-
DKSTP – KIT TRANSPONDER + INTERFACE
DKSTP – KIT TRANSPONDER + INTERFACE
DKSTP – KIT DISCONTINUED IN PHASE OUT
REPLACED BY THE KIT: DKSTPMDKSTP – TRANSPONDER + INTERFACE KIT consists of two products:
DKSTPT – TRANSPONDER READER
DKS1000R – 4CH INTERFACEDKSTPT – TRANSPONDER READER
Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).
DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
DKS1000 – KIT KEYPAD + ITERFACE 4CH
DKS1000 – KEYBOARD + INTERFACE KIT
DKS1000 – KEYBOARD + INTERFACE KIT consists of two products:
DKS1000T – BACKLIT KEYBOARD
DKS1000R – 4CH INTERFACEDKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters.
DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€106,00 + TAXDKS1000 – KIT KEYPAD + ITERFACE 4CH
€106,00 + TAX -
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER FUNCTION
The DKSDUALT – KEYPAD WITH TRANSPONDER is Surface-mounting IP57.
The DKSDUALT device has the following features:
– 12 keys with backlighting;
– backlighting controlled by the proximity sensor.
Allows the interface to be activated by either typing in a code or by proximity
reading an S500 transmitter, a TAG or a CARD.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€91,00 + TAXDKSDUALT – KEYPAD WITH TRANSPONDER
€91,00 + TAX -
DKSTPT – TRANSPONDER
DKSTPT – TRANSPONDER READER
DKSTPT – TRANSPONDER READER IS IN PHASE OUT
REPLACED WITH : DKSTPMT -TRASPONDER READER IN ZAMAK CASEDKSTPT – TRANSPONDER READER
The DKSTPT transponder reader is Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).€57,00 + TAXDKSTPT – TRANSPONDER
€57,00 + TAX -
DKS1000R – INTERFACE 4CH
DKS1000R – INTERFACE 4CH
DKS1000R 4-CHANNEL INTERFACE
The interface 4CH DKS1000R box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€37,00 + TAXDKS1000R – INTERFACE 4CH
€37,00 + TAX -
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters. It is suitable for connection with
the DKS security system via a shielded unipolar wire carrying both the power supply
and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
CARHF2 system (consult the Liberté catalogue).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€86,00 + TAXDKS1000T – KEYPAD WITH BACKLIGHTING
€86,00 + TAX -
INTBTC4 – BLUETOOTH INTERFACE
INTBTC4 – BLUETOOTH INTERFACE IN BOX (12 / 24Vac-dc).
INTBTC4 – BLUETOOTH INTERFACE WITH FOUR RELAYS
The interface with a Bluetooth module allows the control of four relays
with NO or NC contacts. The selection dip-switches (one block per
relay) allow you to select the relay’s activation method: impulsive, ON/
OFF, timer controlled or remotely controlled relay activation using the
programming calender in the Cardin multiprotocol interface Cardin
RCQ504/508W00. The programming buttons (one per relay) allow
you to set the activation times for the relays (from 1 s to 5 min) for
the timer controlled mode.
The Bluetooth module MODBT is to be ordered separately.
Power supply 12/24Vac-dc.
Electrical input 50mA.
Overall dimensions 95 x 75 x 25.
Indoor box IP20If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€60,00 + TAXINTBTC4 – BLUETOOTH INTERFACE
€60,00 + TAX -
RPQ508T10 RADIOPROGRAMMERS SUN BLINDS AWNINGS
RPQ508T10 – 868MHz RADIOPROGRAMMERS SUN BLINDS AWNINGS (400W)
RPQ508T10 – 868MHz RADIOPROGRAMMERS FOR ROLLING SHUTTERS, SUN BLINDS
AND AWNINGS (230V-1000W)
Logic integrated into the receiver with work time management and output
for the control of one motor. Suitable for the command of automatic rolling
shutters, sun blinds and awnings. Inputs for one opening and one closing
command via cable. Manual operation in either the opening/closing or only
closing direction.
ndoor box IP20.
Overall dimensions 106 x 36 x 21.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€64,00 + TAXRPQ508T10 RADIOPROGRAMMERS SUN BLINDS AWNINGS
€64,00 + TAX -
RPQ504T10 RADIOPROGRAMMERS SUN BLINDS AWNINGS
RPQ504T10 – 433MHz RADIOPROGRAMMERS SUN BLINDS AWNINGS (400W)
RPQ504T10 – 433MHz RADIOPROGRAMMER FOR ROLLING SHUTTERS, SUN BLINDS
AND AWNINGS (230V-1000W)
Logic integrated into the receiver with work time management and output
for the control of one motor. Suitable for the command of automatic rolling
shutters, sun blinds and awnings. Inputs for one opening and one closing
command via cable. Manual operation in either the opening/closing or only
closing direction.
ndoor box IP20.
Overall dimensions 106 x 36 x 21.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€64,00 + TAXRPQ504T10 RADIOPROGRAMMERS SUN BLINDS AWNINGS
€64,00 + TAX -
RPQ508RNA0 RADIOPROGRAMMERS SHUTTER AWNING
RPQ508RNA0 – 868MHz RADIOPROGRAMMERS SHUTTER AWNING (400W)
RPQ508RNA0 – 868MHz RADIOPROGRAMMERS FOR ROLLING SHUTTER / AWNING (400 W)
The radio programmer allows the remote control of one single
phase motor and finds its best use in the command of automatic
rolling shutters and awnings. The appliance is designed for the
connection of an anemometer (see chapter COMMAND AND SAFETY DEVICES).
Indoor box IP43.
Power supply 230Vac.
Overall dimensions 120 x 85 x 20If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€87,00 + TAXRPQ508RNA0 RADIOPROGRAMMERS SHUTTER AWNING
€87,00 + TAX -
RPQ504RNA0 RADIOPROGRAMMERS SHUTTERS AWNINGS
RPQ504RNA0 – 433MHz RADIOPROGRAMMERS SHUTTERS AWNINGS (400W)
RPQ504RNA0 -433MHz RADIOPROGRAMMERS FOR ROLLING SHUTTERS / AWNINGS (400 W)
The radio programmer allows the remote control of one single
phase motor and finds its best use in the command of automatic
rolling shutters and awnings. The appliance is designed for the
connection of an anemometer (see chapter COMMAND AND SAFETY DEVICES).
Indoor box IP43.
Power supply 230Vac.
Overall dimensions 120 x 85 x 20If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€87,00 + TAXRPQ504RNA0 RADIOPROGRAMMERS SHUTTERS AWNINGS
€87,00 + TAX -
RPQ508IT0 RADIO PROGRAMMER ON/OFF
RPQ508IT0 – 868MHz RADIO PROGRAMMER ON/OFF + TIMER (230V-2000W)
RPQ508IT0 – 868MHz RADIO PROGRAMMER ON/OFF + TIMER (2000W)
For specific uses such as the remote control of external (gardens) and
internal lighting; the remote control of power sockets. Connecting the
radioprogrammer to a light detection device will prevent it from switching
on the lighting system during the daytime.Possibility of memorising up to
1000 user codes. Timer settings: from 1 min. to 23 hrs. 59 min.
All weather box in ABS – IP55.
Overall dimensions 139 x 115 x 44.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€82,00 + TAXRPQ508IT0 RADIO PROGRAMMER ON/OFF
€82,00 + TAX