-
BBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
BBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
BBASL07N – 0.7 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL10N – 1.0 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL12N – 1.2 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL18N – 1.8 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
MECHANICAL AUXILIARY DEVICES FOR SWING / SLIDING GATES
High profile 61mm – contact output N.C. – colour black.
Safety edge for garage doors N.C. contact
This mechanical device is an extremely versatile safety edge in aluminium that can be fitted to
overhead garage doors, rolling shutters and other industrial closing devices. The edges are fitted with
sealed micro-switches and have a series of accessories permitting a variety of combinations and uses.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€57,00 – €93,00 + TAXBBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
€57,00 – €93,00 + TAX -
NC8K2L16N – MECHANICAL EDGE CONTACT N.C.
NC8K2L16N – MECHANICAL EDGE CONTACT N.C.
NC8K2L16N – MECHANICAL EDGE N.C. CONTACT (L. 1,6m) – SAFETY DEVICE
NC8K2L20N – MECHANICAL EDGE N.C. CONTACT (L. 2.0m) – SAFETY DEVICE
NC8K2L25N – MECHANICAL EDGE N.C. CONTACT (L. 2,5m) – SAFETY DEVICE
NC8K2L30N – MECHANICAL EDGE N.C. CONTACT (L. 3.0m) – SAFETY DEVICEMECHANICAL SAFETY AUXILIARY DEVICES FOR SWING / SLIDING GATES
61mm high profile – N.C. contact output – black colour.Active mechanical safety edge with an N.C. contact for sliding gates / swing gates
The mechanical safety edge is used as a safety device in installations with automatic sliding gates with
horizontal movement and on other closing device installations (hinged gates etc.), where there is a real
risk of crushing or trapping.
Operation of the device is guaranteed by 2 micro-switches. Both of them intervene when the safety
edge and/or the pliable end caps are deformed.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€54,00 – €82,00 + TAXNC8K2L16N – MECHANICAL EDGE CONTACT N.C.
€54,00 – €82,00 + TAX -
DKSTP – KIT TRANSPONDER + INTERFACE
DKSTP – KIT TRANSPONDER + INTERFACE
DKSTP – KIT DISCONTINUED IN PHASE OUT
REPLACED BY THE KIT: DKSTPMDKSTP – TRANSPONDER + INTERFACE KIT consists of two products:
DKSTPT – TRANSPONDER READER
DKS1000R – 4CH INTERFACEDKSTPT – TRANSPONDER READER
Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).
DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
DKS1000 – KIT KEYPAD + ITERFACE 4CH
DKS1000 – KEYBOARD + INTERFACE KIT
DKS1000 – KEYBOARD + INTERFACE KIT consists of two products:
DKS1000T – BACKLIT KEYBOARD
DKS1000R – 4CH INTERFACEDKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters.
DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€106,00 + TAXDKS1000 – KIT KEYPAD + ITERFACE 4CH
€106,00 + TAX -
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER FUNCTION
The DKSDUALT – KEYPAD WITH TRANSPONDER is Surface-mounting IP57.
The DKSDUALT device has the following features:
– 12 keys with backlighting;
– backlighting controlled by the proximity sensor.
Allows the interface to be activated by either typing in a code or by proximity
reading an S500 transmitter, a TAG or a CARD.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€91,00 + TAXDKSDUALT – KEYPAD WITH TRANSPONDER
€91,00 + TAX -
DKSTPT – TRANSPONDER
DKSTPT – TRANSPONDER READER
DKSTPT – TRANSPONDER READER IS IN PHASE OUT
REPLACED WITH : DKSTPMT -TRASPONDER READER IN ZAMAK CASEDKSTPT – TRANSPONDER READER
The DKSTPT transponder reader is Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).€57,00 + TAXDKSTPT – TRANSPONDER
€57,00 + TAX -
DKS1000R – INTERFACE 4CH
DKS1000R – INTERFACE 4CH
DKS1000R 4-CHANNEL INTERFACE
The interface 4CH DKS1000R box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€37,00 + TAXDKS1000R – INTERFACE 4CH
€37,00 + TAX -
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters. It is suitable for connection with
the DKS security system via a shielded unipolar wire carrying both the power supply
and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
CARHF2 system (consult the Liberté catalogue).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€86,00 + TAXDKS1000T – KEYPAD WITH BACKLIGHTING
€86,00 + TAX -
CRL170 MOTOR FOR ROLLING SHUTTERS
CRL170 / CRL 170 – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
CRL170 / CRL 170 SHUTTERS – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
230V geared motor permitting a maximum lifting power of 180kg.
An electric lock must be fitted to guarantee that the rolling shutter
locks in the closed position.
Precise and reliable, thanks to the integrated travel limits, this model
may fitted to all types of rolling shutter with a 60mm or 48mm drive
shaft diameter and a crown wheel diameter of 200mm e 220mm.
Maximum rolling shutter height 6m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€150,00 + TAXCRL170 MOTOR FOR ROLLING SHUTTERS
€150,00 + TAX -
ICONX WARNING FLASHING LIGHT
ICONX – 24-230V LED FLASHING LIGHT WITH ANTENNA
ICONX – LED FLASHING LIGHT 24V – 230V WARNING LIGHT WITH ANTENNA
Special version with acoustic signal of the moving leaf e transparent cap
that allows the luminous visualization of the LEDs
RGB (orange, red, green, purple, white) with Cardin Pro control units.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€54,00 + TAXICONX WARNING FLASHING LIGHT
€54,00 + TAX -
CDRREFLEX – REFLEX PHOTOCELL
CDRREFLEX / CDR REFLEX – PHOTOCELL
WITH SURFACE MOUNT CASE IP55
CDRREFLEX / CDR REFLEX – PHOTOCELL INFRARED BARRIERS PASSIVE REFLECTION PHOTOCELLS
WITH ADJUSTABLE OPTICS
CDRREFLEX / CDR REFLEX PHOTOELECTRIC PHOTOCELLS AND PASSIVE REFLECTION
POWER SUPPLY 12/24Vac-dc
Maximum range 10m.
Overall dimensions 50 x 90 x 60.
Shockproof container
Reflex photocell with IP55 degree of protection
Rotation range with respect to the standard position : ± 10°
Optic mounted on self-friction joints, adjustable both horizontally and vertically.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€68,00 + TAXCDRREFLEX – REFLEX PHOTOCELL
€68,00 + TAX -
CDR893 – MINI PHOTOCELL
CDR893 / CDR 893 – MINI PHOTOCELL
WITH SURFACE MOUNT CASE IP55
CDR 893 / CDR893 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
CDR893 / CDR 893 SINGLE-RELAY PHOTOELECTRIC PHOTOCELLS
Power supply 10…24Vac-dc.
Range: 4m indoors – 2m outdoors.
Transmitter cable 3 metres – Receiver cable 3 metres.SINGLE-BEAM INFRARED BARRIER PHOTOELECTRIC PHOTOCELLS
with a socket for mounting on a rail guide DIN46277.
Overall dimensions 60 x 45 x 117.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount