• DKSTP – KIT TRANSPONDER + INTERFACE

    DKSTP – KIT TRANSPONDER + INTERFACE

    DKSTP – KIT DISCONTINUED IN PHASE OUT
    REPLACED BY THE KIT: DKSTPM

    DKSTP       – TRANSPONDER + INTERFACE KIT consists of two products:
    DKSTPT     – TRANSPONDER READER
    DKS1000R – 4CH INTERFACE

    DKSTPT – TRANSPONDER READER
    Surface-mounting IP57.
    Using dip-switch settings it is possible to program the backlighting and other
    operational parameters. It is suitable for connection with the DKS security system
    via a shielded unipolar wire carrying both the power supply and the data line. Allows
    the interface to be activated by proximity reading an S500 transmitter, a TAG or a
    CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
    system (consult the Liberté catalogue).
    DKS1000R – 4 CHANNEL INTERFACE
    The interface box is easy to install and has the following features:
    – power supply 12 or 24Vac-dc;
    – 4 normally open relays (one for each channel);
    – management of up to 3 peripheral devices (keypads and/or transponder readers;
    – 1 multifunction key for the following functions: storing a code, cancelling a code,
    cancelling the entire memory content, inserting an activation code for the “remote
    memorisation” function. It is possible to store 1000 codes in memory with
    a maximum of 6 digits for each code. Each code can activate up to 4 channels
    (different functions).

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE

    DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE

    DKSTPM       – TRANSPONDER IN ZAMA + INTERFACE KIT consists of two products:
    DKSTPMT     – TRANSPONDER IN ZAMA READER
    DKS1000R     – 4CH INTERFACE

    DKSTPMT – TRANSPONDER IN ZAMA READER
    Surface-mounting IP57.
    Using dip-switch settings it is possible to program the backlighting and other
    operational parameters. It is suitable for connection with the DKS security system
    via a shielded unipolar wire carrying both the power supply and the data line. Allows
    the interface to be activated by proximity reading an S500 transmitter, a TAG or a
    CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
    system .

    DKS1000R – 4 CHANNEL INTERFACE
    The interface box is easy to install and has the following features:
    – power supply 12 or 24Vac-dc;
    – 4 normally open relays (one for each channel);
    – management of up to 3 peripheral devices (keypads and/or transponder readers;
    – 1 multifunction key for the following functions: storing a code, cancelling a code,
    cancelling the entire memory content, inserting an activation code for the “remote
    memorisation” function. It is possible to store 1000 codes in memory with
    a maximum of 6 digits for each code. Each code can activate up to 4 channels
    (different functions).

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • DKSTPMT – TRANSPONDER IN ZAMAK CASE

    DKSTPMT – TRANSPONDER READER IN ZAMAK CASE

    DKSTPMT – TRANSPONDER READER  IN ZAMAK CASE
    TRANSPONDER READER Surface-mounting IP57.
    Using dip-switch settings it is possible to program the backlighting and other
    operational parameters. It is suitable for connection with the DKS security system
    via a shielded unipolar wire carrying both the power supply and the data line. Allows
    the interface to be activated by proximity reading an S500 transmitter, a TAG or a
    CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
    system.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • DKSTPT – TRANSPONDER

    DKSTPT – TRANSPONDER READER

    DKSTPT – TRANSPONDER READER IS IN PHASE OUT
    REPLACED WITH : DKSTPMT -TRASPONDER READER IN ZAMAK CASE

    DKSTPT – TRANSPONDER READER
    The DKSTPT transponder reader is Surface-mounting IP57.
    Using dip-switch settings it is possible to program the backlighting and other
    operational parameters. It is suitable for connection with the DKS security system
    via a shielded unipolar wire carrying both the power supply and the data line. Allows
    the interface to be activated by proximity reading an S500 transmitter, a TAG or a
    CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
    system (consult the Liberté catalogue).

    DKSTPT – TRANSPONDER

    57,00 + TAX
  • DOMOPARK230E

    01

    DOMOPARK230E – ELECTROMECHANICAL PARKING SAVER

    DOMOPARK230E / DOMOPARK230 E – ELECTROMECHANICAL PARKING SAVER
    Automatic parking safe DOMOPARK230 or DOMOPARK 230E with battery and transformer
    for 230 V mains power supply.
    Works up to 4 months in total absence of power supply.
    – electronic programmer;
    – built-in NOIRE EDGE FM400 receiver “433MHz”  ROLLING CODE;
    – one S504 pre-coded two-channel transmitter;
    – buffer batteries.

    DOMOPARK230E

    875,00 + TAX
  • DOMOPARKE

    DOMOPARKE – ELECTROMECHANICAL PARKING SAVER

    DOMOPARKE / DOMOPARK E – ELECTROMECHANICAL PARKING SAFE
    Automatic DOMOPARKE parking saver with inbuilt solar panel.
    It is completely independent from the mains power supply.
    Works up to 4 months in total absence of light.
    – electronic programmer;
    – solar panel;
    – built-in NOIRE EDGE FM400 receiver “433MHz”  ROLLING CODE;
    – one NOIRE pre-coded two-channel transmitter;
    – buffer batteries;

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    DOMOPARKE

    956,00 + TAX
  • EDGE2

    EDGE2 / EDGE 2 –  REMOTE CONTROLS  TRASMITTER 433,92 MHz

    EDGE2 / EDGE 2 –  REMOTE RADIO CONTROL  TRASMITTER 433,92 MHz
    EDGE 2E Portable transmitters 2 channels.
    2-channel portable versions with code transfer function between two remote controls.
    Black casing, bi-injection molded, with rubber top.
    To have the maximum sensitivity and make the radio control indestructible.
    Soft key ring supplied.

    Compatible with TANGO SLIM series receivers (Old series in face out)

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    EDGE2

    24,00 + TAX
  • EDGE20

    EDGE20 / EDGE 20 –  REMOTE RADIO CONTROL TRASMITTER 433,92 MHz

    EDGE 20 REMOTE RADIO CONTROL 433,92 MHz
    The EDGE20 remote radio control combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
    Multichannel remote control for fast and intuitive control of 20 functions of EDGE receivers.
    Innovative and refined container with a white LED display which, placed under the semi-transparent plastic.
    Displays the selected channel.
    In the center there is a rubberized keyboard with three function keys
    and two for channel up-down.

    Equipped with practical non-slip rubber pads.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • EDGE230R4

    EDGE230R4 / EDGE 230R4  RECEIVER 433,92 MHz

    EDGE230R4 / EDGE 230R4 RECEIVER
    The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
    The refined design, sober and essential assures the maximum ergonomic comfort.
    Edge range combines the simplicity of the fixed code to an excellent transmission range.
    Special functions: self learning codes and possibility to copy codes
    directly between transmitters.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    EDGE230R4

    89,00 + TAX
  • EDGE4

    EDGE4 / EDGE 4 –  REMOTE RADIO CONTROL TRASMITTER 433,92 MHz

    EDGE4 / EDGE 4 –  REMOTE RADIO CONTROL  TRASMITTER 433,92 MHz
    EDGE 4 Portable transmitters 4 channels.
    4-channel portable versions with code transfer function between two remote controls.
    Black casing, bi-injection molded, with rubber top.
    To have the maximum sensitivity and make the radio control indestructible.
    Soft key ring supplied.

    Compatible with TANGO SLIM series receivers (Old series in face out)

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    EDGE4

    26,00 + TAX
  • EDGEOC2

    EDGEOC2 / EDGE OC2  RECEIVER 433,92 MHz

    EDGEOC2 / EDGE OC2 RECEIVER
    The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
    The refined design, sober and essential assures the maximum ergonomic comfort.
    Edge range combines the simplicity of the fixed code to an excellent transmission range.
    Special functions: self learning codes and possibility to copy codes
    directly between transmitters.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    33,0037,00 + TAX

    EDGEOC2

    33,0037,00 + TAX
  • EDGER4P

    EDGER4P RECEIVER 433,92 MHz

    EDGER4P / EDGE R4P RECEIVER
    The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
    The refined design, sober and essential assures the maximum ergonomic comfort.
    Edge range combines the simplicity of the fixed code to an excellent transmission range.
    Special functions: self learning codes and possibility to copy codes directly between transmitters.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    EDGER4P

    88,00 + TAX

Main Menu