-
T10 CONTROL UNIT
T 10 – ELECTRONIC CONTROL UNIT
T10 – ELECTRONIC CONTROL UNIT
Control unit for roller shutters, with built in receiver.
Ideal for tubular or shutter motors.
It can also control lighting systems with 2 lamps at 230V.
Inputs for via wire controls.
Built-in receiver compatible with EDGE, NOIRE and FM400 series.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount
€60,00 + TAXT10 CONTROL UNIT
€60,00 + TAX -
T21X CONTROL UNIT
T21X – ELECTRONIC CONTROL UNIT
T21X / T 21X CONTROL UNIT – ELECTRONIC PROGRAMMER CONTROLLING ONE 230V MOTOR
ECU for rolling grills or rolling shutters max. 1300W. Ideal for tubular
motors or rolling shutters and fitted with with torque limitation, a
programmable 24V warning light output (flashing or continuous
activation) and a 230V courtesy light output.
Protection grade IP55.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€75,00 + TAXT21X CONTROL UNIT
€75,00 + TAX -
T624 CONTROL UNIT
T624 – CONTROL UNIT MOTORS 24V
T624 / T 624 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T624 for 2 motors 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€199,00 + TAXT624 CONTROL UNIT
€199,00 + TAX -
EDGERB2
EDGERB2 / EDGE RB2 RECEIVER 433,92 MHz
EDGERB2 / EDGE RB2 RECEIVER
The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
The refined design, sober and essential assures the maximum ergonomic comfort.
Edge range combines the simplicity of the fixed code to an excellent transmission range.
Special functions: self learning codes and possibility to copy codes
directly between transmitters.EDGE RB2 / EDGERB2 RECEIVER
EDGE RB2 compact size universal receiver 12/24 V ac/dc power supply. 2 channels.
Compatible with TANGO SLIM series remote control transmitters (Old series in face out)If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€60,00 + TAXEDGERB2
€60,00 + TAX -
WIN3
EDGE WIN3 – REMOTE RADIO CONTROL TRASMITTER 433,92 MHz
EDGE WIN3 REMOTE RADIO CONTROL 433,92 MHz
EDGEWIN3 wall-mounted transmitter compatible with EDGE series.
Combined with T10 receiver permits to add one control point for
motorized shutters, awnings or lights.
There are three function keys and a signaling LED.
Ideal to avoid all the masonry work usually necessary to add a wired switch.
The EDGEWIN3 remote radio control combines the simplicity of the fixed code
with an excellent radio range at 433.92 MHz.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
FM402E
FM402E – REMOTE CONTROL
FM402E – REMOTE CONTROL WITH FREQUENCY MODULATION
The FM400 radio controls and receivers offer high performance and safety thanks to the transmission
in frequency modulation at 433.92 MHz and with the Rolling-Code system which makes it non-clonable.
All FM transmitters can be customized with family code using the PRG FM programmer.
The refined, sober and essential design of the radio controls ensures maximum ergonomic comfort.
The range of radio controls is completed by receivers with self-learning code, removable memory and programmable outputs.
Special functions: self learning and the possibility to add codes remotely.FM402E REMOTE CONTROL
Multichannel remote control FM402E for fast and intuitive control of 2 functions of FM400 receivers.
Innovative and refined container with a white LED display which, placed under the semi-transparent plastic,
displays the selected channel. In the center, a rubberized keyboard with three function keys and two for channel up-down.
Equipped with practical non-slip rubber pads.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€25,00 + TAXFM402E
€25,00 + TAX -
ILBINO SINCRO
ILBINO SINCRO
ILBINO SINCRO photocell
Programmable infrared photocell.
ILBINO SINCRO PHOTOCELL is ideal for complex systems with up to 8 pairs of photocells thanks to the new synchronism system.
The power supply can be 24V alternating or direct, without polarity references.
ILBINO SINCRO
Pair of synchronized mini photocells.
Range 25 m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€36,00 + TAXILBINO SINCRO
€36,00 + TAX -
GL STAR1E
GL STAR 1E /GL STAR1E – SLAVE SELF-LOCKING SWINGING GARAGE DOOR MOTOR 230V
GLSTAR 1E /GLSTAR1E – MOTOR IN PHASE OUT
REPLACED WITH MOTORS : GLMECHA24S – GLMECHA230SGL STAR 1E / GL STAR1E – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD GARAGE DOORS 230V
Electromechanical gearmotor 230 V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.GLSTAR 1E /GL STAR1E SELF-LOCKING GARAGE DOOR MOTOR
with a 230V slave motor for garage doors 2,5 m and 8 m2 . -
HLBOXC
HLBOXC : HOT-GALVANIZED FOUNDATION GEAR MOTOR IN CATAPHORESIS + SBLSHL RELEASE WITH LEVER
HLBOXC Foundation box or HEMBEDDED CASE for underground electromechanical gearmotor 24 V 230 V ideal for swing gates up to 3 meters.
Equipped with encoder and easy release.
Safe thanks to the precision and sensitivity of the encoder and to the slowdowns in opening and closing.
Practical thanks to the control unit with quick connection and self-learning receiver.
Adjustable limit switches integrated in the case.
Reliable with perfect watertightness and solid and robust mechanics.HLBOXC EMBEDDED CASE
Complete with connection lever and adjustable mechanical travel limits.
Foundation box in hot-dip galvanized cataphoresis complete with connection
levers and mechanical stops adjustable in opening and closing.+ SBLSHL Release with lever for HLBOX or HLBOXI foundation boxes
All versions are fitted with a stainless steel cover.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€211,00 + TAXHLBOXC
€211,00 + TAX -
PRG900CB
PRG900CB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
PRG900CB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS + charger and NiMH batteries
Electronic PRG900CB control unit programmer for the control of 24Vdc hinged gates with
intelligent time control functions that allow you to control the position of
the hinged and sliding gates, .The PRG900CB control uniti fitted with a multi-decoding module S449
– S486 – S504 – S508. Gate travel time programming is fully automatic
and guided by a 6-digit display which allows you to visualise the number
of manoeuvres carried out and to set several parameters such as the
type of motor, the torque setting and the limited opening distance.Dip-switches allow you to set the system parameters including: the
sequential button mode, automatic reclosing, warning lamp pre-flashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting and electric lock enable.PRG900CB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
PRG900CB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS + charger and NiMH batteries
Electronic PRG900CB control unit programmer for the control of 24Vdc hinged gates with
intelligent time control functions that allow you to control the position of
the hinged and sliding gates, .The PRG900CB control uniti fitted with a multi-decoding module S449
– S486 – S504 – S508. Gate travel time programming is fully automatic
and guided by a 6-digit display which allows you to visualise the number
of manoeuvres carried out and to set several parameters such as the
type of motor, the torque setting and the limited opening distance.Dip-switches allow you to set the system parameters including: the
sequential button mode, automatic reclosing, warning lamp pre-flashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting and electric lock enable.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount
