METALDEC024X – SELF-CALIBRATING METAL DETECTOR 24V

METALDEC024X – SELF-CALIBRATING METAL DETECTOR 24V

METALDEC024X – SELF-CALIBRATION METAL  DETECTOR METALLIC MASS DETECTOR 24V MOUNTING ON DIN RAIL
Power supply::                       24Vac-dc 100mA
Sensitivity:                            8 levels
Relay output:                         2 (max 1A 30V)
Operating temperature range: -20°…+55°C
Protection grade:                   IP40
Overall dimensions:               101 x 71 x 35.

DOUBLE RELAY WITH SERIAL EXCHANGE NO-NC
SENSITIVITY SELECTOR H-M-L AND RESET BUTTON
UNDECAL CONNECTION FOR DIN RAIL GUIDE
RAIL GUIDE SOCKET DIN 46277
SENSITIVITY SELECTION DIP-SWITCHES

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

SINGLE COIL METALLIC MASS DETECTOR

POWER SUPPLY 24Vac-dc / 230Vac
AUTOMATIC CALIBRATION
SENSITIVITY ADJUSTMENT
MULTIPLE RELAY OUTPUT

Device for detecting the presence of metallic masses in a magnetic field generated by a special
external circuit (sensitive coil) connected to it. The appliance can be used to control either single or
multiple passageways connected to a computer with the possibility of detecting the direction in which
the traffic is moving (rapid passage mode up to 100km/h). Multiple appliances working together
allow you to have real time control over the parking situation in a variable number of parking lots in
one or more zones.

The system is made up of four components:
– a detection device contained in a special protective case;
– socket for fitting on panelling or rails DIN46277 (METALDEC only);
– a sensitive element (not supplied by us) that should be made up of a multipolar cable with one or
more wires and must respect the measurements as specified in the drawings;
– a bipolar cable (not supplied by us) with which to connect the sensitive element to the detecting
device.
If you use two single-wire cables these should be loosely wound together.