-
SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE
SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE 433MHz
SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE FOR SENSITIVE EDGE 433MHz
3V lithium battery power supply.
Safety edge signal input NC/8.2kΩ.
Maximum radio signal range 30m.
Shockproof case IP65.
ROLLING CODE FM RADIO system. transmission frequency: 433MHzIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€53,00 + TAXSAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE
€53,00 + TAX -
SAFEPRC8 – SAFETY EDGE TRANSCEIVER INTERFACE
SAFEPRC8 – SAFETY EDGE TRANSCEIVER INTERFACE 868MHz
SAFEPRC8 – SAFETY EDGE TRANSCEIVER INTERFACE FOR SENSITIVE EDGE 433MHz
3V lithium battery power supply.
Safety edge signal input NC/8.2kΩ.
Maximum radio signal range 30m.
Shockproof case IP65.
ROLLING CODE FM RADIO system. transmission frequency: 868MHzIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€53,00 + TAXSAFEPRC8 – SAFETY EDGE TRANSCEIVER INTERFACE
€53,00 + TAX -
SRCTX8E / SRCTX4E – SAFETY EDGE TRANSCEIVER INTERFACE
SRCTX8E / SRCTX4E / SRCTXE – SAFETY EDGE TRANSCEIVER INTERFACE 868MHz / 433MHz
SRCTX8E/ SRCTX4E / SRCTXE – SAFETY EDGE TRANSCEIVER INTERFACE FOR SENSITIVE EDGE
SRCTX8E – SAFETY EDGE TRANSCEIVER INTERFACE FOR SENSITIVE EDGE 868MHz
SRCTX4E – SAFETY EDGE TRANSCEIVER INTERFACE FOR SENSITIVE EDGE 433MHz
SAFETY EDGE TRANSCEIVER INTERFACE
Power supply 2 alkaline or lithium AA batteries.
Safety edge signal input NC/8.2kΩ.
Maximum radio signal range 20m.
Shockproof case IP65.
ROLLING CODE FM RADIO system. transmission frequency: 868MHz or 433MHz
Before ordering, choose the frequency you want to purchase: 433MHz or 868MHz
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€53,00 + TAX -
ICONX WARNING FLASHING LIGHT
ICONX – 24-230V LED FLASHING LIGHT WITH ANTENNA
ICONX – LED FLASHING LIGHT 24V – 230V WARNING LIGHT WITH ANTENNA
Special version with acoustic signal of the moving leaf e transparent cap
that allows the luminous visualization of the LEDs
RGB (orange, red, green, purple, white) with Cardin Pro control units.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€54,00 + TAXICONX WARNING FLASHING LIGHT
€54,00 + TAX -
NC8K2L16N – MECHANICAL EDGE CONTACT N.C.
NC8K2L16N – MECHANICAL EDGE CONTACT N.C.
NC8K2L16N – MECHANICAL EDGE N.C. CONTACT (L. 1,6m) – SAFETY DEVICE
NC8K2L20N – MECHANICAL EDGE N.C. CONTACT (L. 2.0m) – SAFETY DEVICE
NC8K2L25N – MECHANICAL EDGE N.C. CONTACT (L. 2,5m) – SAFETY DEVICE
NC8K2L30N – MECHANICAL EDGE N.C. CONTACT (L. 3.0m) – SAFETY DEVICEMECHANICAL SAFETY AUXILIARY DEVICES FOR SWING / SLIDING GATES
61mm high profile – N.C. contact output – black colour.Active mechanical safety edge with an N.C. contact for sliding gates / swing gates
The mechanical safety edge is used as a safety device in installations with automatic sliding gates with
horizontal movement and on other closing device installations (hinged gates etc.), where there is a real
risk of crushing or trapping.
Operation of the device is guaranteed by 2 micro-switches. Both of them intervene when the safety
edge and/or the pliable end caps are deformed.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€54,00 – €82,00 + TAXNC8K2L16N – MECHANICAL EDGE CONTACT N.C.
€54,00 – €82,00 + TAX -
SRCRX8E / SRCRX4E- STATIONARY TRANSCEIVER UNIT
SRCRX8E / SRCRX4E / SRCRXE – BI-CHANNEL STATIONARY TRANSCEIVER UNIT INTERFACE 868MHz
SRCRX8E / SRCRX4E / SRCRXE – BI-CHANNEL STATIONARY TRANSCEIVER UNIT INTERFACE
FOR SENSITIVE EDGE PHOTOCELLS OR GENERAL DEVICES
SRCRX8E – BI-CHANNEL STATIONARY TRANSCEIVER UNIT INTERFACE 868MHz
SRCRX4E – BI-CHANNEL STATIONARY TRANSCEIVER UNIT INTERFACE 433MHz
Power supply 12/24Vac-dc.
Maximum radio signal range 20m.
8 safety devices – 2 safety outputs NC/8.2kΩ.
Shockproof case IP65.
ROLLING CODE FM RADIO system. transmission frequency: 868MHz or 433MHZ
Before ordering, choose the frequency you want to purchase: 433MHz or 868MHz
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€54,00 + TAXSRCRX8E / SRCRX4E- STATIONARY TRANSCEIVER UNIT
€54,00 + TAX -
RSQ504C2
RSQ504C2 – 433MHz 2-CHANNEL SLOT-IN RECEIVER CARD (12 / 24Vac-dc).
RSQ504C2 – 433MHz 2-CHANNEL SLOT-IN RECEIVER CARD (12 / 24Vac-dc).
The unit RSQ504C2 Receiver card for direct insertion into a host appliance designed to
receive it. Fitted with 2 relay channels which can be set to ON/OFF or
impulsive.
Possibility of memorising up to 1000 codes.Overall dimensions(mm) 95 x 75 x 25.
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€55,00 + TAXRSQ504C2
€55,00 + TAX -
CDR851 – PHOTOCELL
CDR851 – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 60MCDR851 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in a waterproof plastic case.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR851).CDR851 PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 60m
The kit contains a pair of surface-mount photoelectric cells, 2 lens
covers for surface-mount photocells and 2 fast-fitting wall bracketsIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€55,00 + TAXCDR851 – PHOTOCELL
€55,00 + TAX -
RSQ508C2
RSQ508C2 – 868MHz 2-CHANNEL SLOT-IN RECEIVER CARD (12 / 24Vac-dc).
RSQ508C2 – 868MHz 2-CHANNEL SLOT-IN RECEIVER CARD (12 / 24Vac-dc).
The unit RSQ508C2 Receiver card for direct insertion into a host appliance designed to
receive it. Fitted with 2 relay channels which can be set to ON/OFF or
impulsive.
Possibility of memorising up to 1000 codes.Overall dimensions(mm) 95 x 75 x 25.
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€57,00 + TAXRSQ508C2
€57,00 + TAX -
DKSTPT – TRANSPONDER
DKSTPT – TRANSPONDER READER
DKSTPT – TRANSPONDER READER IS IN PHASE OUT
REPLACED WITH : DKSTPMT -TRASPONDER READER IN ZAMAK CASEDKSTPT – TRANSPONDER READER
The DKSTPT transponder reader is Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).€57,00 + TAXDKSTPT – TRANSPONDER
€57,00 + TAX -
BBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
BBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
BBASL07N – 0.7 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL10N – 1.0 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL12N – 1.2 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL18N – 1.8 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
MECHANICAL AUXILIARY DEVICES FOR SWING / SLIDING GATES
High profile 61mm – contact output N.C. – colour black.
Safety edge for garage doors N.C. contact
This mechanical device is an extremely versatile safety edge in aluminium that can be fitted to
overhead garage doors, rolling shutters and other industrial closing devices. The edges are fitted with
sealed micro-switches and have a series of accessories permitting a variety of combinations and uses.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€57,00 – €93,00 + TAXBBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
€57,00 – €93,00 + TAX -
DKSTPMT – TRANSPONDER IN ZAMAK CASE
DKSTPMT – TRANSPONDER READER IN ZAMAK CASE
DKSTPMT – TRANSPONDER READER IN ZAMAK CASE
TRANSPONDER READER Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
system.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€57,00 + TAXDKSTPMT – TRANSPONDER IN ZAMAK CASE
€57,00 + TAX