-
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER FUNCTION
The DKSDUALT – KEYPAD WITH TRANSPONDER is Surface-mounting IP57.
The DKSDUALT device has the following features:
– 12 keys with backlighting;
– backlighting controlled by the proximity sensor.
Allows the interface to be activated by either typing in a code or by proximity
reading an S500 transmitter, a TAG or a CARD.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€91,00 + TAXDKSDUALT – KEYPAD WITH TRANSPONDER
€91,00 + TAX -
DKSTPT – TRANSPONDER
DKSTPT – TRANSPONDER READER
DKSTPT – TRANSPONDER READER IS IN PHASE OUT
REPLACED WITH : DKSTPMT -TRASPONDER READER IN ZAMAK CASEDKSTPT – TRANSPONDER READER
The DKSTPT transponder reader is Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).€57,00 + TAXDKSTPT – TRANSPONDER
€57,00 + TAX -
DKS1000R – INTERFACE 4CH
DKS1000R – INTERFACE 4CH
DKS1000R 4-CHANNEL INTERFACE
The interface 4CH DKS1000R box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€37,00 + TAXDKS1000R – INTERFACE 4CH
€37,00 + TAX -
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters. It is suitable for connection with
the DKS security system via a shielded unipolar wire carrying both the power supply
and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
CARHF2 system (consult the Liberté catalogue).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€86,00 + TAXDKS1000T – KEYPAD WITH BACKLIGHTING
€86,00 + TAX -
CRL170 MOTOR FOR ROLLING SHUTTERS
CRL170 / CRL 170 – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
CRL170 / CRL 170 SHUTTERS – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
230V geared motor permitting a maximum lifting power of 180kg.
An electric lock must be fitted to guarantee that the rolling shutter
locks in the closed position.
Precise and reliable, thanks to the integrated travel limits, this model
may fitted to all types of rolling shutter with a 60mm or 48mm drive
shaft diameter and a crown wheel diameter of 200mm e 220mm.
Maximum rolling shutter height 6m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€150,00 + TAXCRL170 MOTOR FOR ROLLING SHUTTERS
€150,00 + TAX -
ICONX WARNING FLASHING LIGHT
ICONX – 24-230V LED FLASHING LIGHT WITH ANTENNA
ICONX – LED FLASHING LIGHT 24V – 230V WARNING LIGHT WITH ANTENNA
Special version with acoustic signal of the moving leaf e transparent cap
that allows the luminous visualization of the LEDs
RGB (orange, red, green, purple, white) with Cardin Pro control units.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€54,00 + TAXICONX WARNING FLASHING LIGHT
€54,00 + TAX -
ICON – WARNING FLASHING LIGHT
ICON – 24-230V LED FLASHING LIGHT WITH ANTENNA
ICON – LED FLASHING LIGHT 24V – 230V WARNING LIGHT WITH ANTENNA
Multi-led warning flashing light with 433MHz antenna integrated in the circuit.
The light system is placed inside a shockproof container made of opalescent polycarbonate
that accentuates the realization of the luminous effect.
Selectable power supply on terminal board: 24Vac-dc – 230Vac.
Duty cycle 70%.
Steady light/flashing light selection jumper.
IP54 degree of protection.
Comes with relative column/wall support.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€35,00 + TAXICON – WARNING FLASHING LIGHT
€35,00 + TAX -
CDRREFLEX – REFLEX PHOTOCELL
CDRREFLEX / CDR REFLEX – PHOTOCELL
WITH SURFACE MOUNT CASE IP55
CDRREFLEX / CDR REFLEX – PHOTOCELL INFRARED BARRIERS PASSIVE REFLECTION PHOTOCELLS
WITH ADJUSTABLE OPTICS
CDRREFLEX / CDR REFLEX PHOTOELECTRIC PHOTOCELLS AND PASSIVE REFLECTION
POWER SUPPLY 12/24Vac-dc
Maximum range 10m.
Overall dimensions 50 x 90 x 60.
Shockproof container
Reflex photocell with IP55 degree of protection
Rotation range with respect to the standard position : ± 10°
Optic mounted on self-friction joints, adjustable both horizontally and vertically.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€68,00 + TAXCDRREFLEX – REFLEX PHOTOCELL
€68,00 + TAX -
CDR893 – MINI PHOTOCELL
CDR893 / CDR 893 – MINI PHOTOCELL
WITH SURFACE MOUNT CASE IP55
CDR 893 / CDR893 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
CDR893 / CDR 893 SINGLE-RELAY PHOTOELECTRIC PHOTOCELLS
Power supply 10…24Vac-dc.
Range: 4m indoors – 2m outdoors.
Transmitter cable 3 metres – Receiver cable 3 metres.SINGLE-BEAM INFRARED BARRIER PHOTOELECTRIC PHOTOCELLS
with a socket for mounting on a rail guide DIN46277.
Overall dimensions 60 x 45 x 117.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
CDR891-2 – MINI PHOTOCELL
CDR891-2 / CDR 891-2 – MINI PHOTOCELL
WITH SURFACE MOUNT CASE IP55
CDR 891-2 / CDR891-2 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
CDR891-2 / CDR 891-2 DOUBLE-RELAY PHOTOELECTRIC PHOTOCELLS
Power supply 12/24Vac-dc.
Range: 2,5m indoors.
Transmitter cable 15 metres – Receiver cable 10 metres.SINGLE-BEAM INFRARED BARRIER PHOTOELECTRIC PHOTOCELLS
Overall dimensions 90 x 50 x 20.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
FTR893C3 – MINI PHOTOCELL
FTR893C3 / FTR 893C3 – MINI PHOTOCELL
WITH SURFACE MOUNT CASE IP55
FTR 893C3 / FTR893C3 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
FTR893C3 / FTR 893C3 DOUBLE-RELAY PHOTOELECTRIC PHOTOCELLS
Power supply 12/24Vac-dc.
Range: 2,5m indoors.
Transmitter cable 4 metres – Receiver cable 4 metres.SINGLE-BEAM INFRARED BARRIER PHOTOELECTRIC PHOTOCELLS
Overall dimensions 90 x 50 x 20.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€46,00 + TAXFTR893C3 – MINI PHOTOCELL
€46,00 + TAX -
CDR892C3-2 MINI PHOTOCELL
CDR892C3-2 / CDR 892C3-2 – MINI PHOTOCELL
WITH SURFACE MOUNT CASE IP55 RANGE 15MCDR 892C3-2 / CDR892C3-2 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
CDR892C3-2 / CDR 892C3-2 DOUBLE-RELAY PHOTOELECTRIC PHOTOCELLS
Power supply 12/24Vac-dc.
Range: 15m indoors – 10m outdoors.
Transmitter cable 15 metres – Receiver cable 10 metres.DUAL-BEAM MULTIPLEX INFRARED BARRIER
Overall dimensions 90 x 50 x 20.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€102,00 + TAXCDR892C3-2 MINI PHOTOCELL
€102,00 + TAX