• SLACEFAST

    SLACEFAST – IRREVERSIBLE GEARMOTOR 24V FOR SLIDING GATES 300Kg

    SLACEFAST / ACE FAST -GEARMOTOR 24V FOR SLIDING GATES UP TO 300Kg
    Electromechanical gearmotor ideal for residential sliding gates.
    Complete with encoder, magnetic limits and advanced built-in control unit.

    The automation SLACEFAST 24V is made up of self-locking gear motor controlled by
    encoder and magnetic travel limits with an in-built:
    – electronic programmer;
    – motor speed regulation;
    – motor drive power regulation;
    – slot-in open collector receiver card.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    SLACEFAST

    282,00 + TAX
  • SLEVO1200

    SLEVO1200 / SLEVO 1200 – IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES  230V

    SLEVO1200 / SLEVO 1200 SELF-LOCKING SLIDING GATE MOTOR 230V 1200Kg
    For residential/industrial sliding gates up to 1200kg. Complete with
    encoder, magnetic limits, electronic brake and a built-in control unit.
    Constant performance over time and in any condition thanks to reduced
    wear&tear and the possibility to maintain the oil at the ideal temperature
    (in the versions SLEVO800 and SLEVO1200) using HOT (optional).

    The appliance is fitted with a safe and secure key-operated manual
    release system protected by a plastic access door.
    ELECTROMECHANICAL GEAR MOTOR POWERED BY 230V
    Grease lubrication. For gates up to 1200kg.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    SLEVO1200

    510,00 + TAX
  • SLEVO2000

    SLEVO2000 / SLEVO 2000 – IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES  230V 400V

    SLEVO2000 / SLEVO 2000 SELF-LOCKING SLIDING GATE MOTOR 230V 400V 2000Kg
    For residential/industrial sliding gates up to 2000kg. Complete with
    encoder, magnetic limits, electronic brake and a built-in control unit.
    Constant performance over time and in any condition thanks to reduced
    wear&tear and the possibility to maintain the oil at the ideal temperature
    (in the versions SLEVO800 and SLEVO1200) using HOT (optional).

    The appliance is fitted with a safe and secure key-operated manual
    release system protected by a plastic access door.
    ELECTROMECHANICAL GEAR MOTOR POWERED BY 230V 400V
    Grease lubrication. For gates up to 2000kg.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • SLEVO600

    SLEVO600 / SLEVO 600 – IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES  230V

    SLEVO600 / SLEVO 600 SELF-LOCKING SLIDING GATE MOTOR 230V 600Kg
    For residential/industrial sliding gates up to 600kg. Complete with
    encoder, magnetic limits, electronic brake and a built-in control unit.
    Constant performance over time and in any condition thanks to reduced
    wear&tear and the possibility to maintain the oil at the ideal temperature
    (in the versions SLEVO800 and SLEVO1200) using HOT (optional).

    The appliance is fitted with a safe and secure key-operated manual
    release system protected by a plastic access door.
    ELECTROMECHANICAL GEAR MOTOR POWERED BY 230V
    Grease lubrication. For gates up to 600kg.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    SLEVO600

    378,00 + TAX
  • SLEVO800

    SLEVO800 / SLEVO 800 – IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES  230V

    SLEVO800 / SLEVO 800 SELF-LOCKING SLIDING GATE MOTOR 230V 600Kg
    For residential/industrial sliding gates up to 800kg. Complete with
    encoder, magnetic limits, electronic brake and a built-in control unit.
    Constant performance over time and in any condition thanks to reduced
    wear&tear and the possibility to maintain the oil at the ideal temperature
    (in the versions SLEVO800 and SLEVO1200) using HOT (optional).

    The appliance is fitted with a safe and secure key-operated manual
    release system protected by a plastic access door.
    ELECTROMECHANICAL GEAR MOTOR POWERED BY 230V
    Grease lubrication. For gates up to 800kg.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    SLEVO800

    432,00 + TAX
  • SLX1224REV

    SLX1224REV / SLX1224 REV – ELECTROMECHANICAL UNIT WITH A 24V MOTOR

    SLX1224REV  AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 1200KG + NIMH BATTERIES FOR SLIDING AUTOMATION

    The SLX1024REV motor for sliding automation gate is made up of a self-locking gear motor (with a gate drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
    – electronic programmer;
    – 433MHz FM receiver;
    – slot-in battery charger (SLX824CB – SLX1524CB);
    – NiMH batteries (SLX824CB – SLX1524CB);
    – reversible motor (SLX1224REV).

    The electronic programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to rapidly set the system parameters including:
    the sequential button mode, automatic reclosing, warning lamp
    pre-flashing, intermittent warning lamp activation, indicator light and
    photoelectric cell function setting etc.

    The electronics card, thanks to the presence of the real-time clock,
    allows you to set 10 events (shown on the display) and these events
    permit you to regulate the opening and closing of the motor at
    different times during the day within 3 weekly time bands (Mon-
    Fri, Sat-Sun, Mon-Sun).

    The events can be enabled or disabled (during holiday periods)
    either from the menu or by means of a radio channel.
    The appliance is fitted with a safe and secure manual
    release system activated by a personalised key.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    SLX1224REV

    732,00 + TAX
  • SLX1524 MOTOR

    SLX1524  / SLX 1524 – ELECTROMECHANICAL UNIT WITH A 24V MOTOR

    SLX1524  AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 1500KG FOR SLIDING AUTOMATION

    The SLX1524  motor for sliding automation gate is made up of a self-locking gear motor (with a gate
    drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
    – electronic programmer;
    – 433MHz FM receiver;

    The electronic programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to rapidly set the system parameters including:
    the sequential button mode, automatic reclosing, warning lamp
    pre-flashing, intermittent warning lamp activation, indicator light and
    photoelectric cell function setting etc.

    The electronics card, thanks to the presence of the real-time clock,
    allows you to set 10 events (shown on the display) and these events
    permit you to regulate the opening and closing of the motor at
    different times during the day within 3 weekly time bands (Mon-
    Fri, Sat-Sun, Mon-Sun).

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • SLX1524CB

    SLX1524CB  / SLX1524 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR

    SLX1524CB  AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 1500KG + NIMH BATTERIES FOR SLIDING AUTOMATION

    The SLX1524CB  motor for sliding automation gate is made up of a self-locking gear motor (with a gate
    drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
    – electronic programmer;
    – 433MHz FM receiver;
    – slot-in battery charger (SLX824CB – SLX1524CB);
    – NiMH batteries (SLX824CB – SLX1524CB);
    – reversible motor (SLX1024REV).

    The electronic programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to rapidly set the system parameters including:
    the sequential button mode, automatic reclosing, warning lamp
    pre-flashing, intermittent warning lamp activation, indicator light and
    photoelectric cell function setting etc.

    The electronics card, thanks to the presence of the real-time clock,
    allows you to set 10 events (shown on the display) and these events
    permit you to regulate the opening and closing of the motor at
    different times during the day within 3 weekly time bands (Mon-
    Fri, Sat-Sun, Mon-Sun).

    The events can be enabled or disabled (during holiday periods)
    either from the menu or by means of a radio channel.
    The appliance is fitted with a safe and secure manual
    release system activated by a personalised key.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    SLX1524CB

    642,00 + TAX
  • SLX24DRACO

    SLX24DRACO – ELECTROMECHANICAL UNIT WITH A 24V MOTOR

    SLX24DRACO  MOTOR – FAST SELF-LOCKING UNIT ENCODER 24V FOR SLIDING GATE MAX. 1000KG + NIMH BATTERIES

    The SLX24DRACO motor for sliding gate automation is made up of a self-locking gear motor controlled
    by magnetic encoder with an in-built:
    – electronic programmer;
    – 433MHz FM receiver;
    The innovative SLX24DRACO system permits the gate’s movement to
    be accompanied with total security and features a “variable speed
    function” which can be adjusted according to the different installation
    requirements up to a maximum speed of 30m per minute.

    The electronic programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to rapidly set the system parameters including:
    the sequential button mode, automatic reclosing, warning lamp
    pre-flashing, intermittent warning lamp activation, indicator light and
    photoelectric cell function setting etc.
    The electronics card, thanks to the presence of the real-time clock,
    allows you to set 10 events (shown on the display) and these events
    permit you to regulate the opening and closing of the motor at
    different times during the day. The appliance is fitted with a safe and
    secure lever operated manual release system protected by a robust
    access door with a personalised key.

    SLX24DRACO

    870,00 + TAX
  • SLX24DRACO2 MOTOR

    SLX24DRACO2 – ELECTROMECHANICAL UNIT WITH A 24V MOTOR

    SLX24DRACO2  MOTOR – FAST SELF-LOCKING UNIT ENCODER 24V FOR SLIDING GATES MAX. 2000KG + NIMH BATTERIES

    The SLX24DRACO2 motor for sliding gate automation is made up of a self-locking gear motor controlled
    by magnetic encoder with an in-built:
    – electronic programmer;
    – 433MHz FM receiver;
    The innovative SLX24DRACO2 system permits the gate’s movement to
    be accompanied with total security and features a “variable speed
    function” which can be adjusted according to the different installation
    requirements up to a maximum speed of 30m per minute.

     

    The electronic programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to rapidly set the system parameters including:
    the sequential button mode, automatic reclosing, warning lamp
    pre-flashing, intermittent warning lamp activation, indicator light and
    photoelectric cell function setting etc.
    The electronics card, thanks to the presence of the real-time clock,
    allows you to set 10 events (shown on the display) and these events
    permit you to regulate the opening and closing of the motor at
    different times during the day. The appliance is fitted with a safe and
    secure lever operated manual release system protected by a robust
    access door with a personalised key.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    SLX24DRACO2 MOTOR

    895,00 + TAX
  • SLX3024

    SLX3024 – SLX 3024 –  ELECTROMECHANICAL UNIT WITH A 24V MOTOR

    SLX3024 MOTOR – FAST SELF-LOCKING UNIT ENCODER 24V MAX. 3000KG FOR SLIDING GATES

    The SLX3024 motor for sliding gates automation is made up of a self-locking gear motor controlled
    by magnetic encoder with an in-built:
    – electronic programmer;
    – 433MHz FM receiver;

    The  SLX3024  MOTOR electronic programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to rapidly set the system parameters including:
    the sequential button mode, automatic reclosing, warning lamp
    pre-flashing, intermittent warning lamp activation, indicator light and
    photoelectric cell function setting etc.

    The electronics card, thanks to the presence of the real-time clock,
    allows you to set 10 events (shown on the display) and these events
    permit you to regulate the opening and closing of the motor at
    different times during the day within 3 weekly time bands (Mon-
    Fri, Sat-Sun, Mon-Sun).
    The events can be enabled or disabled (during holiday periods) either
    from the menu or by means of a radio channel.
    The appliance is fitted with a safe and secure manual knob
    operated release system protected by a robust access door with
    a personalised key.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    SLX3024

    720,00 + TAX
  • SLX3024CB

    SLX3024CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR

    SLX3024CB MOTOR – FAST SELF-LOCKING UNIT ENCODER 24V MAX. 3000KG + NIMH BATTERIES FOR SLIDING GATE

    The SLX3024CB motor for sliding gate automation is made up of a self-locking gear motor controlled
    by magnetic encoder with an in-built:
    – electronic programmer;
    – 433MHz FM receiver;
    – slot-in battery charger;
    – NiMH batteries.
    The  SLX3024CB  MOTOR electronic programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to rapidly set the system parameters including:
    the sequential button mode, automatic reclosing, warning lamp
    pre-flashing, intermittent warning lamp activation, indicator light and
    photoelectric cell function setting etc.

    The electronics card, thanks to the presence of the real-time clock,
    allows you to set 10 events (shown on the display) and these events
    permit you to regulate the opening and closing of the motor at
    different times during the day within 3 weekly time bands (Mon-
    Fri, Sat-Sun, Mon-Sun).
    The events can be enabled or disabled (during holiday periods) either
    from the menu or by means of a radio channel.
    The appliance is fitted with a safe and secure manual knob
    operated release system protected by a robust access door with
    a personalised key.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    SLX3024CB

    786,00 + TAX

Main Menu