• CK200

    CK 200 / CK 200 – SENSITIVE EDGE CK200 / CK 200

    CK 200 / CK 200 – SENSITIVE EDGE CK200 / CK 200
    CK200 Resistive sensitive safty edge, according to the European standard EN 12978.

    The CK200 has To be installed with CSSENSOR electronic card.
    length 200 cm, without caps.

    It is replaced by the new sensitive coasts:
    MECHANICAL ACCESSORIES – SENSITIVE SAFTY EDGE ( RIBS) CARDIN with CODES:
    NC8K2Lxxx
    BBASLxxN
    CPxxBL
    BSHxxLxx

  • COP

    COP

    COP Wall cover for fixing the APRO / VEDO / PASSO series on a pre-existing installation.
    Pack of 2 pcs.

    COP

    17,00 + TAX
  • BP20BL - CP30BL- CP40BL- CP50BL- MECHANICAL PASSIVE EDGE Mechanical auxilary safety device for swing and sliding gates

    CP30BL – PASSIVE IMPACT EDGE

    CP30BL – PASSIVE IMPACT EDGE

    BP20BL – 2-METER PASSIVE IMPACT EDGE (PROFILE 70mm) – SAFETY DEVICES
    CP30BL – 3-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
    CP40BL – 4-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
    CP50BL – 5-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES

    PASSIVE IMPACT EDGE  – PASSIVE AUXILIARY DEVICES FOR SWING AND SLIDING GATES
    High profile 70mm / low 30mm – colour black.

    Low profile / high profile passive edge

    Although it is not to be considered a safeties devices due to the absence of an electrical contact.
    he passive edge has the same dimensions and mechanical protective characteristics as
    the active safety edge and does supply valid absorption protection against impact. The
    low profile edge, which works as simple impact protection, is suitable for closing
    devices where passing room is limited.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    39,0075,00 + TAX

    CP30BL – PASSIVE IMPACT EDGE

    39,0075,00 + TAX
  • CRL170 MOTOR FOR ROLLING SHUTTERS

    CRL170 / CRL 170 – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS

    CRL170 / CRL 170 SHUTTERS – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
    230V geared motor permitting a maximum lifting power of 180kg.
    An electric lock must be fitted to guarantee that the rolling shutter
    locks in the closed position.
    Precise and reliable, thanks to the integrated travel limits, this model
    may fitted to all types of rolling shutter with a 60mm or 48mm drive
    shaft diameter and a crown wheel diameter of 200mm e 220mm.
    Maximum rolling shutter height 6m.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • CS120

    CS 120 / CS120 – SENSITIVE EDGE CS120 / CS 120

    CS 120  / CS120 – SENSITIVE EDGE CS120 / CS 120
    CS120 / cs 120 Resistive sensitive safty edge, according to the European standard EN 12978.

    The CS 1200 has To be installed with CSSENSOR electronic card.
    length 120 cm, without caps.

    It is replaced by the new sensitive coasts:
    MECHANICAL ACCESSORIES – SENSITIVE SAFTY EDGE ( RIBS) CARDIN with CODES:
    NC8K2Lxxx
    BBASLxxN
    CPxxBL
    BSHxxLxx

  • CS180

    CS 180 / CS180 – SENSITIVE EDGE CS180 / CS 180

    CS 180  / CS180 – SENSITIVE EDGE CS180 / CS 180
    CS120 / cs 120 Resistive sensitive safty edge, according to the European standard EN 12978.

    The CS 180 has To be installed with CSSENSOR electronic card.
    length 180 cm, without caps.

    It is replaced by the new sensitive coasts:
    MECHANICAL ACCESSORIES – SENSITIVE SAFTY EDGE ( RIBS) CARDIN with CODES:
    NC8K2Lxxx
    BBASLxxN
    CPxxBL
    BSHxxLxx

  • CSSENSOR

    CSSENSOR

    CSSENSOR Electronic card for sensitive safty edges of the CK and CS series.
    24 V power supply.

    It is replaced by the new sensitive safty edges or coasts:
    MECHANICAL ACCESSORIES – CARDIN SENSITIVE SAFTY EDGE :
    1 – NC8K2Lxxx
    2 – BBASLxxN
    3 – CPxxBL
    4 – BSHxxLxx

  • DKS1000 – KIT KEYPAD + ITERFACE 4CH

    DKS1000 – KEYBOARD + INTERFACE KIT

    DKS1000 – KEYBOARD + INTERFACE KIT consists of two products:
    DKS1000T – BACKLIT KEYBOARD
    DKS1000R – 4CH INTERFACE

    DKS1000T – KEYPAD WITH BACKLIGHTING
    Surface-mounting IP57.
    The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
    confirm key (*) and one cancel key (#) by means of which it is possible to program
    the backlighting and other operational parameters.
    DKS1000R – 4 CHANNEL INTERFACE
    The interface box is easy to install and has the following features:
    – power supply 12 or 24Vac-dc;
    – 4 normally open relays (one for each channel);
    – management of up to 3 peripheral devices (keypads and/or transponder readers;
    – 1 multifunction key for the following functions: storing a code, cancelling a code,
    cancelling the entire memory content, inserting an activation code for the “remote
    memorisation” function. It is possible to store 1000 codes in memory with
    a maximum of 6 digits for each code. Each code can activate up to 4 channels
    (different functions).

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • DKS1000R – INTERFACE 4CH

    DKS1000R – INTERFACE 4CH

    DKS1000R 4-CHANNEL INTERFACE
    The interface 4CH DKS1000R box is easy to install and has the following features:
    – power supply 12 or 24Vac-dc;
    – 4 normally open relays (one for each channel);
    – management of up to 3 peripheral devices (keypads and/or transponder readers;
    – 1 multifunction key for the following functions: storing a code, cancelling a code,
    cancelling the entire memory content, inserting an activation code for the “remote
    memorisation” function. It is possible to store 1000 codes in memory with
    a maximum of 6 digits for each code. Each code can activate up to 4 channels
    (different functions).

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • DKS1000T – KEYPAD WITH BACKLIGHTING

    DKS1000T – KEYPAD WITH BACKLIGHTING

    DKS1000T – KEYPAD WITH BACKLIGHTING
    Surface-mounting IP57.
    The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
    confirm key (*) and one cancel key (#) by means of which it is possible to program
    the backlighting and other operational parameters. It is suitable for connection with
    the DKS security system via a shielded unipolar wire carrying both the power supply
    and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
    CARHF2 system (consult the Liberté catalogue).

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • DKSDUALT – KEYPAD WITH TRANSPONDER

    DKSDUALT – KEYPAD WITH TRANSPONDER

    DKSDUALT – KEYPAD WITH TRANSPONDER FUNCTION
    The DKSDUALT – KEYPAD WITH TRANSPONDER is Surface-mounting IP57.
    The DKSDUALT device has the following features:
    – 12 keys with backlighting;
    – backlighting controlled by the proximity sensor.
    Allows the interface to be activated by either typing in a code or by proximity
    reading an S500 transmitter, a TAG or a CARD.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • DKSTP – KIT TRANSPONDER + INTERFACE

    DKSTP – KIT TRANSPONDER + INTERFACE

    DKSTP – KIT DISCONTINUED IN PHASE OUT
    REPLACED BY THE KIT: DKSTPM

    DKSTP       – TRANSPONDER + INTERFACE KIT consists of two products:
    DKSTPT     – TRANSPONDER READER
    DKS1000R – 4CH INTERFACE

    DKSTPT – TRANSPONDER READER
    Surface-mounting IP57.
    Using dip-switch settings it is possible to program the backlighting and other
    operational parameters. It is suitable for connection with the DKS security system
    via a shielded unipolar wire carrying both the power supply and the data line. Allows
    the interface to be activated by proximity reading an S500 transmitter, a TAG or a
    CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
    system (consult the Liberté catalogue).
    DKS1000R – 4 CHANNEL INTERFACE
    The interface box is easy to install and has the following features:
    – power supply 12 or 24Vac-dc;
    – 4 normally open relays (one for each channel);
    – management of up to 3 peripheral devices (keypads and/or transponder readers;
    – 1 multifunction key for the following functions: storing a code, cancelling a code,
    cancelling the entire memory content, inserting an activation code for the “remote
    memorisation” function. It is possible to store 1000 codes in memory with
    a maximum of 6 digits for each code. Each code can activate up to 4 channels
    (different functions).

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

Main Menu