T124 CONTROL UNIT

152,00 + TAX

In stock

T124 -  CONTROL UNIT MOTORS 24V

T124 / T 124 - ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T124 for 1 motor 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
- second channel OC2 output (contact US1);
- connection for the keypad TAST3F;
- BSA and BSC inputs for 8K2 safety edges.

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

Compare

T124 –  CONTROL UNIT MOTORS 24V

T124 / T 124 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T124 for 1 motor 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

T124 ELECTRONIC CONTROL UNIT 24V  TELCOMA CARDIN

MAINS POWER SUPPLY 230Vac
MOTOR OUTPUT 24Vdc
PROTECTION GRADE IP55
FIREPROOFING GRADE V2
AUTOMATIC GATE/DOOR PROGRAMMING
Electronic devices for the control of automatic opening systems with one or two gate leaves.
Powered by 24Vdc they intelligently manage the movement of the gate.
The appliances either work with encoder controlled or timer controlled gate
positioning (automatic system detection).
Specially studied and designed for this type of use.
These programmers are fitted with digital time programming thus markedly reducing the installation time.
The complete range of products have been designed and constructed in
accordance with the safety standards.

Open collector:
The product range is factory set for the insertion of an open collector receiver.
The card that guarantees compatibility with all the radio control series available in the
catalogue Cardin Telcoma.

TECHNICAL SPESIFICATIONS   T124

Power supply                                            230 Vac
Motor power supply                                   24 Vdc
Motor output                                             n. 2
Max. motor power                                     2×180 VA
Protection level                                         IP 56
Connector for CS2/SR receiver                  YES
Electronic torque adjustment                    YES
Encoder                                                   YES
Self-learning times                                    YES
Step-by-step push button                          YES
Open push button                                      YES*
Close push button                                     YES*
Stop push button                                      YES
Limit switch                                              YES
Photocell                                                  YES
Automatic closure                                     YES
Slowing down                                           YES
Electronic brake                                       YES

ACCESSORIES T124

SERIE OC2
2 channels plug in receiver.
SUPBAT
Pair of brackets to fix 2 BAT12V2A to the cover  of control units box.
BAT12V2A
Battery 12V 2Ah.
CB24
24 V battery charger. Suitable for 24 V control units.
LACO 24AL
Flashing light 24 V (only lamp) with built in 433 MHz antenna.
SUN POWER
Solar power kit with solar panel and battery.
Suitable for all 24 V control units.

Additional information

Weight 3 kg
Dimensions 0,20 × 0,40 × 0,20 m
Be the first to review “T124 CONTROL UNIT”

Your email address will not be published. Required fields are marked *

CAPTCHA ImageChange Image

Reviews

There are no reviews yet.

See It Styled On Instagram

    No access token

Main Menu