EDGER4P

EDGER4P RECEIVER 433,92 MHz

EDGER4P / EDGE R4P RECEIVER
The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
The refined design, sober and essential assures the maximum ergonomic comfort.
Edge range combines the simplicity of the fixed code to an excellent transmission range.
Special functions: self learning codes and possibility to copy codes directly between transmitters.

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

EDGE R4P / EDGER4P RECEIVER
EDGE R4P external universal receiver 4 channels.
12/24 V ac/dc power supply IP44.
Compatible with TANGO SLIM series remote control transmitters (Old series in face out)
EDGE R4P external universal receiver 4 channels.
Code self-learning, programmable outputs with 3 different modes and watertight box (IP56).

EDGE TRANSMITTERS COMPATIBLE

EDGE2
EDGE 2E  Portable transmitters 2 channels.

EDGE4
EDGE 4E Portable transmitters 4 channels.

EDGE20
EDGE 20 Multichannel transmitter to control up to 20
automations.

EDGETAXI
EDGE TAXI 5 channels transmitter specially designed to be installed in the car.Â
Automatically repeats the radio signal improving convenience and safety for the
driver.

WIN 3
WIN 3 wall-mounted transmitter compatible with EDGE series.
Combined with T10 receiver permits to add one control point for
motorized shutters, awnings or lights.
Ideal to avoid all the masonry work usually necessary to add a wired switch.

TANGO 2 SLIM / TANGO 4 SLIM
Compatible with TANGO SLIM series remote control transmitters (Old series in face out)

TECHNICAL SPECIFICATIONS EDGER4P RECEIVER

Power supply                                                              12/24 Vac/dc
Consumption in Stand-by                                             40 mA
Relay contact max capacity                                          4 A
Relay contact max voltage                                           30 Vdc
Number of outputs                                                      4
Storage codes                                                            163
Storage codes with MEM16                                           675
Protection level                                                            – – IP 44 IP 56
Working temperature                                                    -20 +55 °C

DIGITAL QUARTZ RADIO CONTROLS WITH ROLLING CODES RADIO CONTROL SYSTEMS

433MHz – 868MHz FM ROLLING CODE
2128 CODE COMBINATIONS
REMOTE TRANSMITTER MEMORISATION
RFID: WIRELESS MEMORY
AERIAL ANS400 – ANQ800-1
AVAILABLE TRANSMITTER CHANNELS 2-4-8
AVAILABLE TRANSCEIVER CHANNELS 2-4
RANGE 100 – 150 m
MORE THAN 4 BILLION PRE-CODED TRANSMITTER CODES
An extremely secure state-of-the-art radio control system with 128 bit cryptography. The system has gathered
together a series of specific appliances under a single working protocol aimed at the remote control of automatic
and security installations. Solutions for all possible uses: control of automatic installations for gates and doors,
the command and control of automatic rolling shutters and sun blinds, the activation of alarm and access control
systems as well as the activation of all ON-OFF or timer-controlled systems. Adopting the S504 – S508 system
doesn’t just offer high levels of efficiency but also provides practicality for the user and an extremely useful and
manageable appliance for the installer.
NETWORK CONNECTIVITY
The S504 – S508 range interacts with an evolved system consisting of a server dedicated to the 3G/WF connection
by means of appliances and software for computers and smart phones.

DIGITAL ROLLING CODE TRANSMITTERS 128 BIT WITH 2/4/8 CHANNELS

The transmitters, powered by a 3-volt lithium batteries (1 x CR2032) with a range of from 100 to 150 metres, are
pre-coded in the factory with a unique identification number printed on the rear so as to allow memorisation in lots
on the receiver and can be enabled without the presence of the receivers from a remote location through the use of
a second transmitter that has already been memorised in the system. They are fitted with a key-lock function which
when selected protects the appliance from any accidental activation and automatic shut down that cuts in after at
least twenty seconds of continuous activation in order to reduce battery consumption. The bidirectional transmitters
(transceivers) receive a confirmation signal allowing you to control an operation from a remote location.
QUARTZ RECEIVERS WITH THE POSSIBILITY OF MEMORISING UP TO 1000 USER CODES
The receivers are available in all the classic Cardin versions: outdoor receivers 12-24V with display, with LCD display
and 3G/WF functions in watertight cases IP55, mini receiver units to be installed in appliances which already have
a protective casing and slot-in receiver cards for direct insertion into host appliances designed to receive them. A
code and memory programming base via USB allows the transmitters to be memorised in blocks and access to the
remote memorisation function thanks the to RFID technology fitted into the transmitters.

ACCESSORIES EDGER4P RECEIVER

PRG NOIRE
Programming unit for adding/erasing transmitter codes and managing families of codes.
Complete with power supply, connecting cable to PC and software for managing codes on file.

DAMA430
Antenna for 433 MHz receivers, complete with stainless steel bracket and connection cable (3 m).