BL824S – ELECTROMECHANICAL GROUP WITH 24V MOTOR SLAVE

BL824S – MOTOR IS IN PHASE OUT
REPLASED WITH MOTOR : BLGRIFFE24S

 BL824S MOTOR  – SELF-LOCKING GROUP SLAVE WITH ENCODER 24V MAX. 200KG
 BL824S MOTOR SLAVE Encoder-controlled self-locking Master unit for swing gate  including:
– electronic programmer;
– 433MHz FM receiver;
Particularly suited for installations with narrow columns that require
the mounting base to be less than 150mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with a hinged
arm and an electric lock) 200kg maximum weight.
Manual release is carried out using the hexagonal key located inside
the side panel.
Operator arm to be ordered separately.

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

BLTOW24M MASTER- ELECTROMECHANICAL GROUP WITH 24V MOTOR

BLTOW24M MOTOR IN PHASE OUT –
REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TM

BLTOW24M MASTER  – SELF-LOCKING GROUP WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES(optional)

BLTOW24M MASTER Encoder-controlled self-locking Master unit for swing gate with hinged arms including:
– electronic programmer;
– 433MHz FM receiver;
– gate movement signalling via led (optional).
Kit battery charger + batteries to be ordered separately.
Particularly suited for installations with narrow columns that require
the mounting base to be less than 180mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with an
electric lock), 200kg maximum weight.
Manual release is carried out using a practical locking – unlocking
lever protected by a security key.
Operator arm included.

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

BL1920 DX – HINGED ARM AUTOMATION FOR
SWING GATES DX(RIGHT HAND) 230V MOTOR

BL1920 DX MOTOR IS IN PHASE OUT –
REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TM

 BL1920 DX  – HINGED ARM AUTOMATION FOR SWING GATES DX(RIGHT HAND) WITH
ENCODER 24V PESO MAX. 150KG AND 2M

BL1920   DX :  RIGHT-HAND OPERATOR UNIT WITH A 230V MOTOR
Self-locking operator with magnetic travel limits:
– operator arm included;
– ECU to be ordered separately.

BL1920 Operational constraints:

The equipment BL1920 DX is particularly suitable for gates
with pillars large with internal hinges with respect to the pillar line.
Ideal also for gates with leaves up to 2 meters in length, max. 150kg.
The manual release takes place after the key door has been removed using the supplied key

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

BL1920L SX – HINGED ARM AUTOMATION FOR
SWING GATES SX(LEFT HAND) 230V MOTOR

BL1920LSX MOTOR IS IN PHASE OUT –
REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TM

 BL1920L SX  – HINGED ARM AUTOMATION FOR SWING DOORS SX(LEFT HAND) WITH
ENCODER 24V PESO MAX. 150KG AND 2M

BL1920L SX :  LEFT-HAND OPERATOR UNIT WITH A 230V MOTOR
Self-locking operator with magnetic travel limits:
– operator arm included;
– ECU to be ordered separately.

BL1920L SX Operational constraints:

The equipment BL1920 DX is particularly suitable for swing doors or gates
with pillars large with internal hinges with respect to the pillar line.
Ideal also for gates with leaves up to 2 meters in length, max. 150kg.
The manual release takes place after the key door has been removed using the supplied key.

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount