FM400230R4

FM400230R4 – REMOTE CONTROL  RECEIVER

FM400230R4 / FM400 230R4 – REMOTE CONTROL RECEIVER WITH FREQUENCY MODULATION
The refined design, sober and essential assures the maximum ergonomic comfort.
FM range combines the security of the rolling code to an excellent immunity to radio interferences.
Special functions: self learning and the possibility to add codes remotely.

The FM400230R4  radio controls receiver offer high performance and safety thanks to the transmission
in frequency modulation at 433.92 MHz and with the Rolling-Code system which makes it non-clonable.
All FM transmitters can be customized with family code using the PRG FM programmer.
The refined, sober and essential design of the radio controls ensures maximum ergonomic comfort.
The range of radio controls is completed by receivers with self-learning code, removable memory and programmable outputs.

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

FM400 230R4 / FM400230R4 RECEIVER
Receiver with 230 V power supply and four outputs with power contact (max 5 A 230 V) in switching and voltage free.
Code self-learning, programmable outputs with 3 different modes and watertight box (IP56).

FM TRANSMITTERS COMPATIBLES

FM 402E e FM 404E
Portable transmitters 2/4 channels.

FM420
FM 420 Multichannel transmitter to control up to 20 automations.

FM400 TAXI
FM TAXI 5 channels transmitter specially designed to be installed in the car. Automatically repeats the
radio signal improving convenience and safety for the driver.

TECHNICAL SPECIFICATIONS FM400 230R4

Power supply                                                                           230 V
Consumption in Stand-by                                                          12 mA
Relay contact max capacity                                                       5 A
Relay contact max voltage                                                         230 V
Number of outputs                                                                    4
Storage codes                                                                          500
Storage codes with MEM64                                                         1012
Protection level                                                                         IP 56
Working temperature                                                                 -20 +55 °C

DIGITAL QUARTZ RADIO CONTROLS WITH ROLLING CODESRADIO CONTROL SYSTEMS

433MHz – 868MHz FM ROLLING CODE
2128 CODE COMBINATIONS
REMOTE TRANSMITTER MEMORISATION
RFID: WIRELESS MEMORY
AERIAL ANS400 – ANQ800-1
AVAILABLE TRANSMITTER CHANNELS 2-4-8
AVAILABLE TRANSCEIVER CHANNELS 2-4
RANGE 100 – 150 m
MORE THAN 4 BILLION PRE-CODED TRANSMITTER CODES
An extremely secure state-of-the-art radio control system with 128 bit cryptography. The system has gathered
together a series of specific appliances under a single working protocol aimed at the remote control of automatic
and security installations. Solutions for all possible uses: control of automatic installations for gates and doors,
the command and control of automatic rolling shutters and sun blinds, the activation of alarm and access control
systems as well as the activation of all ON-OFF or timer-controlled systems. Adopting the S504 – S508 system
doesn’t just offer high levels of efficiency but also provides practicality for the user and an extremely useful and
manageable appliance for the installer.
NETWORK CONNECTIVITY
The S504 – S508 range interacts with an evolved system consisting of a server dedicated to the 3G/WF connection
by means of appliances and software for computers and smart phones.

DIGITAL ROLLING CODE TRANSMITTERS 128 BIT WITH 2/4/8 CHANNELS

The transmitters, powered by a 3-volt lithium batteries (1 x CR2032) with a range of from 100 to 150 metres, are
pre-coded in the factory with a unique identification number printed on the rear so as to allow memorisation in lots
on the receiver and can be enabled without the presence of the receivers from a remote location through the use of
a second transmitter that has already been memorised in the system. They are fitted with a key-lock function which
when selected protects the appliance from any accidental activation and automatic shut down that cuts in after at
least twenty seconds of continuous activation in order to reduce battery consumption. The bidirectional transmitters
(transceivers) receive a confirmation signal allowing you to control an operation from a remote location.
QUARTZ RECEIVERS WITH THE POSSIBILITY OF MEMORISING UP TO 1000 USER CODES
The receivers are available in all the classic Cardin versions: outdoor receivers 12-24V with display, with LCD display
and 3G/WF functions in watertight cases IP55, mini receiver units to be installed in appliances which already have
a protective casing and slot-in receiver cards for direct insertion into host appliances designed to receive them. A
code and memory programming base via USB allows the transmitters to be memorised in blocks and access to the
remote memorisation function thanks the to RFID technology fitted into the transmitters.

ACCESSORIES

 PRG FM400
Programming unit for adding/erasing transmitter codes and managing families of codes.
Complete with power supply.

DAMA430
Antenna for 433 MHz receivers, complete with stainless steel bracket and connection cable (3 m).