-
SLX3024CB
SLX3024CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX3024CB MOTOR – FAST SELF-LOCKING UNIT ENCODER 24V MAX. 3000KG + NIMH BATTERIES FOR SLIDING GATE
The SLX3024CB motor for sliding gate automation is made up of a self-locking gear motor controlled
by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.
The SLX3024CB MOTOR electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).
The events can be enabled or disabled (during holiday periods) either
from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual knob
operated release system protected by a robust access door with
a personalised key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€786,00 + TAXSLX3024CB
€786,00 + TAX -
SLX624 MOTOR
SLX824CB / SLX824 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX824CB AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 800KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX824CB motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger (SLX824CB – SLX1524CB);
– NiMH batteries (SLX824CB – SLX1524CB);
– reversible motor (SLX1024REV).The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€426,00 + TAXSLX624 MOTOR
€426,00 + TAX -
SLX624CB MOTOR
SLX824CB / SLX824 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX824CB AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 800KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX824CB motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger (SLX824CB – SLX1524CB);
– NiMH batteries (SLX824CB – SLX1524CB);
– reversible motor (SLX1024REV).The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€492,00 + TAXSLX624CB MOTOR
€492,00 + TAX -
SLX824
SLX824 / SLX 824 – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX824 AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 800KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX824 motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.€528,00 + TAXSLX824
€528,00 + TAX -
SLX824CB
SLX824CB / SLX824 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX824CB AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 800KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX824CB motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger (SLX824CB – SLX1524CB);
– NiMH batteries (SLX824CB – SLX1524CB);The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€600,00 + TAXSLX824CB
€600,00 + TAX -
SNAP3
SNAP3 – ELECTROMECHANICAL BARRIER UP TO 3M
SNAP3 / SNAP 3 – ELECTROMECHANICAL BARRIER FOR ACCESS CONTROL UP TO 3M
Barrier SNAP 3 with enhanced electromechanical gearmotor powered at 24 Vdc.
Designed to control accesses up to 3 m with fluid and fast movements.
Snap, in addition to the new mechanical project, stands out for its advanced electronic control
unit and a complete series of accessories.Safe thanks to the precision and sensitivity of the encoder and to the acceleration and deceleration ramps.
Practice with the control unit positioned at the top, the built-in signaling LEDs
the various predispositions including the one for the two buffer batteries.
Electromechanical barrier 24 V, in sturdy steel structure.
C/w control unit and encoder.
Max boom length 3,25 m. Net span 3 m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€1.345,00 + TAXSNAP3
€1.345,00 + TAX -
SNAP4
SNAP4 – ELECTROMECHANICAL BARRIER UP TO 4M
SNAP4 / SNAP 4 – ELECTROMECHANICAL BARRIER FOR ACCESS CONTROL UP TO 4M
Barrier SNAP 4 with enhanced electromechanical gearmotor powered at 24 Vdc.
Designed to control accesses up to 4 m with fluid and fast movements.
Snap, in addition to the new mechanical project, stands out for its advanced electronic control
unit and a complete series of accessories.Safe thanks to the precision and sensitivity of the encoder and to the acceleration and deceleration ramps.
Practice with the control unit positioned at the top, the built-in signaling LEDs
the various predispositions including the one for the two buffer batteries.
Electromechanical barrier 24 V, in sturdy steel structure.
C/w control unit and encoder.
Max boom length 4,25 m. Net span 4 m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€1.225,00 + TAXSNAP4
€1.225,00 + TAX -
SNAP6
SNAP6 – ELECTROMECHANICAL BARRIER UP TO 6M
SNAP6 / SNAP 6 – ELECTROMECHANICAL BARRIER FOR ACCESS CONTROL UP TO 6M
Barrier SNAP 6 with enhanced electromechanical gearmotor powered at 24 Vdc.
Designed to control accesses up to 6 m with fluid and fast movements.
Snap, in addition to the new mechanical project, stands out for its advanced electronic control
unit and a complete series of accessories.Safe thanks to the precision and sensitivity of the encoder and to the acceleration and deceleration ramps.
Practice with the control unit positioned at the top, the built-in signaling LEDs
the various predispositions including the one for the two buffer batteries.
Electromechanical barrier 24 V, in sturdy steel structure.
C/w control unit and encoder.
Max boom length 6,25 m. Net span 6 m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€1.360,00 + TAXSNAP6
€1.360,00 + TAX -
SPW10
SPW 10 – SUPPLEMENTARY SOLAR PANEL KIT FOR SUN POWER
SPW10 –SUPPLEMENTARY SOLAR PANEL KIT FOR SUN POWER
SUPPLEMENTARY PHOTOVOLTAIC SOLAR PANEL KIT :
Two photovoltaic panels complete with adjustable brackets.
SPW10 Kit to increase the power capacity of SUNPOWER Power cupply systemIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€168,00 + TAXSPW10
€168,00 + TAX -
SRCKIT8 – KIT BI-CHANNEL UNIT + SAFETY EDGE INTERFACE
SRCKIT8E / SRCKIT4E – KIT SAFETY EDGE + INTERFACE + STATIONARY UNIT BI-CHANNEL 868MHz / 433MHz
SRCKIT8E / SRCKIT8 – KIT SAFETY EDGE INTERFACE + BI-CHANNEL STATIONARY TRANSCEIVER UNIT 868MHz
SRCRX8E / SRCTXE – SAFETY EDGE TRANSCEIVER INTERFACE
SRCTX8E / SRCRXE – BI-CHANNEL STATIONARY TRANSCEIVER UNIT
ROLLING CODE FM RADIO system. transmission frequency: 868MHz
SRCKIT4E – KIT SAFETY EDGE INTERFACE + BI-CHANNEL STATIONARY TRANSCEIVER UNIT 433MHz
SRCRX4E – SAFETY EDGE TRANSCEIVER INTERFACE
SRCTX4E – BI-CHANNEL STATIONARY TRANSCEIVER UNIT
ROLLING CODE FM RADIO system. transmission frequency: 868MHzSRCTX8E / SRCTX4E / SRCTXE – SAFETY EDGE TRANSCEIVER INTERFACE
Power supply 2 alkaline or lithium AA batteries.
Safety edge signal input NC/8.2kΩ.
Maximum radio signal range 20m.
Shockproof case IP65.SRCTX8E / SRCTX4E / SRCRXE – BI-CHANNEL STATIONARY TRANSCEIVER UNIT
Power supply 12/24Vac-dc.
Maximum radio signal range 20m.
8 safety devices – 2 safety outputs NC/8.2kΩ.
Shockproof case IP65.Before ordering, choose the frequency you want to purchase: 433MHz or 868MHz
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€99,00 + TAX
