-
BL824MCB
BL824MCB MASTER- ELECTROMECHANICAL GROUP WITH 24V MOTOR
BL824-MCB – MOTOR IS IN PHASE OUT
REPLASED WITH MOTOR : BLGRIFFE24M
BL824MCB MOTOR – SELF-LOCKING GROUP MASTER WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES FOR SWING GATE WITH HINGED ARM
BL824MCB MOTOR MASTER Encoder-controlled self-locking Master unit including:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.
Particularly suited for installations with narrow columns that require
the mounting base to be less than 150mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with a hinged
arm and an electric lock) 200kg maximum weight.
Manual release is carried out using the hexagonal key located inside
the side panel.
Operator arm to be ordered separately.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€582,00 + TAXBL824MCB
€582,00 + TAX -
SLX824CB
SLX824CB / SLX824 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX824CB AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 800KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX824CB motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger (SLX824CB – SLX1524CB);
– NiMH batteries (SLX824CB – SLX1524CB);The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€600,00 + TAXSLX824CB
€600,00 + TAX -
BL3924MRCB
BL3924MRCB MASTER- ELECTROMECHANICAL GROUP WITH 24V REVERSIBLE
BL3924MRCB MASTER – SELF-LOCKING GROUP WITH HINGED ARMS FOR SWING GATES WITH ENCODER 24V MAX. 400KG + NIMH BATTERIES
BL3924MRCB MASTER Encoder-controlled self-locking Master unit with hinged arms for swing gates including:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.
Particularly suited for installations with large size columns where the
hinges are not aligned to the edge of the column and with gate
leaves of up to 3,5 metres in length (up to 5m with a hinged arm
and an electric lock) 400kg maximum weight.
Manual release is carried out using the supplied hexagonal key after
first unlocking and removing the covering cap.
Operator arm to be ordered separately.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€630,00 + TAXBL3924MRCB
€630,00 + TAX -
BL3924MCB
BL3924MCB MASTER- ELECTROMECHANICAL GROUP WITH 24V IRREVERSIBLE
BL3924MCB MASTER – SELF-LOCKING GROUP WITH HINGED ARMS FOR SWING GATES WITH ENCODER 24V MAX. 400KG + NIMH BATTERIES
BL3924MCB MOTOR MASTER Encoder-controlled self-locking Master unit with hinged arms for swing gates (reversible in the version BL3924MRCB) including:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.
Particularly suited for installations with large size columns where the
hinges are not aligned to the edge of the column and with gate
leaves of up to 3,5 metres in length (up to 5m with a hinged arm
and an electric lock) 400kg maximum weight.
Manual release is carried out using the supplied hexagonal key after
first unlocking and removing the covering cap.
Operator arm to be ordered separately.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€642,00 + TAXBL3924MCB
€642,00 + TAX -
SLX1524CB
SLX1524CB / SLX1524 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX1524CB AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 1500KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX1524CB motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger (SLX824CB – SLX1524CB);
– NiMH batteries (SLX824CB – SLX1524CB);
– reversible motor (SLX1024REV).The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€642,00 + TAXSLX1524CB
€642,00 + TAX -
KT-BL TAG
KT-BL TAG – 24VDC ELECTROMECHANICAL MOTOR FOR SWING GATES
KT-BL TAG KIT COMPLETE ELETTROMECHANICAL 24V MOTOR FOR SWING GATES 2M 150KG
These KIT electromechanical rams KT-BL TAG with 24Vdc motors suitable for small residential
installations with two swing gate leaves or one pedestrian gate are easy to fit
without requiring brickwork and offer excellent service with regard to the number
of manoeuvres.KT-BL TAG USING
Worm screw automation for gates with a maximum length of 2m, maximum
weight 150kg.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€672,00 + TAXKT-BL TAG
€672,00 + TAX -
KIT TAG
KIT TAG – ELECTROMECHANICAL PISTON 24V FOR SWING GATES
KIT TAG N – ELECTROMECHANICAL PISTON 24V FOR SWING GATES
The Kit with two 24 V electromechanical actuators ideal for residential swing gates up to 2 meters.
Equipped with encoder and key release with micro switch.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Reliable because it is entirely made out of quality materials as aluminum, stainless steel and technoIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€672,00 + TAXKIT TAG
€672,00 + TAX -
KT-BLGRIFFE24T MOTOR KIT
KT-BLGRIFFE24T – KIT BLGRIFFE24TM – ELECTROMECHANICAL GROUP WITH 24V MOTOR
BLGRIFFE24TM MASTER – SELF-LOCKING GROUP MOTOR WITH MECHANICAL LIMIT SWITCH 24V MAX. 200KG + NIMH BATTERIES(optional)
BLGRIFFE24TM MASTER Encoder-controlled self-locking Master unit for swing gate with hinged arms including:
– electronic programmer;
– 433MHz FM receiver;
– Operator hinged arm included.
Kit battery charger + batteries to be ordered separately.KIT CONTENTS : KT-BLGRIFFE24T
BLGRIFFE24M – MASTER SELF-LOCKING GROUP
with 24V motor controlled by encoder, programmer electronic,
433MHz FM receiver, battery charger and NiMH batteries.BLGRIFFE24S – SLAVE SELF-LOCKING GROUP
to automate the second door.ICON – LED FLASHING LIGHT 24V – 230V
with built-in antenna.RSQ504OC2 – 2 CHANNEL RECEIVER OPEN COLLECTOR
DUAL-CHANNEL CARD RECEIVER plug-in open collector 433MHz.
Versions for the S508 – S486 – S449 and EDGE series are available on request.TXQ504C4 – 2 4-FUNCTION TRANSMITTERS
433MHz FM ROLLING CODE.CDR999 – PAIR OF SURFACE PHOTOCELLS
in class 3 with adjustable optics, 10m range.CABPC10 – 10m CONNECTION CABLE
with pre-insulated end tubes.PLATE-INT – INTERNATIONAL WARNING PLATE
in multilingual PP.€685,00 + TAXKT-BLGRIFFE24T MOTOR KIT
€685,00 + TAX -
EVO 2000
EVO2000 / EVO 2000 : OILBATH GEAR MOTOR FOR SLIDING GATES
EVO 2000 /EVO2000 : OILBATH GEAR MOTOR FOR SLIDING GATE 2000Kg 230V 400V THREE-PHASE
Electromechanical gearmotor in oilbath ideal for industrial sliding gates up to 2000 Kg.
Complete with encoder, magnetic limits and built built-in control unit.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Versatile fixing plate with adjustable height and depth.
Reliable with a sturdy aluminum base treated against oxidation and all moving parts in oilbath.
Constant performance over time and in any condition thanks to reduced wear&tear
and the possibility to maintain the oil at the ideal temperature using HOT (optional).
Manual release with coded lock.EVO 2000
230 V electromeccanical gearmotor in oil bath.
For industrial sliding gates up to 2000kg.
Oil bath lubrication. -
SLX3024
SLX3024 – SLX 3024 – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX3024 MOTOR – FAST SELF-LOCKING UNIT ENCODER 24V MAX. 3000KG FOR SLIDING GATES
The SLX3024 motor for sliding gates automation is made up of a self-locking gear motor controlled
by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;The SLX3024 MOTOR electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).
The events can be enabled or disabled (during holiday periods) either
from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual knob
operated release system protected by a robust access door with
a personalised key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€720,00 + TAXSLX3024
€720,00 + TAX -
SLX1224REV
SLX1224REV / SLX1224 REV – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX1224REV AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 1200KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX1024REV motor for sliding automation gate is made up of a self-locking gear motor (with a gate drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger (SLX824CB – SLX1524CB);
– NiMH batteries (SLX824CB – SLX1524CB);
– reversible motor (SLX1224REV).The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€732,00 + TAXSLX1224REV
€732,00 + TAX -
KT-BLGRIFFE24 MOTOR KIT
KT-BLGRIFFE24 – KIT BLGRIFFE24M – ELECTROMECHANICAL GROUP WITH 24V MOTOR
BLGRIFFE24M MASTER – SELF-LOCKING GROUP MOTOR WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES(optional)
BLGRIFFE24M MASTER Encoder-controlled self-locking Master unit for swing gate with hinged arms including:
– electronic programmer;
– 433MHz FM receiver;
– Operator hinged arm included.
Kit battery charger + batteries to be ordered separately.KIT CONTENTS : KT-BLGRIFFE24
BLGRIFFE24M – MASTER SELF-LOCKING GROUP
with 24V motor controlled by encoder, programmer electronic,
433MHz FM receiver, battery charger and NiMH batteries.BLGRIFFE24S – SLAVE SELF-LOCKING GROUP
to automate the second door.ICON – LED FLASHING LIGHT 24V – 230V
with built-in antenna.TXQ504C4 – 2 4-FUNCTION TRANSMITTERS
433MHz FM ROLLING CODE.CDR999 – PAIR OF SURFACE PHOTOCELLS
in class 3 with adjustable optics, 10m range.CABPC10 – 10m CONNECTION CABLE
with pre-insulated end tubes.PLATE-INT – INTERNATIONAL WARNING PLATE
in multilingual PP.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€745,00 + TAXKT-BLGRIFFE24 MOTOR KIT
€745,00 + TAX