• BL824MCB

    BL824MCB MASTER- ELECTROMECHANICAL GROUP WITH 24V MOTOR

    BL824-MCB – MOTOR IS IN PHASE OUT
    REPLASED WITH MOTOR : BLGRIFFE24M

     BL824MCB MOTOR SELF-LOCKING GROUP MASTER WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES FOR SWING GATE WITH HINGED ARM

     BL824MCB MOTOR MASTER Encoder-controlled self-locking Master unit including:
    – electronic programmer;
    – 433MHz FM receiver;
    – slot-in battery charger;
    – NiMH batteries.
    Particularly suited for installations with narrow columns that require
    the mounting base to be less than 150mm in width and also for
    gates where the hinges are not aligned to the edge of the column
    and with gate leaves of up to 2 metres in length (2,5m with a hinged
    arm and an electric lock) 200kg maximum weight.
    Manual release is carried out using the hexagonal key located inside
    the side panel.
    Operator arm to be ordered separately.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    BL824MCB

    582,00 + TAX
  • SLX824CB

    SLX824CB  / SLX824 CB ELECTROMECHANICAL UNIT WITH A 24V MOTOR

    SLX824CB  AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 800KG + NIMH BATTERIES FOR SLIDING AUTOMATION
    The SLX824CB  motor for sliding automation gate is made up of a self-locking gear motor (with a gate
    drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
    – electronic programmer;
    – 433MHz FM receiver;
    – slot-in battery charger (SLX824CB – SLX1524CB);
    – NiMH batteries (SLX824CB – SLX1524CB);

    The electronic programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to rapidly set the system parameters including:
    the sequential button mode, automatic reclosing, warning lamp
    pre-flashing, intermittent warning lamp activation, indicator light and
    photoelectric cell function setting etc.

    The electronics card, thanks to the presence of the real-time clock,
    allows you to set 10 events (shown on the display) and these events
    permit you to regulate the opening and closing of the motor at
    different times during the day within 3 weekly time bands (Mon-
    Fri, Sat-Sun, Mon-Sun).

    The events can be enabled or disabled (during holiday periods)
    either from the menu or by means of a radio channel.
    The appliance is fitted with a safe and secure manual
    release system activated by a personalised key.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    SLX824CB

    600,00 + TAX
  • BL3924MRCB

    BL3924MRCB MASTER- ELECTROMECHANICAL GROUP WITH 24V REVERSIBLE

    BL3924MRCB MASTER – SELF-LOCKING GROUP WITH HINGED ARMS FOR SWING GATES WITH ENCODER 24V MAX. 400KG + NIMH BATTERIES

    BL3924MRCB MASTER Encoder-controlled self-locking Master unit with hinged arms for swing gates including:
    – electronic programmer;
    – 433MHz FM receiver;
    – slot-in battery charger;
    – NiMH batteries.
    Particularly suited for installations with large size columns where the
    hinges are not aligned to the edge of the column and with gate
    leaves of up to 3,5 metres in length (up to 5m with a hinged arm
    and an electric lock) 400kg maximum weight.
    Manual release is carried out using the supplied hexagonal key after
    first unlocking and removing the covering cap.
    Operator arm to be ordered separately.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    BL3924MRCB

    630,00 + TAX
  • BL3924MCB

    BL3924MCB MASTER- ELECTROMECHANICAL GROUP WITH 24V IRREVERSIBLE

    BL3924MCB MASTER – SELF-LOCKING GROUP WITH HINGED ARMS FOR SWING GATES WITH ENCODER 24V MAX. 400KG + NIMH BATTERIES

    BL3924MCB MOTOR MASTER Encoder-controlled self-locking Master unit with hinged arms for swing gates (reversible in the version BL3924MRCB) including:
    – electronic programmer;
    – 433MHz FM receiver;
    – slot-in battery charger;
    – NiMH batteries.
    Particularly suited for installations with large size columns where the
    hinges are not aligned to the edge of the column and with gate
    leaves of up to 3,5 metres in length (up to 5m with a hinged arm
    and an electric lock) 400kg maximum weight.
    Manual release is carried out using the supplied hexagonal key after
    first unlocking and removing the covering cap.
    Operator arm to be ordered separately.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    BL3924MCB

    642,00 + TAX
  • SLX1524CB

    SLX1524CB  / SLX1524 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR

    SLX1524CB  AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 1500KG + NIMH BATTERIES FOR SLIDING AUTOMATION

    The SLX1524CB  motor for sliding automation gate is made up of a self-locking gear motor (with a gate
    drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
    – electronic programmer;
    – 433MHz FM receiver;
    – slot-in battery charger (SLX824CB – SLX1524CB);
    – NiMH batteries (SLX824CB – SLX1524CB);
    – reversible motor (SLX1024REV).

    The electronic programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to rapidly set the system parameters including:
    the sequential button mode, automatic reclosing, warning lamp
    pre-flashing, intermittent warning lamp activation, indicator light and
    photoelectric cell function setting etc.

    The electronics card, thanks to the presence of the real-time clock,
    allows you to set 10 events (shown on the display) and these events
    permit you to regulate the opening and closing of the motor at
    different times during the day within 3 weekly time bands (Mon-
    Fri, Sat-Sun, Mon-Sun).

    The events can be enabled or disabled (during holiday periods)
    either from the menu or by means of a radio channel.
    The appliance is fitted with a safe and secure manual
    release system activated by a personalised key.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    SLX1524CB

    642,00 + TAX
  • KT-BL TAG

    KT-BL TAG – 24VDC ELECTROMECHANICAL MOTOR FOR SWING GATES

    KT-BL TAG KIT COMPLETE ELETTROMECHANICAL 24V MOTOR FOR SWING GATES 2M 150KG
    These KIT electromechanical rams KT-BL TAG with 24Vdc motors suitable for small residential
    installations with two swing gate leaves or one pedestrian gate are easy to fit
    without requiring brickwork and offer excellent service with regard to the number
    of manoeuvres.

    KT-BL TAG USING
    Worm screw automation for gates with a maximum length of 2m, maximum
    weight 150kg.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    KT-BL TAG

    672,00 + TAX
  • KIT TAG

    KIT TAG – ELECTROMECHANICAL PISTON 24V FOR SWING GATES

    KIT TAG N  – ELECTROMECHANICAL PISTON 24V FOR SWING GATES
    The Kit with two 24 V electromechanical actuators ideal for residential swing gates up to 2 meters.
    Equipped with encoder and key release with micro switch.
    Safe and Precise thanks to the encoder and the slowing down in opening and closing.
    Practical thanks to the control unit with plug-in receiver and self-learning function.
    Reliable because it is entirely made out of quality materials as aluminum, stainless steel and techno

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    KIT TAG

    672,00 + TAX
  • KT-BLGRIFFE24T MOTOR KIT

    KT-BLGRIFFE24T – KIT BLGRIFFE24TMELECTROMECHANICAL GROUP WITH 24V MOTOR

    BLGRIFFE24TM MASTER SELF-LOCKING GROUP MOTOR WITH MECHANICAL LIMIT SWITCH 24V MAX. 200KG + NIMH BATTERIES(optional)
    BLGRIFFE24TM MASTER Encoder-controlled self-locking Master unit for swing gate with hinged arms including:
    – electronic programmer;
    – 433MHz FM receiver;
    – Operator hinged arm included.
    Kit battery charger + batteries to be ordered separately.

    KIT CONTENTS :  KT-BLGRIFFE24T

    BLGRIFFE24M – MASTER SELF-LOCKING GROUP
    with 24V motor controlled by encoder, programmer electronic,
    433MHz FM receiver, battery charger and NiMH batteries.

    BLGRIFFE24S – SLAVE SELF-LOCKING GROUP
    to automate the second door.

    ICON – LED FLASHING LIGHT 24V – 230V
    with built-in antenna.

    RSQ504OC2 – 2 CHANNEL RECEIVER OPEN COLLECTOR
    DUAL-CHANNEL CARD RECEIVER plug-in open collector 433MHz.
    Versions for the S508 – S486 – S449 and EDGE series are available on request.

    TXQ504C4 – 2 4-FUNCTION TRANSMITTERS
    433MHz FM ROLLING CODE.

    CDR999 – PAIR OF SURFACE PHOTOCELLS
    in class 3 with adjustable optics, 10m range.

    CABPC10 – 10m CONNECTION CABLE
    with pre-insulated end tubes.

    PLATE-INT  – INTERNATIONAL WARNING PLATE
    in multilingual PP.

    KT-BLGRIFFE24T MOTOR KIT

    685,00 + TAX
  • EVO 2000

    EVO2000 / EVO 2000  : OILBATH GEAR MOTOR FOR SLIDING GATES

    EVO 2000 /EVO2000 : OILBATH GEAR MOTOR FOR SLIDING GATE 2000Kg 230V 400V  THREE-PHASE
    Electromechanical gearmotor in oilbath ideal for industrial sliding gates up to 2000 Kg.
    Complete with encoder, magnetic limits and built built-in control unit.
    Safe and Precise thanks to the encoder and the slowing down in opening and closing.
    Practical thanks to the control unit with plug-in receiver and self-learning function.
    Versatile fixing plate with adjustable height and depth.
    Reliable with a sturdy aluminum base treated against oxidation and all moving parts in oilbath.
    Constant performance over time and in any condition thanks to reduced wear&tear
    and the possibility to maintain the oil at the ideal temperature using HOT (optional).
    Manual release with coded lock.

    EVO 2000
    230 V electromeccanical gearmotor in oil bath.
    For industrial sliding gates up to 2000kg.
    Oil bath lubrication.

  • SLX3024

    SLX3024 – SLX 3024 –  ELECTROMECHANICAL UNIT WITH A 24V MOTOR

    SLX3024 MOTOR – FAST SELF-LOCKING UNIT ENCODER 24V MAX. 3000KG FOR SLIDING GATES

    The SLX3024 motor for sliding gates automation is made up of a self-locking gear motor controlled
    by magnetic encoder with an in-built:
    – electronic programmer;
    – 433MHz FM receiver;

    The  SLX3024  MOTOR electronic programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to rapidly set the system parameters including:
    the sequential button mode, automatic reclosing, warning lamp
    pre-flashing, intermittent warning lamp activation, indicator light and
    photoelectric cell function setting etc.

    The electronics card, thanks to the presence of the real-time clock,
    allows you to set 10 events (shown on the display) and these events
    permit you to regulate the opening and closing of the motor at
    different times during the day within 3 weekly time bands (Mon-
    Fri, Sat-Sun, Mon-Sun).
    The events can be enabled or disabled (during holiday periods) either
    from the menu or by means of a radio channel.
    The appliance is fitted with a safe and secure manual knob
    operated release system protected by a robust access door with
    a personalised key.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    SLX3024

    720,00 + TAX
  • SLX1224REV

    SLX1224REV / SLX1224 REV – ELECTROMECHANICAL UNIT WITH A 24V MOTOR

    SLX1224REV  AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 1200KG + NIMH BATTERIES FOR SLIDING AUTOMATION

    The SLX1024REV motor for sliding automation gate is made up of a self-locking gear motor (with a gate drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
    – electronic programmer;
    – 433MHz FM receiver;
    – slot-in battery charger (SLX824CB – SLX1524CB);
    – NiMH batteries (SLX824CB – SLX1524CB);
    – reversible motor (SLX1224REV).

    The electronic programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to rapidly set the system parameters including:
    the sequential button mode, automatic reclosing, warning lamp
    pre-flashing, intermittent warning lamp activation, indicator light and
    photoelectric cell function setting etc.

    The electronics card, thanks to the presence of the real-time clock,
    allows you to set 10 events (shown on the display) and these events
    permit you to regulate the opening and closing of the motor at
    different times during the day within 3 weekly time bands (Mon-
    Fri, Sat-Sun, Mon-Sun).

    The events can be enabled or disabled (during holiday periods)
    either from the menu or by means of a radio channel.
    The appliance is fitted with a safe and secure manual
    release system activated by a personalised key.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    SLX1224REV

    732,00 + TAX
  • KT-BLGRIFFE24 MOTOR KIT

    KT-BLGRIFFE24 – KIT BLGRIFFE24MELECTROMECHANICAL GROUP WITH 24V MOTOR

    BLGRIFFE24M MASTER SELF-LOCKING GROUP MOTOR WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES(optional)
    BLGRIFFE24M MASTER Encoder-controlled self-locking Master unit for swing gate with hinged arms including:
    – electronic programmer;
    – 433MHz FM receiver;
    – Operator hinged arm included.
    Kit battery charger + batteries to be ordered separately.

    KIT CONTENTS :  KT-BLGRIFFE24

    BLGRIFFE24M – MASTER SELF-LOCKING GROUP
    with 24V motor controlled by encoder, programmer electronic,
    433MHz FM receiver, battery charger and NiMH batteries.

    BLGRIFFE24S – SLAVE SELF-LOCKING GROUP
    to automate the second door.

    ICON – LED FLASHING LIGHT 24V – 230V
    with built-in antenna.

    TXQ504C4 – 2 4-FUNCTION TRANSMITTERS
    433MHz FM ROLLING CODE.

    CDR999 – PAIR OF SURFACE PHOTOCELLS
    in class 3 with adjustable optics, 10m range.

    CABPC10 – 10m CONNECTION CABLE
    with pre-insulated end tubes.

    PLATE-INT  – INTERNATIONAL WARNING PLATE
    in multilingual PP.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    KT-BLGRIFFE24 MOTOR KIT

    745,00 + TAX

Main Menu