-
SLX824CB
SLX824CB / SLX824 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX824CB AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 800KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX824CB motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger (SLX824CB – SLX1524CB);
– NiMH batteries (SLX824CB – SLX1524CB);The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€600,00 + TAXSLX824CB
€600,00 + TAX -
BL824MCB
BL824MCB MASTER- ELECTROMECHANICAL GROUP WITH 24V MOTOR
BL824-MCB – MOTOR IS IN PHASE OUT
REPLASED WITH MOTOR : BLGRIFFE24M
BL824MCB MOTOR – SELF-LOCKING GROUP MASTER WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES FOR SWING GATE WITH HINGED ARM
BL824MCB MOTOR MASTER Encoder-controlled self-locking Master unit including:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.
Particularly suited for installations with narrow columns that require
the mounting base to be less than 150mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with a hinged
arm and an electric lock) 200kg maximum weight.
Manual release is carried out using the hexagonal key located inside
the side panel.
Operator arm to be ordered separately.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€582,00 + TAXBL824MCB
€582,00 + TAX -
KT-SLX624CB KIT
KT-SLX624CB – KIT IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES 24V
KT-SLX624CB – KIT COMPLETE IRREVERSIBLE MOTOR GEARMOTOR 24V FOR SLIDING GATES 600Kg
KT-SLX624CB / KT-SLX624 CB -GEARMOTOR MOTOR 24V FOR SLIDING GATES UP TO 600Kg
Electromechanical gearmotor ideal for residential sliding gates.
Complete with encoder, magnetic limits and advanced built-in control unit.The automation KT-SLX624CB 24V motor is made up of self-locking gearmotor controlled by
encoder and magnetic travel limits with an in-built:
– electronic programmer;
– motor speed regulation;
– motor drive power regulation;
– double 8,2kΩ inputs for connecting safety edges;
– slot-in open collector receiver card.The programmer of KT-SLX624CB allows you to rapidly set the system parameters
including: the sequential button mode, automatic reclosing, warning
lamp pre-flashing, flashing warning lamp activation, indicator light and
photoelectric cell function setting etc.KT-SLX624CB USING
The kit contains all the command, control and safety devices required
to carry out a residential installation for medium to small size sliding
gates with a maximum weight of 600kg.
SLX624CB 24V is Ideal for residential sliding gates up to 600kg.
The appliance is fitted with a safe and secure key-operated manual
release system protected by a plastic access door.KT-SLX624CB KIT COMPLETE
SX624CB : SELF-LOCKING SLIDING GATE MOTOR
with an encoder-controlled 24Vdc motor and magnetic travel limits.
In-built electronic programmer.
N. 1 RSQ504OC2 : 2-CHANNEL RECEIVER CARD
433MHz open collector, slot-in card. S508 – S449 – S486 – FM – EDGE and
NOIRE versions are available on request.
N. 2 TXQ504C4 : 4-CHANNEL TRANSMITTERS
433MHz FM ROLLING CODE.
N. 1 CDR999 : PAIR OF SURFACE-MOUNT PHOTOELECTRIC CELLS
with adjustable lens, range 10m.
N. 1 ICON : LED WARNING LIGHT
24V – 230V with an in-built aerial
N. 1 TARGA-INT : INTERNATIONAL WARNING SIGN
in PP, multi-language.€545,00 + TAXKT-SLX624CB KIT
€545,00 + TAX -
KT-SL524CBX KIT
KT-SL524CBX – KIT IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES 24V
KT-SL524CBX – KIT COMPLETE IRREVERSIBLE MOTOR GEARMOTOR 24V FOR SLIDING GATES 500Kg
SL524CB / SL524 CB -GEARMOTOR MOTOR 24V FOR SLIDING GATES UP TO 500Kg
Electromechanical gearmotor ideal for residential sliding gates.
Complete with encoder, magnetic limits and advanced built-in control unit.The automation KT-SL524CBX 24V motor is made up of self-locking gearmotor controlled by
encoder and magnetic travel limits with an in-built:
– electronic programmer;
– motor speed regulation;
– motor drive power regulation;
– double 8,2kΩ inputs for connecting safety edges;
– slot-in open collector receiver card.The programmer of KT SL524CBX allows you to rapidly set the system parameters
including: the sequential button mode, automatic reclosing, warning
lamp pre-flashing, flashing warning lamp activation, indicator light and
photoelectric cell function setting etc.KT SL524CBX USING
The kit contains all the command, control and safety devices required
to carry out a residential installation for medium to small size sliding
gates with a maximum weight of 500kg.
SL524CB 24V is Ideal for residential sliding gates up to 500kg.
The appliance is fitted with a safe and secure key-operated manual
release system protected by a plastic access door.KT-SL524CBX KIT COMPLETE
SL524CB : SELF-LOCKING SLIDING GATE MOTOR
with an encoder-controlled 24Vdc motor and magnetic travel limits.
In-built electronic programmer.RSQ504OC2 : 2-CHANNEL RECEIVER CARD
433MHz open collector, slot-in card. S508 – S449 – S486 – FM – EDGE and
NOIRE versions are available on request.TXQ504C4 : 4-CHANNEL TRANSMITTERS
433MHz FM ROLLING CODE.CDR999 : PAIR OF SURFACE-MOUNT PHOTOELECTRIC CELLS
with adjustable lens, range 10m.ICON : LED WARNING LIGHT
24V – 230V with an in-built aerialTARGA-INT : INTERNATIONAL WARNING SIGN
in PP, multi-language.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€535,00 + TAXKT-SL524CBX KIT
€535,00 + TAX -
SLX824
SLX824 / SLX 824 – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX824 AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 800KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX824 motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.€528,00 + TAXSLX824
€528,00 + TAX -
SLX624CB MOTOR
SLX824CB / SLX824 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX824CB AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 800KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX824CB motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger (SLX824CB – SLX1524CB);
– NiMH batteries (SLX824CB – SLX1524CB);
– reversible motor (SLX1024REV).The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€492,00 + TAXSLX624CB MOTOR
€492,00 + TAX -
KT-SLX624 KIT
KT-SLX624 – KIT IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES 24V
KT-SLX624 – KIT COMPLETE IRREVERSIBLE MOTOR GEARMOTOR 24V FOR SLIDING GATES 600Kg
KT-SLX624 -GEARMOTOR MOTOR 24V FOR SLIDING GATES UP TO 600Kg
Electromechanical gearmotor ideal for residential sliding gates.
Complete with encoder, magnetic limits and advanced built-in control unit.The automation KT-SLX624 24V motor is made up of self-locking gearmotor controlled by
encoder and magnetic travel limits with an in-built:
– electronic programmer;
– motor speed regulation;
– motor drive power regulation;
– double 8,2kΩ inputs for connecting safety edges;
– slot-in open collector receiver card.The programmer of KT-SLX624CB allows you to rapidly set the system parameters
including: the sequential button mode, automatic reclosing, warning
lamp pre-flashing, flashing warning lamp activation, indicator light and
photoelectric cell function setting etc.KT-SLX624 USING
The kit contains all the command, control and safety devices required
to carry out a residential installation for medium to small size sliding
gates with a maximum weight of 600kg.
SLX624CB 24V is Ideal for residential sliding gates up to 600kg.
The appliance is fitted with a safe and secure key-operated manual
release system protected by a plastic access door.KT-SLX624 KIT COMPLETE
SX624 : SELF-LOCKING SLIDING GATE MOTOR
with an encoder-controlled 24Vdc motor and magnetic travel limits.
In-built electronic programmer.
N. 1 2-CHANNEL RECEIVER CARD
433MHz open collector, slot-in card. S508 – S449 – S486 – FM – EDGE and
N. 2 TXQ504C4 : 4-CHANNEL TRANSMITTERS
433MHz FM ROLLING CODE.
N. 1 CDR999 : PAIR OF SURFACE-MOUNT PHOTOELECTRIC CELLS
with adjustable lens, range 10m.
N. 1 ICON : LED WARNING LIGHT
24V – 230V with an in-built aerial
N. 1 TARGA-INT : INTERNATIONAL WARNING SIGN
in PP, multi-language.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€485,00 + TAXKT-SLX624 KIT
€485,00 + TAX -
SL524CB
SL524CB / SL524 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SL524CB AUTOMATION – FAST SELF-LOCKING UNIT ENCODER 24V MAX. 500KG + NIMH BATTERIES FOR SLIDING GATE
The SL524CB automation is made up of a self-locking gear motor controlled
by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.The electronic programmer of SL524CB automation system is factory fitted with a graphic LCD
display (16 digits x 2 lines) in six different languages that monitors
the programming stages, counts and displays the number of
manoeuvres carried out by the machine.It allows you to rapidly set the system parameters including: the sequential button mode,
automatic reclosing, warning lamp pre-flashing, flashing warning
lamp activation, indicator light and photoelectric cell function setting
and transmitter code management etc.
The appliance is fitted with a safe and secure manual release system
with a personalised knob (supplied with the appliance).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€480,00 + TAXSL524CB
€480,00 + TAX -
GLMECHA24M MOTOR
GLMECHA24M / GLMECHA 24M – MASTER SELF-LOCKING SWINGING GARAGE DOOR MOTOR 24V
GLMECHA24M / GLMECHA 24M – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD GARAGE DOORS 24V
Electromechanical gearmotor 24V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.GLMECHA24M / GLMECHA 24M – SELF-LOCKING GARAGE DOOR MOTOR
SELF-PROGRAMMING ELECTROMECHANICAL UNIT WITH A 24V MOTOR (433MHz)
Self-locking encoder-controlled Master automation with an in-built
electronic programmer.
Operator arms are to be ordered separately.
Kit battery charger + batteries to be ordered separately.
with a 230V slave motor for garage doors 2,5 m and 8 m2 .If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€459,00 + TAXGLMECHA24M MOTOR
€459,00 + TAX -
GLMECHA230M MOTOR
GLMECHA230M / GLMECHA 230M – MASTER SELF-LOCKING SWINGING GARAGE DOOR MOTOR 230V
GLMECHA230M / GLMECHA 230M – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD GARAGE DOORS 230V
Electromechanical gearmotor 230 V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.GLMECHA230M / GLMECHA 230M – SELF-LOCKING GARAGE DOOR MOTOR
SELF-PROGRAMMING ELECTROMECHANICAL UNIT WITH A 230V MOTOR (433MHz)
Self-locking encoder-controlled Master automation with an in-built
electronic programmer.
Operator arms are to be ordered separately.
Kit battery charger + batteries to be ordered separately.
with a 230V slave motor for garage doors 2,5 m and 8 m2 .If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€449,00 + TAXGLMECHA230M MOTOR
€449,00 + TAX -
BLi1000 INSIDE
BLi1000 INSIDE- SELF-LOCKING ACTUATOR INSIDE 24v
BLi1000 INSIDE – INSIDE MOTOR SELF-LOCKING GROUP WITH ENCODER 24V MAX. 200KG
INTEGRABLE ELECTROMECHANICAL ACTUATOR:
– 24V MOTOR
– FOR GATES MAX 200Kg
– DOOR LENGTH 2,5M
– WITH MAX OPENING. 180 °
Self-locking actuator controlled by encoder.
INSIDE motor: Can be integrated into swing gatesThe automation KT-BLi1000 inside motor is encoder controlled by an external ECU factory fitted
with a graphic LCD display (128 x 128 pixels) with backlighting in six
different languages. The geared motors are connected to the electronics
card by means of a six-wire, fast-fitting cable.CC242EFAMCB : ELECTRONIC PROGRAMMER FOR TWO MOTORS
including:
– 433MHz FM receiver;
– multi-decoding module S449-S486-S504-S508;
– battery charger and NiMH batteries.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€428,00 + TAXBLi1000 INSIDE
€428,00 + TAX -
SLX624 MOTOR
SLX824CB / SLX824 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX824CB AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 800KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX824CB motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger (SLX824CB – SLX1524CB);
– NiMH batteries (SLX824CB – SLX1524CB);
– reversible motor (SLX1024REV).The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€426,00 + TAXSLX624 MOTOR
€426,00 + TAX