Equipment of the professional line
They are devices equipped with additional functions
-
PRG807001
PRG807001 – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG807001 – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 450W.
Digital work time control separately memorised for each gate leaf guided by a
6-digit display. Possible operation without mechanical travel limits. Torque setting.
Maximum power initial thrust control, torque limitation and deceleration
management with deceleration zone control. The appliance is fitted with an
interface for the insertion of a standard Cardin radio receiver card.
Suitable for the control of automatic gates and doors with two 230V motors.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€153,00 + TAXPRG807001
€153,00 + TAX -
HL2524ESB
HL2524ESB – UNDERGROUND ELECTROMECHANICAL MOTOR 24V
HL2524ESB – SELF-LOCKING UNDERGROUND MOTOR WITH ENCODER 24V
SWING GATES MAX WEIGHT. 350KGHL2524ESB – SELF-LOCKING MOTOR IN PHASE OUT
REPLACED BY NEW MOTOR : HLXCORE24 MOTORELECTROMECHANICAL OPERATOR HL1824ESB
– 24V MOTOR FOR GATES
– 110° MAXIMUM OPENING ANGLE
– GATE MAX 3M
– GATE MAX 5050KG
Self-locking operator:
– fitted with a crank rod transmission system;
– supplied with a 6m connection cable;
– embedding case and Cardin electronic programmer to be ordered separately.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
CDR852A – PHOTOCELL
CDR852A – PHOTOCELL WITH SURFACE CONTAINER SHOCKPROOF IP66 RANGE 60M
CDR852A PHOTOCELL – PHOTOELECTRIC CELLS IN AN ALUMINIUM CASE IP66
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP66
Transmitter and receiver housed in a compact waterproof aluminium
case. Highly resistant spray painting.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR852A).CDR852A PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE 60m
The kit contains a pair of photoelectric cells with two pipe glands.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€103,00 + TAXCDR852A – PHOTOCELL
€103,00 + TAX -
HLXCORE230 UNDERGROUND MOTOR
HLXCORE230 / HLXCORE 230 – UNDERGROUND ELECTROMECHANICAL MOTOR 230V
HLXCORE230 / HLXCORE 230 – SELF-LOCKING UNDERGROUND MOTOR WITH ENCODER 230V
SWING GATES MAX WEIGHT. 550KG
ELECTROMECHANICAL OPERATOR HLXCORE230
– 230V MOTOR FOR GATES
– 110° MAXIMUM OPENING ANGLE
– GATE MAX 3M
– GATE MAX 550KG
Self-locking operator:
– fitted with a crank rod transmission system;
– supplied with a 6m connection cable;
– embedding case and Cardin electronic programmer to be ordered separately.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€345,00 + TAXHLXCORE230 UNDERGROUND MOTOR
€345,00 + TAX -
HLBOX
HLBOX : HOT-GALVANIZED FOUNDATION GEAR MOTOR IN CATAPHORESIS + SBLSHL RELEASE WITH LEVER
HLBOX Foundation box or HEMBEDDED CASE for underground electromechanical gearmotor 24 V 230 V ideal for swing gates up to 3 meters.
Equipped with encoder and easy release.
Safe thanks to the precision and sensitivity of the encoder and to the slowdowns in opening and closing.
Practical thanks to the control unit with quick connection and self-learning receiver.
Adjustable limit switches integrated in the case.
Reliable with perfect watertightness and solid and robust mechanics.HLBOX EMBEDDED CASE
Complete with connection lever and adjustable mechanical travel limits.
Foundation box in hot-dip galvanized cataphoresis complete with connection
levers and mechanical stops adjustable in opening and closing.+ SBLSHL Release with lever for HLBOX or HLBOXI foundation boxes
All versions are fitted with a stainless steel cover.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€189,00 + TAXHLBOX
€189,00 + TAX -
PRG383TCE
PRG383TCE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR
PRG383TCE – CONTROL UNIT IN PHASE OUT
REPLACED BY PRG400TEPRG383TCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 230V 400V.
INDUSTRIAL PROGRAMMER CONTROLLING ONE SINGLE PHASE / THREE PHASE MOTOR
ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS
– 370W single phase power supply 230Vac,
– 700W three phase power supply 400Vac.Automatic, semiautomatic, manual and remote control functions.
Command inputs TA, TB, TC, TD, TAL.
Incorporated door security switch.
Optional external control buttons.
Electric brake output.
Interface for a standard slot-in radio receiver card.
Supplied with 4 x Ø16mm cable glands.
The control unit is supplied with 4 x Ø16mm cable glands.
The PRG383TCE control unit is Suitable for the control of industrial gates and doors with one three phase motor.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
HL251CL
HL251CL – UNDERGROUND ELECTROMECHANICAL MOTOR 230V
HL251CL – SELF-LOCKING UNDERGROUND MOTOR WITH ENCODER 230V
SWING GATES MAX WEIGHT. 550KG
HL251CL – SELF-LOCKING MOTOR IN PHASE OUT
REPLACED BY NEW MODEL : HLXCORE230 MOTORELECTROMECHANICAL OPERATOR HL251CL
– 230V MOTOR FOR GATES
– 110° MAXIMUM OPENING ANGLE
– GATE MAX 3M
– GATE MAX 5050KG
Self-locking operator:
– fitted with a crank rod transmission system;
– supplied with a 6m connection cable;
– embedding case and Cardin electronic programmer to be ordered separately.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
FTR893C3 – MINI PHOTOCELL
FTR893C3 / FTR 893C3 – MINI PHOTOCELL
WITH SURFACE MOUNT CASE IP55
FTR 893C3 / FTR893C3 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
FTR893C3 / FTR 893C3 DOUBLE-RELAY PHOTOELECTRIC PHOTOCELLS
Power supply 12/24Vac-dc.
Range: 2,5m indoors.
Transmitter cable 4 metres – Receiver cable 4 metres.SINGLE-BEAM INFRARED BARRIER PHOTOELECTRIC PHOTOCELLS
Overall dimensions 90 x 50 x 20.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€46,00 + TAXFTR893C3 – MINI PHOTOCELL
€46,00 + TAX -
HLBOXC
HLBOXC : HOT-GALVANIZED FOUNDATION GEAR MOTOR IN CATAPHORESIS + SBLSHL RELEASE WITH LEVER
HLBOXC Foundation box or HEMBEDDED CASE for underground electromechanical gearmotor 24 V 230 V ideal for swing gates up to 3 meters.
Equipped with encoder and easy release.
Safe thanks to the precision and sensitivity of the encoder and to the slowdowns in opening and closing.
Practical thanks to the control unit with quick connection and self-learning receiver.
Adjustable limit switches integrated in the case.
Reliable with perfect watertightness and solid and robust mechanics.HLBOXC EMBEDDED CASE
Complete with connection lever and adjustable mechanical travel limits.
Foundation box in hot-dip galvanized cataphoresis complete with connection
levers and mechanical stops adjustable in opening and closing.+ SBLSHL Release with lever for HLBOX or HLBOXI foundation boxes
All versions are fitted with a stainless steel cover.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€211,00 + TAXHLBOXC
€211,00 + TAX -
PRG900CB
PRG900CB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
PRG900CB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS + charger and NiMH batteries
Electronic PRG900CB control unit programmer for the control of 24Vdc hinged gates with
intelligent time control functions that allow you to control the position of
the hinged and sliding gates, .The PRG900CB control uniti fitted with a multi-decoding module S449
– S486 – S504 – S508. Gate travel time programming is fully automatic
and guided by a 6-digit display which allows you to visualise the number
of manoeuvres carried out and to set several parameters such as the
type of motor, the torque setting and the limited opening distance.Dip-switches allow you to set the system parameters including: the
sequential button mode, automatic reclosing, warning lamp pre-flashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting and electric lock enable.PRG900CB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
PRG900CB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS + charger and NiMH batteries
Electronic PRG900CB control unit programmer for the control of 24Vdc hinged gates with
intelligent time control functions that allow you to control the position of
the hinged and sliding gates, .The PRG900CB control uniti fitted with a multi-decoding module S449
– S486 – S504 – S508. Gate travel time programming is fully automatic
and guided by a 6-digit display which allows you to visualise the number
of manoeuvres carried out and to set several parameters such as the
type of motor, the torque setting and the limited opening distance.Dip-switches allow you to set the system parameters including: the
sequential button mode, automatic reclosing, warning lamp pre-flashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting and electric lock enable.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€283,00 + TAXPRG900CB
€283,00 + TAX -
PRG3830CE
PRG3830CE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR
PRG3830CE – CONTROL UNIT IN PHASE OUT
REPLACED BY PRG400TEPRG383OCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 230V 400V.
INDUSTRIAL PROGRAMMER CONTROLLING ONE SINGLE PHASE / THREE PHASE MOTOR
ELECTRONIC CONTROL UNIT, BASIC VERSION
– 370W single phase power supply 230Vac,
– 700W three phase power supply 400Vac.Automatic, semiautomatic, manual and remote control functions.
Command inputs TA, TB, TC, TD, TAL.
Incorporated door security switch.
Optional external control buttons.
Electric brake output.
Interface for a standard slot-in radio receiver card.
Supplied with 4 x Ø16mm cable glands.
The control unit is supplied with 4 x Ø16mm cable glands.
The PRG383OCE control unit is Suitable for the control of industrial gates and doors with one three phase motor.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
TXQ504C2
TXQ504C2 – 2-FUNCTION PRECODED TRANSMITTER (433MHz)
TXQ504C2 – QUARTZ TRANSMITTER DIGITAL REMOTE RADIO CONTROL WITH ROLLING CODES
2-function pre-coded remote control radio transmitter (433MHz)
TXQ504C2 – PRECODED TRANSMITTER – REMOTE RADIO CONTROL OR RADIO CONTROL
The TXQ504C2 transmitter container in shockproof plastic material.
3V lithium battery power supply CR2032.
Overall dimensions 35 x 80 x 11.
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€23,00€28,00+ TAXTXQ504C2
€23,00€28,00+ TAX
