm
situation. The ample height of the rubber profile and the insert in conductive
rubber allow rapid intervention times fully respecting the standards and
regulations in force.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€86,00 – €134,00 + TAXBSH95L16 CONDUCTIVE SAFETY EDGE 8,2kΩ
€86,00 – €134,00 + TAX -
METALDEC230X – SELF-CALIBRATING METAL DETECTOR 230V
METALDEC230X – SELF-CALIBRATING METAL DETECTOR 230V
METALDEC230X – SELF-CALIBRATION METAL DETECTOR METALLIC MASS DETECTOR 230V MOUNTING ON DIN RAIL
Power supply:: 230Vac (50-60Hz) 35mA
Sensitivity: 8 levels
Relay output: 2 (max 1A 30V)
Operating temperature range: -20°…+55°C
Protection grade: IP40
Overall dimensions: 101 x 71 x 35.DOUBLE RELAY WITH SERIAL EXCHANGE NO-NC
SENSITIVITY SELECTOR H-M-L AND RESET BUTTON
UNDECAL CONNECTION FOR DIN RAIL GUIDE
RAIL GUIDE SOCKET DIN 46277
SENSITIVITY SELECTION DIP-SWITCHESIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€132,00 + TAXMETALDEC230X – SELF-CALIBRATING METAL DETECTOR 230V
€132,00 + TAX -
SAFEPRC4 – WIRELESS RADIO PHOTOCELLS
SAFECDR4 – PAIR OF WIRELESS PHOTOCELL RADIO PHOTOELECTRIC CELLS 433MHz
SAFECDR4 – PAIR OF WIRELESS PHOTOELECTRIC CELLS RADIO PHOTOCELLS 433MHz
3V lithium battery power supply.
Maximum radio signal range 30m.
Maximum infrared range 10m.
Transmitter and receiver housed in shockproof and waterproof cases IP65.
ROLLING CODE FM RADIO system. transmission frequency: 433MHz€129,00 + TAXSAFEPRC4 – WIRELESS RADIO PHOTOCELLS
€129,00 + TAX -
SAFEPRC8 – WIRELESS PHOTOCELLS
SAFECDR8 – PAIR OF WIRELESS PHOTOCELL RADIO PHOTOELECTRIC CELLS 868MHz
SAFECDR8 – PAIR OF WIRELESS PHOTOELECTRIC CELLS RADIO PHOTOCELL 868MHz
3V lithium battery power supply.
Maximum radio signal range 30m.
Maximum infrared range 10m.
Transmitter and receiver housed in shockproof and waterproof cases IP65.
ROLLING CODE FM RADIO system. transmission frequency: 868MHzIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€129,00 + TAXSAFEPRC8 – WIRELESS PHOTOCELLS
€129,00 + TAX -
SAFEKIT4 – KIT STATIONARY UNIT + SAFETY EDGE INTERFACE
SAFEKIT4 – KIT STATIONARY UNIT + SAFETY EDGE INTERFACE 433MHz
SAFEKIT4 – KIT SAFETY EDGE INTERFACE + STATIONARY TRANSCEIVER UNIT INTERFACE FOR SENSITIVE EDGE 433MHz
SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE
SAFEDECX4 – STATIONARY TRANSCEIVER UNIT
ROLLING CODE FM RADIO system. transmission frequency: 433MHz
SAFETY EDGE TRANSCEIVER INTERFACE
3V lithium battery power supply.
Safety edge signal input NC/8.2kΩ.
Maximum radio signal range 30m.
Shockproof case IP65.STATIONARY TRANSCEIVER UNIT
Power supply 12/24Vac-dc.
Maximum radio signal range 30m.
8 safety devices.
3 safety outputs NC/8.2kΩ.
Shockproof case IP65.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€126,00 + TAXSAFEKIT4 – KIT STATIONARY UNIT + SAFETY EDGE INTERFACE
€126,00 + TAX -
SAFEKIT8 – KIT STATIONARY UNIT + SAFETY EDGE INTERFACE
SAFEKIT8 – KIT STATIONARY UNIT + SAFETY EDGE INTERFACE
SAFEKIT8 – KIT SAFETY EDGE INTERFACE + STATIONARY TRANSCEIVER UNIT INTERFACE FOR SENSITIVE EDGE 868MHz
SAFEPRC8 – SAFETY EDGE TRANSCEIVER INTERFACE
SAFEDECX8 – STATIONARY TRANSCEIVER UNIT
SAFETY EDGE TRANSCEIVER INTERFACE
3V lithium battery power supply.
Safety edge signal input NC/8.2kΩ.
Maximum radio signal range 30m.
Shockproof case IP65.STATIONARY TRANSCEIVER UNIT
Power supply 12/24Vac-dc.
Maximum radio signal range 30m.
8 safety devices.
3 safety outputs NC/8.2kΩ.
Shockproof case IP65.
ROLLING CODE FM RADIO system. transmission frequency: 868MHzIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€126,00 + TAXSAFEKIT8 – KIT STATIONARY UNIT + SAFETY EDGE INTERFACE
€126,00 + TAX -
PRG304E
PRG304E – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG304E – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 650W.
ELECTRONIC CONTROL UNIT, BASIC VERSION
Digital work time control. Command inputs: TA, TC and TB. Security inputs:
photocells, safety edge (N.C. contact or 8.2 kΩ), digital safety edge.
Output for a courtesy light 230Vac 300W and for a led warning light. The
appliance is supplied with a S449, 433MHz, FM decoder.
Suitable for the control of automatic rolling shutters.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€121,00 + TAXPRG304E
€121,00 + TAX -
METALDEC024X – SELF-CALIBRATING METAL DETECTOR 24V
METALDEC024X – SELF-CALIBRATING METAL DETECTOR 24V
METALDEC024X – SELF-CALIBRATION METALLIC MASS DETECTOR 24V MOUNTING ON DIN RAIL
Power supply:: 24Vac-dc 100mA
Sensitivity: 8 levels
Relay output: 2 (max 1A 30V)
Operating temperature range: -20°…+55°C
Protection grade: IP40
Overall dimensions: 101 x 71 x 35.DOUBLE RELAY WITH SERIAL EXCHANGE NO-NC
SENSITIVITY SELECTOR H-M-L AND RESET BUTTON
UNDECAL CONNECTION FOR DIN RAIL GUIDE
RAIL GUIDE SOCKET DIN 46277
SENSITIVITY SELECTION DIP-SWITCHESIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€120,00 + TAXMETALDEC024X – SELF-CALIBRATING METAL DETECTOR 24V
€120,00 + TAX -
METALD3 – SELF-CALIBRATING METAL DETECTOR 24V
METALD3 – SELF-CALIBRATING METALLIC MASS DETECTOR 24V
METALD3 – SELF-CALIBRATION METAL DETECTOR OR METALLIC MASS DETECTOR 24V
Power supply:: 24Vac-dc 100mA
Sensitivity: 4 levels
Relay output: 3 (max 1A 30V)
Operating temperature range: -20°…+55°C
Protection grade: IP40
Overall dimensions: 146 x 64 x 38..DOUBLE RELAY WITH SERIAL EXCHANGE NO-NC
SENSITIVITY SELECTOR H-M-L AND RESET BUTTON
UNDECAL CONNECTION FOR DIN RAIL GUIDE
RAIL GUIDE SOCKET DIN 46277
SENSITIVITY SELECTION DIP-SWITCHESIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€114,00 + TAXMETALD3 – SELF-CALIBRATING METAL DETECTOR 24V
€114,00 + TAX