-
KT-SLEVO600
KT-SLEVO600- KIT IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES 230V
KT SLEVO600 / KT-SLEVO 600 SELF-LOCKING SLIDING GATE MOTOR 230V 600Kg
For residential/industrial sliding gates up to 600kg. Complete with
encoder, magnetic limits, electronic brake and a built-in control unit.
Constant performance over time and in any condition thanks to reduced
wear&tear and the possibility to maintain the oil at the ideal temperature
(in the versions SLEVO800 and SLEVO1200) using HOT (optional).The appliance is fitted with a safe and secure key-operated manual
release system protected by a plastic access door.
ELECTROMECHANICAL GEAR MOTOR POWERED BY 230V
Grease lubrication. For gates up to 600kg.KT SLEVO600 USING
The kit KT SLEVO600 contains all the command, control and safety devices required
to carry out a residential installation for medium to small size sliding
gates with a maximum weight of 600kg.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€410,00€486,00+ TAXKT-SLEVO600
€410,00€486,00+ TAX -
BL3924S
BL3924S SLAVE- ELECTROMECHANICAL GROUP WITH 24V IRREVERSIBLE
BL3924S SLAVE – SELF-LOCKING GROUP WITH HINGED ARMS FOR SWING GATES WITH ENCODER 24V MAX. 400KG + NIMH BATTERIES
BL3924S SLAVE Encoder-controlled self-locking Master unit with hinged arms for swing gates including:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.
Particularly suited for installations with large size columns where the
hinges are not aligned to the edge of the column and with gate
leaves of up to 3,5 metres in length (up to 5m with a hinged arm
and an electric lock) 400kg maximum weight.
Manual release is carried out using the supplied hexagonal key after
first unlocking and removing the covering cap.
Operator arm to be ordered separately.€414,00 + TAXBL3924S
€414,00 + TAX -
SL524
SL524 – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SL524 AUTOMATION – FAST SELF-LOCKING UNIT ENCODER 24V MAX. 500KG FOR SLIDING GATE
The SL524 automation is made up of a self-locking gear motor controlled
by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;The electronic programmer of SL524 automation system is factory fitted with a graphic LCD
display (16 digits x 2 lines) in six different languages that monitors
the programming stages, counts and displays the number of
manoeuvres carried out by the machine.It allows you to rapidly set the system parameters including: the sequential button mode,
automatic reclosing, warning lamp pre-flashing, flashing warning
lamp activation, indicator light and photoelectric cell function setting
and transmitter code management etc.
The appliance is fitted with a safe and secure manual release system
with a personalised knob (supplied with the appliance).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€414,00 + TAXSL524
€414,00 + TAX -
SLACE601
SLACE601 – IRREVERSIBLE GEARMOTOR 24V FOR SLIDING GATES 600Kg
SLACE601 / ACE601 -GEARMOTOR 24V FOR SLIDING GATES UP TO 600Kg
Electromechanical gearmotor ideal for residential sliding gates.
Complete with encoder, magnetic limits and advanced built-in control unit.The automation SLACE601 24V gearmotor is made up of self-locking gear motor controlled by
encoder and magnetic travel limits with an in-built:
– electronic programmer;
– motor speed regulation;
– motor drive power regulation;
– double 8,2kΩ inputs for connecting safety edges;
– slot-in open collector receiver card.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€414,00 + TAXSLACE601
€414,00 + TAX -
ACE 601
ACE 601 / ACE601 : GEARMOTORS FOR SLIDING GATES 24V
ACE 601 / ACE601 : GEARMOTORS FOR SLIDING GATES 24V 600Kg
Electromechanical gearmotor in grease lubrication.
Ideal for industrial sliding gates up to 600 Kg.
Complete with encoder, magnetic limits and built built-in control unit.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Versatile fixing plate with adjustable height and depth.
Reliable with a sturdy aluminum base treated against oxidation and all moving parts in oilbath.
Constant performance over time and in any condition thanks to reduced wear&tear
and the possibility to maintain the oil at the ideal temperature using HOT (optional).
Manual release with coded lock.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€414,00 + TAXACE 601
€414,00 + TAX -
SLX624 MOTOR
SLX824CB / SLX824 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX824CB AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 800KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX824CB motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger (SLX824CB – SLX1524CB);
– NiMH batteries (SLX824CB – SLX1524CB);
– reversible motor (SLX1024REV).The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€426,00 + TAXSLX624 MOTOR
€426,00 + TAX -
BLi1000 INSIDE
BLi1000 INSIDE- SELF-LOCKING ACTUATOR INSIDE 24v
BLi1000 INSIDE – INSIDE MOTOR SELF-LOCKING GROUP WITH ENCODER 24V MAX. 200KG
INTEGRABLE ELECTROMECHANICAL ACTUATOR:
– 24V MOTOR
– FOR GATES MAX 200Kg
– DOOR LENGTH 2,5M
– WITH MAX OPENING. 180 °
Self-locking actuator controlled by encoder.
INSIDE motor: Can be integrated into swing gatesThe automation KT-BLi1000 inside motor is encoder controlled by an external ECU factory fitted
with a graphic LCD display (128 x 128 pixels) with backlighting in six
different languages. The geared motors are connected to the electronics
card by means of a six-wire, fast-fitting cable.CC242EFAMCB : ELECTRONIC PROGRAMMER FOR TWO MOTORS
including:
– 433MHz FM receiver;
– multi-decoding module S449-S486-S504-S508;
– battery charger and NiMH batteries.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€428,00 + TAXBLi1000 INSIDE
€428,00 + TAX -
SLEVO800
SLEVO800 / SLEVO 800 – IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES 230V
SLEVO800 / SLEVO 800 SELF-LOCKING SLIDING GATE MOTOR 230V 600Kg
For residential/industrial sliding gates up to 800kg. Complete with
encoder, magnetic limits, electronic brake and a built-in control unit.
Constant performance over time and in any condition thanks to reduced
wear&tear and the possibility to maintain the oil at the ideal temperature
(in the versions SLEVO800 and SLEVO1200) using HOT (optional).The appliance is fitted with a safe and secure key-operated manual
release system protected by a plastic access door.
ELECTROMECHANICAL GEAR MOTOR POWERED BY 230V
Grease lubrication. For gates up to 800kg.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€432,00 + TAXSLEVO800
€432,00 + TAX -
EVO 800
EVO800 / EVO 800 : OILBATH GEARMOTORS FOR SLIDING GATES
EVO 800 /EVO800 : OILBATH GEARMOTORS FOR SLIDING GATES 800Kg
Electromechanical gearmotor in oilbath ideal for industrial sliding gates up to 800 Kg.
Complete with encoder, magnetic limits and built built-in control unit.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Versatile fixing plate with adjustable height and depth.
Reliable with a sturdy aluminum base treated against oxidation and all moving parts in oilbath.
Constant performance over time and in any condition thanks to reduced wear&tear
and the possibility to maintain the oil at the ideal temperature using HOT (optional).
Manual release with coded lock.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€432,00 + TAXEVO 800
€432,00 + TAX -
GLMECHA230M MOTOR
GLMECHA230M / GLMECHA 230M – MASTER SELF-LOCKING SWINGING GARAGE DOOR MOTOR 230V
GLMECHA230M / GLMECHA 230M – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD GARAGE DOORS 230V
Electromechanical gearmotor 230 V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.GLMECHA230M / GLMECHA 230M – SELF-LOCKING GARAGE DOOR MOTOR
SELF-PROGRAMMING ELECTROMECHANICAL UNIT WITH A 230V MOTOR (433MHz)
Self-locking encoder-controlled Master automation with an in-built
electronic programmer.
Operator arms are to be ordered separately.
Kit battery charger + batteries to be ordered separately.
with a 230V slave motor for garage doors 2,5 m and 8 m2 .If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€449,00 + TAXGLMECHA230M MOTOR
€449,00 + TAX -
GLMECHA24M MOTOR
GLMECHA24M / GLMECHA 24M – MASTER SELF-LOCKING SWINGING GARAGE DOOR MOTOR 24V
GLMECHA24M / GLMECHA 24M – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD GARAGE DOORS 24V
Electromechanical gearmotor 24V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.GLMECHA24M / GLMECHA 24M – SELF-LOCKING GARAGE DOOR MOTOR
SELF-PROGRAMMING ELECTROMECHANICAL UNIT WITH A 24V MOTOR (433MHz)
Self-locking encoder-controlled Master automation with an in-built
electronic programmer.
Operator arms are to be ordered separately.
Kit battery charger + batteries to be ordered separately.
with a 230V slave motor for garage doors 2,5 m and 8 m2 .If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€459,00 + TAXGLMECHA24M MOTOR
€459,00 + TAX -
GENERIC PRODUCT MANUAL SALE
ILB SINCRO FOTOCELLULE DA INCASSO
ILB SINCRO RECESSED PHOTOCELLS
PHOTOCELLULES À ENCASTRER ILB SINCRO
€467,26 + TAXGENERIC PRODUCT MANUAL SALE
€467,26 + TAX
