-
SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE
SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE 433MHz
SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE FOR SENSITIVE EDGE 433MHz
3V lithium battery power supply.
Safety edge signal input NC/8.2kΩ.
Maximum radio signal range 30m.
Shockproof case IP65.
ROLLING CODE FM RADIO system. transmission frequency: 433MHzIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€53,00 + TAXSAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE
€53,00 + TAX -
BSH95L16 CONDUCTIVE SAFETY EDGE 8,2kΩ
BSH95L16 – CONDUCTIVE SAFETY EDGE 8,2kΩ
BSH95L16 – 1.6-METER CONDUCTIVE SAFETY EDGE (PROFILE 95mm) – SAFETY DEVICES
BSH95L20 – 2.0-METER CONDUCTIVE SAFETY EDGE (PROFILE 95mm) – SAFETY DEVICES
BSH95L25 – 2.5-METER CONDUCTIVE SAFETY EDGE (PROFILE 95mm) – SAFETY DEVICES
BSH61L16 – 1.6-METER CONDUCTIVE SAFETY EDGE (PROFILE 61mm) – SAFETY DEVICES
BSH61L20 – 2.0-METER CONDUCTIVE SAFETY EDGE (PROFILE 61mm) – SAFETY DEVICES
BSH61L25 – 2.5-METER CONDUCTIVE SAFETY EDGE (PROFILE 61mm) – SAFETY DEVICES
CONDUCTIVE SAFETY EDGE – SAFETY DEVICES 8,2kΩ FOR SWING AND SLIDING GATES
High profile 95mm / low 61mm – contact 8,2kΩ with maximum detection speed 12 m/min – colour black
Conductive safety edge 8,2kΩ contact
The safety edges are used to eliminate the risk of crushing or shearing
caused by sliding doors, bulkheads, automatic gates etc. and respect the
requirements of the impact curve as stipulated in EN12453. The edges are
made up of a C-shaped aluminium support and a PVC profile in which a
safety sensor has been inserted. When the profile is deformed or crushed
the two metal contacts of the sensor come into contact causing the alarm
situation. The ample height of the rubber profile and the insert in conductive
rubber allow rapid intervention times fully respecting the standards and
regulations in force.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€86,00 – €134,00 + TAXBSH95L16 CONDUCTIVE SAFETY EDGE 8,2kΩ
€86,00 – €134,00 + TAX -
CP30BL – PASSIVE IMPACT EDGE
CP30BL – PASSIVE IMPACT EDGE
BP20BL – 2-METER PASSIVE IMPACT EDGE (PROFILE 70mm) – SAFETY DEVICES
CP30BL – 3-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
CP40BL – 4-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
CP50BL – 5-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
PASSIVE IMPACT EDGE – PASSIVE AUXILIARY DEVICES FOR SWING AND SLIDING GATES
High profile 70mm / low 30mm – colour black.
Low profile / high profile passive edge
Although it is not to be considered a safeties devices due to the absence of an electrical contact.
he passive edge has the same dimensions and mechanical protective characteristics as
the active safety edge and does supply valid absorption protection against impact. The
low profile edge, which works as simple impact protection, is suitable for closing
devices where passing room is limited.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€39,00 – €75,00 + TAXCP30BL – PASSIVE IMPACT EDGE
€39,00 – €75,00 + TAX -
BBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
BBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
BBASL07N – 0.7 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL10N – 1.0 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL12N – 1.2 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL18N – 1.8 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
MECHANICAL AUXILIARY DEVICES FOR SWING / SLIDING GATES
High profile 61mm – contact output N.C. – colour black.
Safety edge for garage doors N.C. contact
This mechanical device is an extremely versatile safety edge in aluminium that can be fitted to
overhead garage doors, rolling shutters and other industrial closing devices. The edges are fitted with
sealed micro-switches and have a series of accessories permitting a variety of combinations and uses.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€57,00 – €93,00 + TAXBBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
€57,00 – €93,00 + TAX -
NC8K2L16N – MECHANICAL EDGE CONTACT N.C.
NC8K2L16N – MECHANICAL EDGE CONTACT N.C.
NC8K2L16N – MECHANICAL EDGE N.C. CONTACT (L. 1,6m) – SAFETY DEVICE
NC8K2L20N – MECHANICAL EDGE N.C. CONTACT (L. 2.0m) – SAFETY DEVICE
NC8K2L25N – MECHANICAL EDGE N.C. CONTACT (L. 2,5m) – SAFETY DEVICE
NC8K2L30N – MECHANICAL EDGE N.C. CONTACT (L. 3.0m) – SAFETY DEVICEMECHANICAL SAFETY AUXILIARY DEVICES FOR SWING / SLIDING GATES
61mm high profile – N.C. contact output – black colour.Active mechanical safety edge with an N.C. contact for sliding gates / swing gates
The mechanical safety edge is used as a safety device in installations with automatic sliding gates with
horizontal movement and on other closing device installations (hinged gates etc.), where there is a real
risk of crushing or trapping.
Operation of the device is guaranteed by 2 micro-switches. Both of them intervene when the safety
edge and/or the pliable end caps are deformed.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€54,00 – €82,00 + TAXNC8K2L16N – MECHANICAL EDGE CONTACT N.C.
€54,00 – €82,00 + TAX -
DKSTP – KIT TRANSPONDER + INTERFACE
DKSTP – KIT TRANSPONDER + INTERFACE
DKSTP – KIT DISCONTINUED IN PHASE OUT
REPLACED BY THE KIT: DKSTPMDKSTP – TRANSPONDER + INTERFACE KIT consists of two products:
DKSTPT – TRANSPONDER READER
DKS1000R – 4CH INTERFACEDKSTPT – TRANSPONDER READER
Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).
DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
DKS1000 – KIT KEYPAD + ITERFACE 4CH
DKS1000 – KEYBOARD + INTERFACE KIT
DKS1000 – KEYBOARD + INTERFACE KIT consists of two products:
DKS1000T – BACKLIT KEYBOARD
DKS1000R – 4CH INTERFACEDKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters.
DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€106,00 + TAXDKS1000 – KIT KEYPAD + ITERFACE 4CH
€106,00 + TAX -
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER FUNCTION
The DKSDUALT – KEYPAD WITH TRANSPONDER is Surface-mounting IP57.
The DKSDUALT device has the following features:
– 12 keys with backlighting;
– backlighting controlled by the proximity sensor.
Allows the interface to be activated by either typing in a code or by proximity
reading an S500 transmitter, a TAG or a CARD.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€91,00 + TAXDKSDUALT – KEYPAD WITH TRANSPONDER
€91,00 + TAX -
DKSTPT – TRANSPONDER
DKSTPT – TRANSPONDER READER
DKSTPT – TRANSPONDER READER IS IN PHASE OUT
REPLACED WITH : DKSTPMT -TRASPONDER READER IN ZAMAK CASEDKSTPT – TRANSPONDER READER
The DKSTPT transponder reader is Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).€57,00 + TAXDKSTPT – TRANSPONDER
€57,00 + TAX -
DKS1000R – INTERFACE 4CH
DKS1000R – INTERFACE 4CH
DKS1000R 4-CHANNEL INTERFACE
The interface 4CH DKS1000R box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€37,00 + TAXDKS1000R – INTERFACE 4CH
€37,00 + TAX -
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters. It is suitable for connection with
the DKS security system via a shielded unipolar wire carrying both the power supply
and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
CARHF2 system (consult the Liberté catalogue).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€86,00 + TAXDKS1000T – KEYPAD WITH BACKLIGHTING
€86,00 + TAX -
INTBTC4 – BLUETOOTH INTERFACE
INTBTC4 – BLUETOOTH INTERFACE IN BOX (12 / 24Vac-dc).
INTBTC4 – BLUETOOTH INTERFACE WITH FOUR RELAYS
The interface with a Bluetooth module allows the control of four relays
with NO or NC contacts. The selection dip-switches (one block per
relay) allow you to select the relay’s activation method: impulsive, ON/
OFF, timer controlled or remotely controlled relay activation using the
programming calender in the Cardin multiprotocol interface Cardin
RCQ504/508W00. The programming buttons (one per relay) allow
you to set the activation times for the relays (from 1 s to 5 min) for
the timer controlled mode.
The Bluetooth module MODBT is to be ordered separately.
Power supply 12/24Vac-dc.
Electrical input 50mA.
Overall dimensions 95 x 75 x 25.
Indoor box IP20If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€60,00 + TAXINTBTC4 – BLUETOOTH INTERFACE
€60,00 + TAX