KIT EVO 600

KIT EVO 600 / KIT EVO600  : GEARMOTORS FOR SLIDING GATES

KIT EVO 600 / KIT EVO600 : GEARMOTORS FOR SLIDING GATES 600Kg
Electromechanical gearmotor in grease lubrication.
Ideal for industrial sliding gates up to 600 Kg.
Complete with encoder, magnetic limits and built built-in control unit.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Versatile fixing plate with adjustable height and depth.
Reliable with a sturdy aluminum base treated against oxidation and all moving parts in oilbath.
Constant performance over time and in any condition thanks to reduced wear&tear
and the possibility to maintain the oil at the ideal temperature using HOT (optional).
Manual release with coded lock.

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

EVO 600
230 V electromeccanical gearmotor in grease lubrication..
For residential/industrial sliding gates up to 600kg.
Complete with encoder, magnetic limits, electronic brake and a built-in control unit.
Constant performance over time and in any condition thanks to reduced wear&tear .
The appliance is fitted with a safe and secure key-operated manual
release system protected by a plastic access door.

KIT EVO 600 CONTAINING:

EVO 600
230 V electromeccanical gearmotor in grease lubrication..
NOIRE OC2 /EDGE OC2
2 channels plug in receiver
NOIRE 2E / EDGE 2
2 channels rolling code transmitter
APRO
Key selector
VEDO 180
Pair of adjustable photocells
LACOLED24-23O
Flashing light with antenna
SUPLACO
Flashing light support

Fixing accessories and warning sign included.

AUTOMATION FOR SLIDING GATES TELCOMA GEARMOTORS SERIES EVO

Electromechanical EVO600 gear motor suitable for gate positioning control and safety
system management. Ideal for residential/industrial sliding gates powered by 230V.
Powerful, rapid and controlled by state of the art electronics, the gate automation
units are fitted with powerful motors backed up by a finely tuned double gear
kinematic system which reduces the stress on the motor and structure caused by
the movement of gates.

The reduction unit stator is made of die cast aluminium and contains a never
ending screw immersed in an oil bath (lubricated with grease for the EVO 600).
Installation, on a robust and rust proof base, is possible on any structure and the
unit may be fitted both to the right as well as to the left of the passageway.

The integrated programmer of EVO600 gear motor allows encoder-controlled gate positioning
and selfprogramming thus reducing installation times to a minimum and optimising the
programming procedure.
The electronic control unit of EVO 600 is completed by the anti-crush and “soft start” and “soft
stop” functions.

TECHNICAL SPECIFICATIONS EVO 600

Motor power supply                         230 V
Max. motor current                         3,4 A
Motor power                                   400 W
Max. torque                                    21 Nm
Thrust                                           640 N
Max gate weight                             600 Kg
Actuator speed                              10 m/min
Work cycles                                   intensive
Encoder                                        YES
Magnetic limit switch                      YES
Thermal protection                        150 °C
Oil lubricant                                  TS20

TECHNICAL SPECIFICATIONS BUILT IN CONTROL UNIT EVO 600

Model                                          T101
Power supply                                230 V
Max. current                                 6,3 A
Electronic slow down                     YES

GENERAL DATA EVO 600
Working temperature                    -20 +55 °C
Protection level                             IP 44
Weight                                         15 Kg
Pallet                                           30 pcs

ACCESSORIES EVO 600

CREM P
Plastic rack with steel core. M4 28×22 mm, complete with washers and self boring screws 6,3×25.
Pack of 10 pcs 1 m each.

CREM12
Metal rack. M4 30×12 mm, complete with weldable spacers DSC, screws M8x25 TE and washers O 8.
Pack of 4 pcs 1 m each.

KIT SBLESTEVO
External unlocking kit for EVO600.

CPEVO
Base plate.

RVS
Meccanical brake for gates on sloping ground.

SERIE  EDGREOC2 / NOIREOC2 / FM400OC2
2 channels plug in receiver for control unit of SLEVO800 gear motor.

DSC
Weldable spacers for CREM12 and CREM8.
Pack of 30 pcs.
DAC
Screwable spacers for CREM12 and CREM8.
Pack of 30 pcs.
DAP
Screwable and adjustable spacers for CREM12 and CREM8.
Pack of 3 pcs.