-
SAFEPRC4 – WIRELESS RADIO PHOTOCELLS
SAFECDR4 – PAIR OF WIRELESS PHOTOCELL RADIO PHOTOELECTRIC CELLS 433MHz
SAFECDR4 – PAIR OF WIRELESS PHOTOELECTRIC CELLS RADIO PHOTOCELLS 433MHz
3V lithium battery power supply.
Maximum radio signal range 30m.
Maximum infrared range 10m.
Transmitter and receiver housed in shockproof and waterproof cases IP65.
ROLLING CODE FM RADIO system. transmission frequency: 433MHz€129,00 + TAXSAFEPRC4 – WIRELESS RADIO PHOTOCELLS
€129,00 + TAX -
METALDEC230X – SELF-CALIBRATING METAL DETECTOR 230V
METALDEC230X – SELF-CALIBRATING METAL DETECTOR 230V
METALDEC230X – SELF-CALIBRATION METAL DETECTOR METALLIC MASS DETECTOR 230V MOUNTING ON DIN RAIL
Power supply:: 230Vac (50-60Hz) 35mA
Sensitivity: 8 levels
Relay output: 2 (max 1A 30V)
Operating temperature range: -20°…+55°C
Protection grade: IP40
Overall dimensions: 101 x 71 x 35.DOUBLE RELAY WITH SERIAL EXCHANGE NO-NC
SENSITIVITY SELECTOR H-M-L AND RESET BUTTON
UNDECAL CONNECTION FOR DIN RAIL GUIDE
RAIL GUIDE SOCKET DIN 46277
SENSITIVITY SELECTION DIP-SWITCHESIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€132,00 + TAXMETALDEC230X – SELF-CALIBRATING METAL DETECTOR 230V
€132,00 + TAX -
ZEN60E
ZEN60E – ZEN60E -ELECTROMECHANICAL ACTUATOR FOR SECTIONAL DOORS
ZEN60E -ELECTROMECHANICAL ACTUATOR FOR SECTIONAL DOORS
Electromechanical gearmotor 24 V ideal for sectional and overhead doors, up to 12 sqm. Complete with
encoder and in-built control it is available with belt or chain transmission.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
LED courtesy light.
Practical thanks to the control unit with plug-in receiver and self-learning function and the dedicated
connection to resistive edges 8.2kΩ (EN12978)
Versatile available with guide in one single piece or in sections.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€150,00 + TAXZEN60E
€150,00 + TAX -
CRL170 MOTOR FOR ROLLING SHUTTERS
CRL170 / CRL 170 – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
CRL170 / CRL 170 SHUTTERS – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
230V geared motor permitting a maximum lifting power of 180kg.
An electric lock must be fitted to guarantee that the rolling shutter
locks in the closed position.
Precise and reliable, thanks to the integrated travel limits, this model
may fitted to all types of rolling shutter with a 60mm or 48mm drive
shaft diameter and a crown wheel diameter of 200mm e 220mm.
Maximum rolling shutter height 6m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€150,00 + TAXCRL170 MOTOR FOR ROLLING SHUTTERS
€150,00 + TAX -
GLZEN60E
GLZEN60E – GL ZEN60E -ELECTROMECHANICAL ACTUATOR SECTIONAL DOORS
GLZEN60E / GL ZEN60E -ELECTROMECHANICAL ACTUATOR FOR SECTIONAL DOORS
Electromechanical gearmotor 24 V ideal for sectional and overhead doors, up to 12 sqm. Complete with
encoder and in-built control it is available with belt or chain transmission.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
LED courtesy light.
Practical thanks to the control unit with plug-in receiver and self-learning function and the dedicated
connection to resistive edges 8.2kΩ (EN12978)
Versatile available with guide in one single piece or in sections.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€150,00 + TAXGLZEN60E
€150,00 + TAX -
T124 CONTROL UNIT
T124 – CONTROL UNIT MOTORS 24V
T124 / T 124 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T124 for 1 motor 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€152,00 + TAXT124 CONTROL UNIT
€152,00 + TAX -
PRG807001
PRG807001 – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG807001 – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 450W.
Digital work time control separately memorised for each gate leaf guided by a
6-digit display. Possible operation without mechanical travel limits. Torque setting.
Maximum power initial thrust control, torque limitation and deceleration
management with deceleration zone control. The appliance is fitted with an
interface for the insertion of a standard Cardin radio receiver card.
Suitable for the control of automatic gates and doors with two 230V motors.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€153,00 + TAXPRG807001
€153,00 + TAX -
PRG304ETC
PRG304ETC – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG304ETC – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 650W.
ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS
Digital work time control. Command inputs: TA, TC and TB. Security inputs:
photocells, safety edge (N.C. contact or 8.2 kΩ), digital safety edge.
Output for a courtesy light 230Vac 300W and for a led warning light. The
appliance is supplied with a S449, 433MHz, FM decoder.
Suitable for the control of automatic rolling shutters.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€156,00 + TAXPRG304ETC
€156,00 + TAX -
PRG230M2
PRG230M2 – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG230M2 – ELECTRONIC PROGRAMMERS FOR THE CONTROL OF TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 470 + 470W
Digital work time control separately memorised for each gate leaf guided by a
6-digit display. Possible operation without mechanical travel limits. Torque setting.
Maximum power initial thrust control, torque limitation and deceleration
management with deceleration zone control. The appliance is fitted with an
interface for the insertion of a standard Cardin radio receiver card.
Suitable for the control of automatic gates and doors with two 230V motors.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€168,00 + TAXPRG230M2
€168,00 + TAX -
ZEN100E
ZEN100E – ZEN100E -ELECTROMECHANICAL ACTUATOR FOR SECTIONAL DOORS
ZEN100E -ELECTROMECHANICAL ACTUATOR FOR SECTIONAL DOORS
Electromechanical gearmotor 24 V ideal for sectional and overhead doors, up to 12 sqm.
Complete with encoder and in-built control it is available with belt or chain transmission.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
LED courtesy light.
Practical thanks to the control unit with plug-in receiver and self-learning function
and the dedicated connection to resistive edges 8.2kΩ (EN12978)
Versatile available with guide in one single piece or in sections.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€168,00 + TAXZEN100E
€168,00 + TAX -
SPW10
SPW 10 – SUPPLEMENTARY SOLAR PANEL KIT FOR SUN POWER
SPW10 –SUPPLEMENTARY SOLAR PANEL KIT FOR SUN POWER
SUPPLEMENTARY PHOTOVOLTAIC SOLAR PANEL KIT :
Two photovoltaic panels complete with adjustable brackets.
SPW10 Kit to increase the power capacity of SUNPOWER Power cupply systemIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€168,00 + TAXSPW10
€168,00 + TAX -
GLZEN100E
GLZEN100E – ELECTROMECHANICAL ACTUATOR SECTIONAL DOORS
GLZEN100E -ELECTROMECHANICAL ACTUATOR FOR SECTIONAL DOORS
Electromechanical ZEN 100E gearmotor 24 V ideal for sectional and overhead doors, up to 12 sqm.
Complete with encoder and in-built control it is available with belt or chain transmission.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
LED courtesy light.
Practical thanks to the control unit with plug-in receiver and self-learning function
and the dedicated connection to resistive edges 8.2kΩ (EN12978)
Versatile available with guide in one single piece or in sections.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€168,00 + TAXGLZEN100E
€168,00 + TAX