RCQ433-WF

RCQ433-WF – 433MHz RECEIVER WITH LCD DISPLAY AND WIFI

RCQ433-WF – 433MHz RECEIVER WITH LCD DISPLAY AND WIFI FUNCTIONS (12/24Vac-dc).
The RCQ433-WF receiver  can be fitted with up to four programmable relay
modules MCCMORPHM1 (impulsive, ON-OFF or timer controlled).
1 relay inserted.
Possibility of memorising up to 3000 codes.
USB connection and 2G-3G-WiFi module for remote user and
activation of the output relays.
The RCQ433/868-3G10 receivers include a 10 year subscription
with our partner Vodafone.

All weather box in ABS – IP55.
Overall dimensions 135 x 175 x 85.

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

RECEIVERS

The RCQ433-WF receivers are available in all the classic Cardin versions: outdoor receivers 12-
24V with display, with LCD display and 3G/WiFi functions, 230V radio programmers
in watertight cases with flip up access covers, mini receiver units to be installed in
appliances which already have a protective casing and slot-in receiver cards for direct
insertion into host appliances designed to receive them:
– outdoor receiver with a multi-decoding module S449 – S486 – S504 – S508,
LCD display and 3G-WiFi functions;
– standard outdoor receivers;
– outdoor receivers with display;
– 2-channel mini receivers, slot-in receiver cards;
– 2-channel open collector receiver cards;
– outdoor radio programmers;
– multiprotocol interface.

RECEIVERS WITH LCD DISPLAY AND 3G/WiFi FUNCTIONS

Thanks to the inbuilt 2G-3G or WiFi module of RCQ433-WF receivers , avant-garde software and a highly
efficient signal reception apparatus the receivers allows the remote management
(without range limits) of all installations that require remote control via radio (automatic
entry systems, access control, car-parks etc.).

The appliance is ideally suited to multi-user installations (up to 3000 transmitters can be memorised)
and ones that require frequent upgrading and modification of the codes.
The USB connection, the programming and setting buttons and the efficient display allow the appliance to
be easily configured.
The installation management functions are: transmitter code memorization/
cancellation and programming the function mode for each single output.
The receiver can manage up to four programmable channel modules (impulsive/
ON-OFF/timer controlled, NO/NC contact type and power on reset).

Technical description of the receiver

The RCQ433-WF receiver also features a Real Time Clock which can be used to set the time bands during
which the outputs are active.
It also features, the RCQ433-WF receiver, as well as a non volatile memory module which can
store up to 100000 relay activation events which may be downloaded during a normal connection and consulted at will.

CARDINTX_SW

The CARDINTX_SW software that can be downloaded from the website www.cardin.
It allows the stored user codes to be managed by means of one of three possible connection methods: direct via USB
cable, using the mobile communications network with a 2G/3G module or using a
WF module.

One or more outputs of RCQ433-WF receiver can be remotely activated over the phone or via
SMS with an installed 2G/3G module or using an App.

Four independent inputs are also available which can be used to monitor external
appliances the status of which can be obtained from the receiver via SMS or an App.
Using the Cardin software it is possible to set the receiver’s 4 inputs according
to the requirements of the installation.
As soon as an event such as resetting the position status of the door, security devices intervening, presence/absence of power
etc. is detected, the receiver will send a personalised message to the pre-registered
e-mail addresses.
Thanks to this system the 3G receiver becomes a very useful maintenance management tool.

RCQ433-WF ACCESSORIES

MCCMORPHM1  : STRIP WITH 1 PROGRAMMABLE RELAY (S504 – S508)
The relay can be set on the receiver to one of the functions.

CODE MEMORY MODULES RCQ433-WF
Extractable and furnished with non volatile memory, this EEPROM
contains the system code
MCC24LC256        : 3000-CODE MEMORY MODULE
MCC24LC512        : 5000-CODE MEMORY MODULE
ZGB24LC256-I/P : 3000-CODE MEMORY MODULE