-
SLX1524CB
SLX1524CB / SLX1524 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX1524CB AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 1500KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX1524CB motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger (SLX824CB – SLX1524CB);
– NiMH batteries (SLX824CB – SLX1524CB);
– reversible motor (SLX1024REV).The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€642,00 + TAXSLX1524CB
€642,00 + TAX -
SLX3024CB
SLX3024CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX3024CB MOTOR – FAST SELF-LOCKING UNIT ENCODER 24V MAX. 3000KG + NIMH BATTERIES FOR SLIDING GATE
The SLX3024CB motor for sliding gate automation is made up of a self-locking gear motor controlled
by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.
The SLX3024CB MOTOR electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).
The events can be enabled or disabled (during holiday periods) either
from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual knob
operated release system protected by a robust access door with
a personalised key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€786,00 + TAXSLX3024CB
€786,00 + TAX -
SLX24DRACO
SLX24DRACO – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX24DRACO MOTOR – FAST SELF-LOCKING UNIT ENCODER 24V FOR SLIDING GATE MAX. 1000KG + NIMH BATTERIES
The SLX24DRACO motor for sliding gate automation is made up of a self-locking gear motor controlled
by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
The innovative SLX24DRACO system permits the gate’s movement to
be accompanied with total security and features a “variable speed
function” which can be adjusted according to the different installation
requirements up to a maximum speed of 30m per minute.The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.
The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day. The appliance is fitted with a safe and
secure lever operated manual release system protected by a robust
access door with a personalised key.€870,00 + TAXSLX24DRACO
€870,00 + TAX -
BL3924MRCB
BL3924MRCB MASTER- ELECTROMECHANICAL GROUP WITH 24V REVERSIBLE
BL3924MRCB MASTER – SELF-LOCKING GROUP WITH HINGED ARMS FOR SWING GATES WITH ENCODER 24V MAX. 400KG + NIMH BATTERIES
BL3924MRCB MASTER Encoder-controlled self-locking Master unit with hinged arms for swing gates including:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.
Particularly suited for installations with large size columns where the
hinges are not aligned to the edge of the column and with gate
leaves of up to 3,5 metres in length (up to 5m with a hinged arm
and an electric lock) 400kg maximum weight.
Manual release is carried out using the supplied hexagonal key after
first unlocking and removing the covering cap.
Operator arm to be ordered separately.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€630,00 + TAXBL3924MRCB
€630,00 + TAX -
BL824S
BL824S – ELECTROMECHANICAL GROUP WITH 24V MOTOR SLAVE
BL824S – MOTOR IS IN PHASE OUT
REPLASED WITH MOTOR : BLGRIFFE24SBL824S MOTOR – SELF-LOCKING GROUP SLAVE WITH ENCODER 24V MAX. 200KG
BL824S MOTOR SLAVE Encoder-controlled self-locking Master unit for swing gate including:
– electronic programmer;
– 433MHz FM receiver;
Particularly suited for installations with narrow columns that require
the mounting base to be less than 150mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with a hinged
arm and an electric lock) 200kg maximum weight.
Manual release is carried out using the hexagonal key located inside
the side panel.
Operator arm to be ordered separately.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
BLTOW24M
BLTOW24M MASTER- ELECTROMECHANICAL GROUP WITH 24V MOTOR
BLTOW24M MOTOR IN PHASE OUT –
REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TMBLTOW24M MASTER – SELF-LOCKING GROUP WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES(optional)
BLTOW24M MASTER Encoder-controlled self-locking Master unit for swing gate with hinged arms including:
– electronic programmer;
– 433MHz FM receiver;
– gate movement signalling via led (optional).
Kit battery charger + batteries to be ordered separately.
Particularly suited for installations with narrow columns that require
the mounting base to be less than 180mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with an
electric lock), 200kg maximum weight.
Manual release is carried out using a practical locking – unlocking
lever protected by a security key.
Operator arm included.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
BLTOW24S
BLTOW24S SLAVE- ELECTROMECHANICAL GROUP WITH 24V MOTOR
BLTOW24S MOTOR IN PHASE OUT –
REPLACED WITH MOTOR : BLGRIFFE24SBLTOW24S SLAVE – SELF-LOCKING GROUP WITH ENCODER 24V MAX. 200KG
BLTOW24S SLAVE Encoder-controlled self-locking Slave unit for swing gate with hinged arms including:
– electronic programmer;
– 433MHz FM receiver;
– gate movement signalling via led (optional).
Kit battery charger + batteries to be ordered separately.
Particularly suited for installations with narrow columns that require
the mounting base to be less than 180mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with an
electric lock), 200kg maximum weight.
Manual release is carried out using a practical locking – unlocking
lever protected by a security key.
Operator arm included.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
BL3924MCB
BL3924MCB MASTER- ELECTROMECHANICAL GROUP WITH 24V IRREVERSIBLE
BL3924MCB MASTER – SELF-LOCKING GROUP WITH HINGED ARMS FOR SWING GATES WITH ENCODER 24V MAX. 400KG + NIMH BATTERIES
BL3924MCB MOTOR MASTER Encoder-controlled self-locking Master unit with hinged arms for swing gates (reversible in the version BL3924MRCB) including:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.
Particularly suited for installations with large size columns where the
hinges are not aligned to the edge of the column and with gate
leaves of up to 3,5 metres in length (up to 5m with a hinged arm
and an electric lock) 400kg maximum weight.
Manual release is carried out using the supplied hexagonal key after
first unlocking and removing the covering cap.
Operator arm to be ordered separately.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€642,00 + TAXBL3924MCB
€642,00 + TAX -
BL3924SR
BL3924SR SLAVE- ELECTROMECHANICAL GROUP WITH 24V REVERSIBLE
BL3924SR SLAVE – SELF-LOCKING GROUP WITH HINGED ARMS FOR SWING GATES WITH ENCODER 24V MAX. 400KG + NIMH BATTERIES
BL3924SR SLAVE Encoder-controlled self-locking Master unit with hinged arms for swing gates including:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.
Particularly suited for installations with large size columns where the
hinges are not aligned to the edge of the column and with gate
leaves of up to 3,5 metres in length (up to 5m with a hinged arm
and an electric lock) 400kg maximum weight.
Manual release is carried out using the supplied hexagonal key after
first unlocking and removing the covering cap.
Operator arm to be ordered separately.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€396,00 + TAXBL3924SR
€396,00 + TAX -
BL3924S
BL3924S SLAVE- ELECTROMECHANICAL GROUP WITH 24V IRREVERSIBLE
BL3924S SLAVE – SELF-LOCKING GROUP WITH HINGED ARMS FOR SWING GATES WITH ENCODER 24V MAX. 400KG + NIMH BATTERIES
BL3924S SLAVE Encoder-controlled self-locking Master unit with hinged arms for swing gates including:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.
Particularly suited for installations with large size columns where the
hinges are not aligned to the edge of the column and with gate
leaves of up to 3,5 metres in length (up to 5m with a hinged arm
and an electric lock) 400kg maximum weight.
Manual release is carried out using the supplied hexagonal key after
first unlocking and removing the covering cap.
Operator arm to be ordered separately.€414,00 + TAXBL3924S
€414,00 + TAX -
BL1924ASW
BL1924ASW DX – HINGED ARM AUTOMATION FOR
SWING GATE DX(RIGHT HAND) 24V MOTORBL1924ASW MOTOR IS IN PHASE OUT –
REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TMBL1924ASW DX – HINGED ARM AUTOMATION FOR SWING DOOR DX(RIGHT HAND) WITH
ENCODER 24V PESO MAX. 150KG AND 2M
BL1924ASW DX: RIGHT-HAND OPERATOR UNIT WITH A 24V MOTOR
Self-locking encoder-controlled operator:
– operator arm included;
– ECU to be ordered separately.BL1924ASW DX Operational constraints:
The equipment BL1924ASW DX is particularly suitable for gates
with pillars large with internal hinges with respect to the pillar line.
Ideal also for gates with leaves up to 2 meters in length, max. 150kg.
The manual release takes place after the key door has been removed using the supplied key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
BL1924LSW
BL1924LSW SX – HINGED ARM AUTOMATION FOR
SWING GATES SX(LEFT HAND) 24V MOTORBL1924LSW MOTOR IS IN PHASE OUT –
REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TMBL1924LSW SX – HINGED ARM AUTOMATION FOR SWING GATES DX(RIGHT HAND) WITH
ENCODER 24V PESO MAX. 150KG AND 2M
BL1924LSW SX : LEFT-HAND OPERATOR UNIT WITH A 24V MOTOR
Self-locking encoder-controlled operator:
– operator arm included;
– ECU to be ordered separately.Operational constraints:
The equipment BL1924LSW is particularly suitable for gates
with pillars large with internal hinges with respect to the pillar line.
Ideal also for gates with leaves up to 2 meters in length, max. 150kg.
The manual release takes place after the key door has been removed using the supplied key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount