• PRG304ETC

    PRG304ETC – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS

    PRG304ETC  – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
    WITH MAXIMUM POWER YIELD 650W.
    ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS
    Digital work time control. Command inputs: TA, TC and TB. Security inputs:
    photocells, safety edge (N.C. contact or 8.2 kΩ), digital safety edge.
    Output for a courtesy light 230Vac 300W and for a led warning light. The
    appliance is supplied with a S449, 433MHz, FM decoder.
    Suitable for the control of automatic rolling shutters.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

     

    PRG304ETC

    156,00 + TAX
  • PRG3830CE

    PRG383OCE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR

    PRG383OCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 230V 400V.
    INDUSTRIAL PROGRAMMER CONTROLLING ONE SINGLE PHASE / THREE PHASE MOTOR
    ELECTRONIC CONTROL UNIT, BASIC VERSION
    – 370W single phase power supply 230Vac,
    – 700W three phase power supply 400Vac.

    Automatic, semiautomatic, manual and remote control functions.
    Command inputs TA, TB, TC, TD, TAL.
    Incorporated door security switch.
    Optional external control buttons.
    Electric brake output.
    Interface for a standard slot-in radio receiver card.
    Supplied with 4 x Ø16mm cable glands.
    The control unit is supplied with 4 x Ø16mm cable glands.
    The PRG383OCE control unit is Suitable for the control of industrial gates and doors with one three phase motor.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • PRG383TCE

    PRG383TCE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR

    PRG383TCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 230V 400V.
    INDUSTRIAL PROGRAMMER CONTROLLING ONE SINGLE PHASE / THREE PHASE MOTOR
    ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS
    – 370W single phase power supply 230Vac,
    – 700W three phase power supply 400Vac.

    Automatic, semiautomatic, manual and remote control functions.
    Command inputs TA, TB, TC, TD, TAL.
    Incorporated door security switch.
    Optional external control buttons.
    Electric brake output.
    Interface for a standard slot-in radio receiver card.
    Supplied with 4 x Ø16mm cable glands.
    The control unit is supplied with 4 x Ø16mm cable glands.
    The PRG383TCE control unit is Suitable for the control of industrial gates and doors with one three phase motor.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • PRG3840CE

    PRG3840CE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR

    PRG3840CE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR 400V.
    – 2200W three phase power supply 400V.
    Automatic, semiautomatic, manual and remote control functions.
    Command inputs TA, TB, TC, TD, TAL.
    Incorporated door security switch.
    Optional external control buttons.
    Electric brake output.
    Interface for a standard slot-in radio receiver card.
    Supplied with 4 x Ø16mm cable glands.
    Suitable for the control of industrial gates and doors with one three
    phase motor.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    PRG3840CE

    276,00 + TAX
  • PRG384TCE

    PRG384TCE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR

    PRG384TCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 400V.
    ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS

    – 2200W three phase power supply 400V.
    Automatic, semiautomatic, manual and remote control functions.
    Command inputs TA, TB, TC, TD, TAL.
    Incorporated door security switch.
    Optional external control buttons.
    Electric brake output.
    Interface for a standard slot-in radio receiver card.
    The control unit is supplied with 4 x Ø16mm cable glands.
    The PRG384TCE control unit is Suitable for the control of industrial gates and doors with one three phase motor.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    PRG384TCE

    300,00 + TAX
  • PRG807001

    PRG807001 – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS

    PRG807001  – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
    WITH MAXIMUM POWER YIELD 450W.
    Digital work time control separately memorised for each gate leaf guided by a
    6-digit display. Possible operation without mechanical travel limits. Torque setting.
    Maximum power initial thrust control, torque limitation and deceleration
    management with deceleration zone control. The appliance is fitted with an
    interface for the insertion of a standard Cardin radio receiver card.
    Suitable for the control of automatic gates and doors with two 230V motors.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    PRG807001

    153,00 + TAX
  • PRG900

    PRG900 – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS

    PRG900 – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS
    Electronic PRG900 control unit programmer for the control of 24Vdc hinged gates with
    intelligent time control functions that allow you to control the position of
    the hinged and sliding gates, .

    The PRG900 control uniti fitted with a multi-decoding module S449
    – S486 – S504 – S508. Gate travel time programming is fully automatic
    and guided by a 6-digit display which allows you to visualise the number
    of manoeuvres carried out and to set several parameters such as the
    type of motor, the torque setting and the limited opening distance.

    Dip-switches allow you to set the system parameters including: the
    sequential button mode, automatic reclosing, warning lamp pre-flashing,
    intermittent warning lamp activation, indicator light and photoelectric cell
    function setting and electric lock enable.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    PRG900

    222,00 + TAX
  • PRG900CB

    PRG900CB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES

    PRG900CB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS + charger and NiMH batteries
    Electronic PRG900CB control unit programmer for the control of 24Vdc hinged gates with
    intelligent time control functions that allow you to control the position of
    the hinged and sliding gates, .

    The PRG900CB control uniti fitted with a multi-decoding module S449
    – S486 – S504 – S508. Gate travel time programming is fully automatic
    and guided by a 6-digit display which allows you to visualise the number
    of manoeuvres carried out and to set several parameters such as the
    type of motor, the torque setting and the limited opening distance.

    Dip-switches allow you to set the system parameters including: the
    sequential button mode, automatic reclosing, warning lamp pre-flashing,
    intermittent warning lamp activation, indicator light and photoelectric cell
    function setting and electric lock enable.

    PRG900CB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES

    PRG900CB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS + charger and NiMH batteries
    Electronic PRG900CB control unit programmer for the control of 24Vdc hinged gates with
    intelligent time control functions that allow you to control the position of
    the hinged and sliding gates, .

    The PRG900CB control uniti fitted with a multi-decoding module S449
    – S486 – S504 – S508. Gate travel time programming is fully automatic
    and guided by a 6-digit display which allows you to visualise the number
    of manoeuvres carried out and to set several parameters such as the
    type of motor, the torque setting and the limited opening distance.

    Dip-switches allow you to set the system parameters including: the
    sequential button mode, automatic reclosing, warning lamp pre-flashing,
    intermittent warning lamp activation, indicator light and photoelectric cell
    function setting and electric lock enable.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    PRG900CB

    283,00 + TAX
  • RAP4E

    RAP4E – ELECTROMECHANICAL BARRIERS UP TO 4 M

    RAP4E – ELECTROMECHANICAL BARRIER UP TO 4 M
    Electromechanical RAP 4E barrier 24 V, with cataphoretic treatment and painting.
    With cataphoresis treatment and painting.
    Complete with control unit and encoder.
    Max boom length 4,25 m. Net span 4 m.

    RAP 4E
    This barrier has a perfect movement and can operate also in absence of power supply.
    This feature thanks to the possibility of inserting 2 back up batteries.<<
    Which could be placed in the dedicated housing.
    A 24Vdc motor coupled with an encoder ensures perfect controlled boom movement.
    The low voltage motor (24 Vdc) allows intensive use in all conditions.
    Thanks to the built-in encoder, it provides a high degree of protection against crushing.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    RAP4E

    911,00 + TAX
  • RCQ433-3G

    RCQ433-3G – 433MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G FUNCTIONS IN BOX (12 / 24Vac-dc).

    RCQ868-3G – 433MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G FUNCTIONS (12/24Vac-dc)
    The RCQ433-3G receiver  can be fitted with up to four programmable relay
    modules MCCMORPHM1 (impulsive, ON-OFF or timer controlled).
    1 relay inserted.
    Possibility of memorising up to 3000 codes.
    USB connection and 2G-3G-WiFi module for remote user and
    activation of the output relays.
    The RCQ433/868-3G10 receivers include a 10 year subscription
    with our partner Vodafone.

    All weather box in ABS – IP55.
    Overall dimensions 135 x 175 x 85.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    RCQ433-3G

    245,00 + TAX
  • RCQ433-3G10

    RCQ433-3G10 – 433MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G + SIM VODAFONE FOR 10 YEARS

    RCQ433-3G10 – 433MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G FUNCTIONS (12/24Vac-dc) + SIM VODAFONE FOR 10 YEARS
    The RCQ433-3G10 receivers  can be fitted with up to four programmable relay
    modules MCCMORPHM1 (impulsive, ON-OFF or timer controlled).
    1 relay inserted.
    Possibility of memorising up to 3000 codes.
    USB connection and 2G-3G-WiFi module for remote user and
    activation of the output relays.
    The RCQ433/868-3G10 receivers include a 10 year subscription
    with our partner Vodafone.

    All weather box in ABS – IP55.
    Overall dimensions 135 x 175 x 85.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

     

    RCQ433-3G10

    378,00 + TAX
  • RCQ433-WF

    RCQ433-WF – 433MHz RECEIVER WITH LCD DISPLAY AND WIFI

    RCQ433-WF – 433MHz RECEIVER WITH LCD DISPLAY AND WIFI FUNCTIONS (12/24Vac-dc).
    The RCQ433-WF receiver  can be fitted with up to four programmable relay
    modules MCCMORPHM1 (impulsive, ON-OFF or timer controlled).
    1 relay inserted.
    Possibility of memorising up to 3000 codes.
    USB connection and 2G-3G-WiFi module for remote user and
    activation of the output relays.
    The RCQ433/868-3G10 receivers include a 10 year subscription
    with our partner Vodafone.

    All weather box in ABS – IP55.
    Overall dimensions 135 x 175 x 85.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    RCQ433-WF

    229,00 + TAX

Main Menu