-
CDR892C3-1 MINI PHOTOCELL
CDR892C3-1 / CDR 892C3-1 – MINI PHOTOCELL
WITH SURFACE MOUNT CASE IP55 RANGE 15MCDR 892C3-1 / CDR892C3-1 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
CDR892C3-1 / CDR 892C3-1 DOUBLE-RELAY PHOTOELECTRIC PHOTOCELLS
Power supply 12/24Vac-dc.
Range: 15m indoors – 10m outdoors.
Transmitter cable 10 metres – Receiver cable 7 metres.DUAL-BEAM MULTIPLEX INFRARED BARRIER
Overall dimensions 90 x 50 x 20.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€96,00 + TAXCDR892C3-1 MINI PHOTOCELL
€96,00 + TAX -
CDRX12 PHOTOCELL
CDRX12 – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 10MCDRX12 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
CDRX12 – HYBRID INFRARED BARRIERS PHOTOCELLS WITH ADJUSTABLE LENSES
RECEIVER POWER SUPPLY 12/24Vac-dc
PROJECTOR POWER SUPPLY 3V WITH A LITHIUM BATTERY
MAXIMUM RANGE 10m
PROTECTION GRADE IP55CDRX12 PHOTOCELLS are a next generation infrared safety system, particularly suited to the protection of passageways (traffic
and pedestrian) that are fitted with automatic opening and closing systems. The electronic circuit respects the
most up to date standards and regulations and conforms to the standard 3 of the UNI EN 13849-1 (update of the
EN954-1). It is possible to connect up to 3 pairs of photocells and synchronise the transmission (multiplex system).
The necessity of guaranteeing greater ambient noise immunity has led to the evolution of both the transmitter and
receiver cards. The system is based on the criteria “resistance to single failure” that guarantees the maintenance of
safety in case of electrical problems.
The receiver should be installed close to the electronic programmer and wired up drawing its 12/24V power supply
directly from the programmer while the projector can be installed on any surface and doesn’t require wiring. Power
is supplied by a solar panel when light is present and by a 3V lithium battery when insufficient light is available.
The batteries lifespan can be optimised by setting the energy saving function and varying the cut-in time and the
installation distance between the two photoelectric cells.€96,00 + TAXCDRX12 PHOTOCELL
€96,00 + TAX -
RCQ504W00 MULTIPROTOCOL INTERFACE
RCQ504W00 – 433MHz MULTIPROTOCOL INTERFACE IN BOX (12 / 24Vac-dc).
RCQ504W00 – 433MHz MODULAR STANDARD OUTDOOR MULTIPROTOCOL INTERFACE IN BOX (12 / 24Vac-dc).
Power supply 12/24Vac-dc.
Electrical input 20mA.
Overall dimensions 148 x 118 x 40.
All weather box in ABS – IP55.
Carrier frequency 433,92MHz – 868,3MHz.
The interface is able to decode a radio frequency signal coming
from a S504-S508 transmitter or via cable from a DKS1000T,
DKSTPT, DKSDUALT and output a Wiegand/ISO-3554 digital signal,
containing the transmitter code, in 13 different formats.
It is fitted with a USB for connection to a PC and an input that can be
connected to a timer or a switch with the aim of enabling or disabling
the interface over different time periods. Rolling Code management
with transmitter memorization on the interface.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€95,00 + TAXRCQ504W00 MULTIPROTOCOL INTERFACE
€95,00 + TAX -
TXQPRO504-4A
TXQPRO504-4A INDUSTRIAL ROLLING CODE TRANSMITTER / REMOTE CONTROL
TXQPRO504-4A INDUSTRIAL TRANSMITTER S504, FM DIGITAL REMOTE CONTROL WITH ROLLING CODES – EXTERNAL ANTENNA
4-function pre-coded remote control transmitter (433MHz)
Container in shockproof, water-proof material IP65.
Power supply 6V with lithium batteries 2 x CR123A.
Overall dimensions 50 x 145 x 26.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€95,00 + TAXTXQPRO504-4A
€95,00 + TAX -
TXQPRO508-4A
TXQPRO508-4A INDUSTRIAL ROLLING CODE TRANSMITTER / REMOTE CONTROL
TXQPRO508-4A INDUSTRIAL TRANSMITTER S508, FM DIGITAL REMOTE CONTROL WITH ROLLING CODES – EXTERNAL ANTENNA
4-function pre-coded remote control transmitter (868MHz)
Container in shockproof, water-proof material IP65.
Power supply 6V with lithium batteries 2 x CR123A.
Overall dimensions 50 x 145 x 26.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€95,00 + TAXTXQPRO508-4A
€95,00 + TAX -
BBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
BBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
BBASL07N – 0.7 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL10N – 1.0 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL12N – 1.2 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL18N – 1.8 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
MECHANICAL AUXILIARY DEVICES FOR SWING / SLIDING GATES
High profile 61mm – contact output N.C. – colour black.
Safety edge for garage doors N.C. contact
This mechanical device is an extremely versatile safety edge in aluminium that can be fitted to
overhead garage doors, rolling shutters and other industrial closing devices. The edges are fitted with
sealed micro-switches and have a series of accessories permitting a variety of combinations and uses.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€57,00 – €93,00 + TAXBBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
€57,00 – €93,00 + TAX -
FM400230R4
FM400R4P – REMOTE CONTROL RECEIVER
FM400R4P / FM400 R4P – REMOTE CONTROL RECEIVER WITH FREQUENCY MODULATION
The refined design, sober and essential assures the maximum ergonomic comfort.
FM range combines the security of the rolling code to an excellent immunity to radio interferences.
Special functions: self learning and the possibility to add codes remotely.FM400 R4P / FM400R4P RECEIVER
Receiver with 230 V power supply and four outputs with power contact (max 5 A 230 V) in switching and voltage free.
Code self-learning, programmable outputs with 3 different modes and watertight box (IP56).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€93,00 + TAXFM400230R4
€93,00 + TAX -
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER FUNCTION
The DKSDUALT – KEYPAD WITH TRANSPONDER is Surface-mounting IP57.
The DKSDUALT device has the following features:
– 12 keys with backlighting;
– backlighting controlled by the proximity sensor.
Allows the interface to be activated by either typing in a code or by proximity
reading an S500 transmitter, a TAG or a CARD.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€91,00 + TAXDKSDUALT – KEYPAD WITH TRANSPONDER
€91,00 + TAX -
FM400R4P
FM400R4P – REMOTE CONTROL RECEIVER
FM400R4P / FM400 R4P – REMOTE CONTROL RECEIVER WITH FREQUENCY MODULATION
The refined design, sober and essential assures the maximum ergonomic comfort.
FM range combines the security of the rolling code to an excellent immunity to radio interferences.
Special functions: self learning and the possibility to add codes remotely.FM400 R4P / FM400R4P RECEIVER
Receiver with 230 V power supply and four outputs with power contact (max 5 A 230 V) in switching and voltage free.
Code self-learning, programmable outputs with 3 different modes and watertight box (IP56).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€91,00 + TAXFM400R4P
€91,00 + TAX -
SSB-508
SSB-508 – NUMERICAL CODE KEYPAD VIA RADIO (868MHz)
SSB-508 – NUMERICAL CODE KEYPAD VIA RADIO QUARTZ DIGITAL REMOTE CONTROL WITH ROLLING CODES
Container in shockproof polycarbonate IP57.
3V lithium battery power supply (ZRA3.0-3.8-W).
Number of code available combinations: 1.000.000.
Possibility of memorising up to 500 user codes.
Manages up to 4 distinct functions and communicates with all S504
(433MHz) and S508 (868MHz) standard receivers.
Backlighting is controlled by a proximity light sensor.
Overall dimensions 74 x 130 x 20.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€90,00 + TAXSSB-508
€90,00 + TAX -
DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE
DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE
DKSTPM – TRANSPONDER IN ZAMA + INTERFACE KIT consists of two products:
DKSTPMT – TRANSPONDER IN ZAMA READER
DKS1000R – 4CH INTERFACEDKSTPMT – TRANSPONDER IN ZAMA READER
Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
system .DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€89,00 + TAXDKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE
€89,00 + TAX -
EDGE230R4
EDGE230R4 / EDGE 230R4 RECEIVER 433,92 MHz
EDGE230R4 / EDGE 230R4 RECEIVER
The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
The refined design, sober and essential assures the maximum ergonomic comfort.
Edge range combines the simplicity of the fixed code to an excellent transmission range.
Special functions: self learning codes and possibility to copy codes
directly between transmitters.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€89,00 + TAXEDGE230R4
€89,00 + TAX