• SLX3024CB

    SLX3024CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR

    SLX3024CB MOTOR – FAST SELF-LOCKING UNIT ENCODER 24V MAX. 3000KG + NIMH BATTERIES FOR SLIDING GATE

    The SLX3024CB motor for sliding gate automation is made up of a self-locking gear motor controlled
    by magnetic encoder with an in-built:
    – electronic programmer;
    – 433MHz FM receiver;
    – slot-in battery charger;
    – NiMH batteries.
    The  SLX3024CB  MOTOR electronic programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to rapidly set the system parameters including:
    the sequential button mode, automatic reclosing, warning lamp
    pre-flashing, intermittent warning lamp activation, indicator light and
    photoelectric cell function setting etc.

    The electronics card, thanks to the presence of the real-time clock,
    allows you to set 10 events (shown on the display) and these events
    permit you to regulate the opening and closing of the motor at
    different times during the day within 3 weekly time bands (Mon-
    Fri, Sat-Sun, Mon-Sun).
    The events can be enabled or disabled (during holiday periods) either
    from the menu or by means of a radio channel.
    The appliance is fitted with a safe and secure manual knob
    operated release system protected by a robust access door with
    a personalised key.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    SLX3024CB

    786,00 + TAX
  • SLX24DRACO

    SLX24DRACO – ELECTROMECHANICAL UNIT WITH A 24V MOTOR

    SLX24DRACO  MOTOR – FAST SELF-LOCKING UNIT ENCODER 24V FOR SLIDING GATE MAX. 1000KG + NIMH BATTERIES

    The SLX24DRACO motor for sliding gate automation is made up of a self-locking gear motor controlled
    by magnetic encoder with an in-built:
    – electronic programmer;
    – 433MHz FM receiver;
    The innovative SLX24DRACO system permits the gate’s movement to
    be accompanied with total security and features a “variable speed
    function” which can be adjusted according to the different installation
    requirements up to a maximum speed of 30m per minute.

    The electronic programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to rapidly set the system parameters including:
    the sequential button mode, automatic reclosing, warning lamp
    pre-flashing, intermittent warning lamp activation, indicator light and
    photoelectric cell function setting etc.
    The electronics card, thanks to the presence of the real-time clock,
    allows you to set 10 events (shown on the display) and these events
    permit you to regulate the opening and closing of the motor at
    different times during the day. The appliance is fitted with a safe and
    secure lever operated manual release system protected by a robust
    access door with a personalised key.

    SLX24DRACO

    870,00 + TAX
  • BL3924MRCB

    BL3924MRCB MASTER- ELECTROMECHANICAL GROUP WITH 24V REVERSIBLE

    BL3924MRCB MASTER – SELF-LOCKING GROUP WITH HINGED ARMS FOR SWING GATES WITH ENCODER 24V MAX. 400KG + NIMH BATTERIES

    BL3924MRCB MASTER Encoder-controlled self-locking Master unit with hinged arms for swing gates including:
    – electronic programmer;
    – 433MHz FM receiver;
    – slot-in battery charger;
    – NiMH batteries.
    Particularly suited for installations with large size columns where the
    hinges are not aligned to the edge of the column and with gate
    leaves of up to 3,5 metres in length (up to 5m with a hinged arm
    and an electric lock) 400kg maximum weight.
    Manual release is carried out using the supplied hexagonal key after
    first unlocking and removing the covering cap.
    Operator arm to be ordered separately.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    BL3924MRCB

    630,00 + TAX
  • BL824S

    BL824S – ELECTROMECHANICAL GROUP WITH 24V MOTOR SLAVE

    BL824S – MOTOR IS IN PHASE OUT
    REPLASED WITH MOTOR : BLGRIFFE24S

     BL824S MOTOR SELF-LOCKING GROUP SLAVE WITH ENCODER 24V MAX. 200KG
     BL824S MOTOR SLAVE Encoder-controlled self-locking Master unit for swing gate  including:
    – electronic programmer;
    – 433MHz FM receiver;
    Particularly suited for installations with narrow columns that require
    the mounting base to be less than 150mm in width and also for
    gates where the hinges are not aligned to the edge of the column
    and with gate leaves of up to 2 metres in length (2,5m with a hinged
    arm and an electric lock) 200kg maximum weight.
    Manual release is carried out using the hexagonal key located inside
    the side panel.
    Operator arm to be ordered separately.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • BLTOW24M

    BLTOW24M MASTER- ELECTROMECHANICAL GROUP WITH 24V MOTOR

    BLTOW24M MOTOR IN PHASE OUT –
    REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TM

    BLTOW24M MASTER SELF-LOCKING GROUP WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES(optional)

    BLTOW24M MASTER Encoder-controlled self-locking Master unit for swing gate with hinged arms including:
    – electronic programmer;
    – 433MHz FM receiver;
    – gate movement signalling via led (optional).
    Kit battery charger + batteries to be ordered separately.
    Particularly suited for installations with narrow columns that require
    the mounting base to be less than 180mm in width and also for
    gates where the hinges are not aligned to the edge of the column
    and with gate leaves of up to 2 metres in length (2,5m with an
    electric lock), 200kg maximum weight.
    Manual release is carried out using a practical locking – unlocking
    lever protected by a security key.
    Operator arm included.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • BLTOW24S

    BLTOW24S SLAVE- ELECTROMECHANICAL GROUP WITH 24V MOTOR

    BLTOW24S MOTOR IN PHASE OUT –
    REPLACED WITH MOTOR : BLGRIFFE24S

    BLTOW24S SLAVE SELF-LOCKING GROUP WITH ENCODER 24V MAX. 200KG

    BLTOW24S SLAVE Encoder-controlled self-locking Slave unit for swing gate with hinged arms including:
    – electronic programmer;
    – 433MHz FM receiver;
    – gate movement signalling via led (optional).
    Kit battery charger + batteries to be ordered separately.
    Particularly suited for installations with narrow columns that require
    the mounting base to be less than 180mm in width and also for
    gates where the hinges are not aligned to the edge of the column
    and with gate leaves of up to 2 metres in length (2,5m with an
    electric lock), 200kg maximum weight.
    Manual release is carried out using a practical locking – unlocking
    lever protected by a security key.
    Operator arm included.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • BL3924MCB

    BL3924MCB MASTER- ELECTROMECHANICAL GROUP WITH 24V IRREVERSIBLE

    BL3924MCB MASTER – SELF-LOCKING GROUP WITH HINGED ARMS FOR SWING GATES WITH ENCODER 24V MAX. 400KG + NIMH BATTERIES

    BL3924MCB MOTOR MASTER Encoder-controlled self-locking Master unit with hinged arms for swing gates (reversible in the version BL3924MRCB) including:
    – electronic programmer;
    – 433MHz FM receiver;
    – slot-in battery charger;
    – NiMH batteries.
    Particularly suited for installations with large size columns where the
    hinges are not aligned to the edge of the column and with gate
    leaves of up to 3,5 metres in length (up to 5m with a hinged arm
    and an electric lock) 400kg maximum weight.
    Manual release is carried out using the supplied hexagonal key after
    first unlocking and removing the covering cap.
    Operator arm to be ordered separately.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    BL3924MCB

    642,00 + TAX
  • BL3924SR

    BL3924SR SLAVE- ELECTROMECHANICAL GROUP WITH 24V REVERSIBLE

    BL3924SR SLAVE – SELF-LOCKING GROUP WITH HINGED ARMS FOR SWING GATES WITH ENCODER 24V MAX. 400KG + NIMH BATTERIES

    BL3924SR SLAVE Encoder-controlled self-locking Master unit with hinged arms for swing gates including:
    – electronic programmer;
    – 433MHz FM receiver;
    – slot-in battery charger;
    – NiMH batteries.
    Particularly suited for installations with large size columns where the
    hinges are not aligned to the edge of the column and with gate
    leaves of up to 3,5 metres in length (up to 5m with a hinged arm
    and an electric lock) 400kg maximum weight.
    Manual release is carried out using the supplied hexagonal key after
    first unlocking and removing the covering cap.
    Operator arm to be ordered separately.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    BL3924SR

    396,00 + TAX
  • BL3924S

     

    BL3924S SLAVE- ELECTROMECHANICAL GROUP WITH 24V IRREVERSIBLE

    BL3924S SLAVE – SELF-LOCKING GROUP WITH HINGED ARMS FOR SWING GATES WITH ENCODER 24V MAX. 400KG + NIMH BATTERIES

    BL3924S SLAVE Encoder-controlled self-locking Master unit with hinged arms for swing gates including:
    – electronic programmer;
    – 433MHz FM receiver;
    – slot-in battery charger;
    – NiMH batteries.
    Particularly suited for installations with large size columns where the
    hinges are not aligned to the edge of the column and with gate
    leaves of up to 3,5 metres in length (up to 5m with a hinged arm
    and an electric lock) 400kg maximum weight.
    Manual release is carried out using the supplied hexagonal key after
    first unlocking and removing the covering cap.
    Operator arm to be ordered separately.

    BL3924S

    414,00 + TAX
  • BL1924ASW

    BL1924ASW DX – HINGED ARM AUTOMATION FOR
    SWING GATE DX(RIGHT HAND) 24V MOTOR

    BL1924ASW MOTOR IS IN PHASE OUT –
    REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TM

     BL1924ASW DX  – HINGED ARM AUTOMATION FOR SWING DOOR DX(RIGHT HAND) WITH
    ENCODER 24V PESO MAX. 150KG AND 2M

    BL1924ASW  DX: RIGHT-HAND OPERATOR UNIT WITH A 24V MOTOR
    Self-locking encoder-controlled operator:
    – operator arm included;
    – ECU to be ordered separately.

    BL1924ASW DX  Operational constraints:

    The equipment BL1924ASW DX is particularly suitable for gates
    with pillars
    large with internal hinges with respect to the pillar line.
    Ideal also for gates with leaves up to 2 meters in length, max. 150kg.
    The manual release takes place after the key door has been removed using the supplied key.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • BL1924LSW

    BL1924LSW SX – HINGED ARM AUTOMATION FOR
    SWING GATES SX(LEFT HAND) 24V MOTOR

    BL1924LSW MOTOR IS IN PHASE OUT –
    REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TM

     BL1924LSW SX  – HINGED ARM AUTOMATION FOR SWING GATES DX(RIGHT HAND) WITH
    ENCODER 24V PESO MAX. 150KG AND 2M

    BL1924LSW SX : LEFT-HAND OPERATOR UNIT WITH A 24V MOTOR
    Self-locking encoder-controlled operator:
    – operator arm included;
    – ECU to be ordered separately.

    Operational constraints:
    The equipment BL1924LSW   is particularly suitable for gates
    with pillars
    large with internal hinges with respect to the pillar line.
    Ideal also for gates with leaves up to 2 meters in length, max. 150kg.
    The manual release takes place after the key door has been removed using the supplied key.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • BL1920

    BL1920 DX – HINGED ARM AUTOMATION FOR
    SWING GATES DX(RIGHT HAND) 230V MOTOR

    BL1920 DX MOTOR IS IN PHASE OUT –
    REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TM

     BL1920 DX  – HINGED ARM AUTOMATION FOR SWING GATES DX(RIGHT HAND) WITH
    ENCODER 24V PESO MAX. 150KG AND 2M

    BL1920   DX :  RIGHT-HAND OPERATOR UNIT WITH A 230V MOTOR
    Self-locking operator with magnetic travel limits:
    – operator arm included;
    – ECU to be ordered separately.

    BL1920 Operational constraints:

    The equipment BL1920 DX is particularly suitable for gates
    with pillars
    large with internal hinges with respect to the pillar line.
    Ideal also for gates with leaves up to 2 meters in length, max. 150kg.
    The manual release takes place after the key door has been removed using the supplied key

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

Main Menu