-
DKSTP – KIT TRANSPONDER + INTERFACE
DKSTP – KIT TRANSPONDER + INTERFACE
DKSTP – KIT DISCONTINUED IN PHASE OUT
REPLACED BY THE KIT: DKSTPMDKSTP – TRANSPONDER + INTERFACE KIT consists of two products:
DKSTPT – TRANSPONDER READER
DKS1000R – 4CH INTERFACEDKSTPT – TRANSPONDER READER
Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).
DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE
DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE
DKSTPM – TRANSPONDER IN ZAMA + INTERFACE KIT consists of two products:
DKSTPMT – TRANSPONDER IN ZAMA READER
DKS1000R – 4CH INTERFACEDKSTPMT – TRANSPONDER IN ZAMA READER
Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
system .DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€89,00 + TAXDKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE
€89,00 + TAX -
DKSTPMT – TRANSPONDER IN ZAMAK CASE
DKSTPMT – TRANSPONDER READER IN ZAMAK CASE
DKSTPMT – TRANSPONDER READER IN ZAMAK CASE
TRANSPONDER READER Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
system.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€57,00 + TAXDKSTPMT – TRANSPONDER IN ZAMAK CASE
€57,00 + TAX -
DKSTPT – TRANSPONDER
DKSTPT – TRANSPONDER READER
DKSTPT – TRANSPONDER READER IS IN PHASE OUT
REPLACED WITH : DKSTPMT -TRASPONDER READER IN ZAMAK CASEDKSTPT – TRANSPONDER READER
The DKSTPT transponder reader is Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).€57,00 + TAXDKSTPT – TRANSPONDER
€57,00 + TAX -
EDGE2
EDGE2 / EDGE 2 – REMOTE CONTROLS TRASMITTER 433,92 MHz
EDGE2 / EDGE 2 – REMOTE RADIO CONTROL TRASMITTER 433,92 MHz
EDGE 2E Portable transmitters 2 channels.
2-channel portable versions with code transfer function between two remote controls.
Black casing, bi-injection molded, with rubber top.
To have the maximum sensitivity and make the radio control indestructible.
Soft key ring supplied.
Compatible with TANGO SLIM series receivers (Old series in face out)
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€24,00 + TAXEDGE2
€24,00 + TAX -
EDGE20
EDGE20 / EDGE 20 – REMOTE RADIO CONTROL TRASMITTER 433,92 MHz
EDGE 20 REMOTE RADIO CONTROL 433,92 MHz
The EDGE20 remote radio control combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
Multichannel remote control for fast and intuitive control of 20 functions of EDGE receivers.
Innovative and refined container with a white LED display which, placed under the semi-transparent plastic.
Displays the selected channel. In the center there is a rubberized keyboard with three function keys
and two for channel up-down.
Equipped with practical non-slip rubber pads.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
EDGE230R4
EDGE230R4 / EDGE 230R4 RECEIVER 433,92 MHz
EDGE230R4 / EDGE 230R4 RECEIVER
The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
The refined design, sober and essential assures the maximum ergonomic comfort.
Edge range combines the simplicity of the fixed code to an excellent transmission range.
Special functions: self learning codes and possibility to copy codes
directly between transmitters.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€89,00 + TAXEDGE230R4
€89,00 + TAX -
EDGE4
EDGE4 / EDGE 4 – REMOTE RADIO CONTROL TRASMITTER 433,92 MHz
EDGE4 / EDGE 4 – REMOTE RADIO CONTROL TRASMITTER 433,92 MHz
EDGE 4 Portable transmitters 4 channels.
4-channel portable versions with code transfer function between two remote controls.
Black casing, bi-injection molded, with rubber top.
To have the maximum sensitivity and make the radio control indestructible.
Soft key ring supplied.
Compatible with TANGO SLIM series receivers (Old series in face out)If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€26,00 + TAXEDGE4
€26,00 + TAX -
EDGEOC2
EDGEOC2 / EDGE OC2 RECEIVER 433,92 MHz
EDGEOC2 / EDGE OC2 RECEIVER
The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
The refined design, sober and essential assures the maximum ergonomic comfort.
Edge range combines the simplicity of the fixed code to an excellent transmission range.
Special functions: self learning codes and possibility to copy codes
directly between transmitters.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€33,00€37,00+ TAXEDGEOC2
€33,00€37,00+ TAX -
EDGER4P
EDGER4P RECEIVER 433,92 MHz
EDGER4P / EDGE R4P RECEIVER
The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
The refined design, sober and essential assures the maximum ergonomic comfort.
Edge range combines the simplicity of the fixed code to an excellent transmission range.
Special functions: self learning codes and possibility to copy codes directly between transmitters.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€88,00 + TAXEDGER4P
€88,00 + TAX -
EDGERB2
EDGERB2 / EDGE RB2 RECEIVER 433,92 MHz
EDGERB2 / EDGE RB2 RECEIVER
The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
The refined design, sober and essential assures the maximum ergonomic comfort.
Edge range combines the simplicity of the fixed code to an excellent transmission range.
Special functions: self learning codes and possibility to copy codes
directly between transmitters.EDGE RB2 / EDGERB2 RECEIVER
EDGE RB2 compact size universal receiver 12/24 V ac/dc power supply. 2 channels.
Compatible with TANGO SLIM series remote control transmitters (Old series in face out)If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€60,00 + TAXEDGERB2
€60,00 + TAX -
EDGETAXI
EDGETAXI / EDGE TAXI – REMOTE RADIO CONTROL TRASMITTER 433,92 MHz
EDGE TAXI REMOTE RADIO CONTROL 433,92 MHz
EDGE TAXI 5 channels transmitter specially designed to be installed in the car.
The code transmission is repeated cyclically and autonomously.
Automatically repeats the radio signal improving convenience and safety for the driver.
The EDGETAXI remote radio control combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
Same refined container as the multichannel EDGE20 but with dedicated software for use in the car.
By briefly pressing one of the keys of the Taxi remote control.
In this way we add convenience and safety for those who drive the car.
A convenient self-adhesive fixing system is supplied to have the remote control always at hand.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount
