DKS1000 – KIT KEYPAD + ITERFACE 4CH

DKS1000 – KEYBOARD + INTERFACE KIT

DKS1000 – KEYBOARD + INTERFACE KIT consists of two products:
DKS1000T – BACKLITING KEYBOARD
DKS1000R – 4CH INTERFACE

DKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters.
DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

PROXIMITY COMMAND SYSTEMS

DIGITAL TRANSMISSION VIA CABLE
SURFACE-MOUNT INSTALLATION IP57
NUMBER OF USER CODES THAT CAN BE STORED: 1000
NUMBER OF AVAILABLE CODE COMBINATIONS: 1 MILLION
SEPARATE COMMAND FUNCTIONS: 4
MANAGES UP TO 3 PERIPHERAL DEVICES (KEYPADS / READERS)
BACKLIGHTING PROGRAMMING

DKS is a security system via cable ideal for commanding automatic gates and doors and access control
systems. Extremely efficient, it can be inserted into any architectural context with extreme ease and is made
up of an anti-tamper numerical key pad, a key-pad with transponder functions, a transponder reader and an
interface which is activated either by a digital code typed into the keypad, by the proximity of a Series S500
transmitter or by a transponder tag/card. All devices are connected by a shielded single wire cable.

DKS1000 or DKS1000T is a system made up of a numerical code keypad with backlighting and an interface.
The extremely compact and efficient command keypad has a case made of Zama, the key cover and sealing gaskets
are made of silicon rubber, the flush-fitting and embedding wall fastening bases are both made of Zama
and the fastening system uses personalised screws.

The DKS1000 / DKS1000R interface allows the memorisation of 1000 user codes and has
code cancellation, memorisation and memory reset functions directly on the keyboard.
It is possible to memorise up to three keyboards in a single interface module which allows you to activate
commands from different locations. You can also manage up to four contacts independently with separate
keys using impulsive ON / OFF or timer controlled relays.

Technical description

After having inserted a special enabling code it is
possible to memorise codes from a remote position without accessing the interface.
DKSTP/DKSTPM is a system made up of a transponder reader and an interface. The transponder reader
DKSTPT is compact and reliable and housed in a shockproof polycarbonate container IP57 (in a zamak
container for the DKSTPMT) with an easy to apply wall fastening base. The system allows the remote reading
of tags, transponder cards and series S500 transmitters, through the use of the interface DKS1000R which
is able to memorise up to 1000 users. It is possible to memorise up to three transponder readers in a single
interface module which allows you to activate commands from different locations.

It is possible to memorise tags directly on the reader using a Master Tag or by accessing the interface and
pressing the programming button.
The transponder in the tag is passive and therefore does not require a power supply and is only activated
when it finds itself in the transponder reader detection zone.
DKSDUAL is a multifunctional security system that unites the functions of the DKS1000 and DKSTP in
a single product. The device, in a shockproof polycarbonate IP57 container, features backlighting with
adjustable intensity automatically controlled by a light sensor and a proximity sensor.

ALTERNATIVE PRODUCTS TO BE INTEGRATED

DKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters. It is suitable for connection with
the DKS security system via a shielded unipolar wire carrying both the power supply
and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
CARHF2 system (consult the Liberté catalogue).

TRANSPONDER READER
Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).

4-CHANNEL INTERFACE DKS1000R
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).

TRANSPONDERS TAGS
TRANSPONDER TAG (WHITE)
TRANSPONDER TAG (GREY)