-
CDR973IX – PHOTOCELL
CDR973IX – PHOTOCELL WITH IP55 SHOCKPROOF CASE 15M RANGE
CDR973IX PHOTOCELL – PHOTOELECTRIC CELLS IN A SHOCKPROOF CASE IP55
Maximum range 15m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in a waterproof plastic case.
Self locking adjustable lens which can be rotated horizontally
through plus or minus 90° and vertically through plus or minus 30°
with respect to the standard installation position.
It is possible to connect up to 3 pairs of photocells and synchronize
the transmission (multiplex system).CDR973IX PHOTOCELL – FLUSH-FITTING PHOTOELECTRIC CELLS
The kit contains a pair of flush-fitting photoelectric cells and 2 lens
covers for flush-fitting photocells.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€67,00 + TAXCDR973IX – PHOTOCELL
€67,00 + TAX -
CDRREFLEX – REFLEX PHOTOCELL
CDRREFLEX / CDR REFLEX – PHOTOCELL
WITH SURFACE MOUNT CASE IP55
CDRREFLEX / CDR REFLEX – PHOTOCELL INFRARED BARRIERS PASSIVE REFLECTION PHOTOCELLS
WITH ADJUSTABLE OPTICS
CDRREFLEX / CDR REFLEX PHOTOELECTRIC PHOTOCELLS AND PASSIVE REFLECTION
POWER SUPPLY 12/24Vac-dc
Maximum range 10m.
Overall dimensions 50 x 90 x 60.
Shockproof container
Reflex photocell with IP55 degree of protection
Rotation range with respect to the standard position : ± 10°
Optic mounted on self-friction joints, adjustable both horizontally and vertically.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€68,00 + TAXCDRREFLEX – REFLEX PHOTOCELL
€68,00 + TAX -
CP30BL – PASSIVE IMPACT EDGE
CP30BL – PASSIVE IMPACT EDGE
BP20BL – 2-METER PASSIVE IMPACT EDGE (PROFILE 70mm) – SAFETY DEVICES
CP30BL – 3-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
CP40BL – 4-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
CP50BL – 5-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
PASSIVE IMPACT EDGE – PASSIVE AUXILIARY DEVICES FOR SWING AND SLIDING GATES
High profile 70mm / low 30mm – colour black.
Low profile / high profile passive edge
Although it is not to be considered a safeties devices due to the absence of an electrical contact.
he passive edge has the same dimensions and mechanical protective characteristics as
the active safety edge and does supply valid absorption protection against impact. The
low profile edge, which works as simple impact protection, is suitable for closing
devices where passing room is limited.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€39,00 – €75,00 + TAXCP30BL – PASSIVE IMPACT EDGE
€39,00 – €75,00 + TAX -
CRL170 MOTOR FOR ROLLING SHUTTERS
CRL170 / CRL 170 – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
CRL170 / CRL 170 SHUTTERS – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
230V geared motor permitting a maximum lifting power of 180kg.
An electric lock must be fitted to guarantee that the rolling shutter
locks in the closed position.
Precise and reliable, thanks to the integrated travel limits, this model
may fitted to all types of rolling shutter with a 60mm or 48mm drive
shaft diameter and a crown wheel diameter of 200mm e 220mm.
Maximum rolling shutter height 6m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€150,00 + TAXCRL170 MOTOR FOR ROLLING SHUTTERS
€150,00 + TAX -
CRL170E MOTOR FOR ROLLING SHUTTERS
CRL170E / CRL 170E – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
CRL170E / CRL 170E SHUTTERS – SELF-LOCKING GEARED MOTOR FOR ROLLING SHUTTERS
230V geared motor permitting a maximum lifting power of 180kg.
Precise and reliable, thanks to the integrated travel limits and
standard electromagnetic lock, this model may fitted to all types of
rolling shutter with a 60mm or 48mm drive shaft diameter and a
crown wheel diameter of 200mm e 220mm.
Maximum rolling shutter height 6m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€207,00 + TAXCRL170E MOTOR FOR ROLLING SHUTTERS
€207,00 + TAX -
CRL180E MOTOR FOR ROLLING SHUTTERS
CRL180E / CRL 180E – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
CRL180E / CRL 180E SHUTTERS – SELF-LOCKING GEARED MOTOR FOR ROLLING SHUTTER
230V geared motor permitting a maximum lifting power of 180kg.
Precise and reliable, thanks to the integrated travel limits and
standard electromagnetic lock, this model may fitted to all types of
rolling shutter with a 76mm drive shaft diameter and a crown wheel
diameter of 240mm.
Maximum rolling shutter height 6m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€249,00 + TAXCRL180E MOTOR FOR ROLLING SHUTTERS
€249,00 + TAX -
CRL360DE DUBLE MOTOR FOR ROLLING SHUTTERS
CRL360DE / CRL 360DE– REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
CRL360DE / CRL 360DE SHUTTERS – DUBLE SELF-LOCKING GEARED MOTOR FOR ROLLING SHUTTER AND GARAGE DOORS
Two 230V geared motors permitting a maximum lifting power of 360kg.
Precise and reliable, thanks to the integrated travel limits and
standard electromagnetic lock, this model may fitted to all types of
rolling shutter with a 76mm drive shaft diameter and a crown wheel
diameter of 240mm.
Maximum rolling shutter height 6m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€299,00 + TAXCRL360DE DUBLE MOTOR FOR ROLLING SHUTTERS
€299,00 + TAX -
DKS1000 – KIT KEYPAD + ITERFACE 4CH
DKS1000 – KEYBOARD + INTERFACE KIT
DKS1000 – KEYBOARD + INTERFACE KIT consists of two products:
DKS1000T – BACKLIT KEYBOARD
DKS1000R – 4CH INTERFACEDKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters.
DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€106,00 + TAXDKS1000 – KIT KEYPAD + ITERFACE 4CH
€106,00 + TAX -
DKS1000R – INTERFACE 4CH
DKS1000R – INTERFACE 4CH
DKS1000R 4-CHANNEL INTERFACE
The interface 4CH DKS1000R box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€37,00 + TAXDKS1000R – INTERFACE 4CH
€37,00 + TAX -
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters. It is suitable for connection with
the DKS security system via a shielded unipolar wire carrying both the power supply
and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
CARHF2 system (consult the Liberté catalogue).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€86,00 + TAXDKS1000T – KEYPAD WITH BACKLIGHTING
€86,00 + TAX -
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER FUNCTION
The DKSDUALT – KEYPAD WITH TRANSPONDER is Surface-mounting IP57.
The DKSDUALT device has the following features:
– 12 keys with backlighting;
– backlighting controlled by the proximity sensor.
Allows the interface to be activated by either typing in a code or by proximity
reading an S500 transmitter, a TAG or a CARD.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€91,00 + TAXDKSDUALT – KEYPAD WITH TRANSPONDER
€91,00 + TAX -
DKSTP – KIT TRANSPONDER + INTERFACE
DKSTP – KIT TRANSPONDER + INTERFACE
DKSTP – KIT DISCONTINUED IN PHASE OUT
REPLACED BY THE KIT: DKSTPMDKSTP – TRANSPONDER + INTERFACE KIT consists of two products:
DKSTPT – TRANSPONDER READER
DKS1000R – 4CH INTERFACEDKSTPT – TRANSPONDER READER
Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).
DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount