-
ARM
ARM – ARTICULATED FOR SWING GATES
ARM MOTOR IS IN PHASE OUT –
REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TMARM – ARTICULATED ARM FOR SWING GATES
Electromechanical 230 V actuators for swing gates up to 3 meters.
Ideal for very wide columns and where the articulated arms delivers a smooth and fluid movement.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Reliable thanks to the sturdy mechanical parts and the powerful motor.230 V irreversible electromechanical gearmotor, with painted articulated arm.
For leafs up to 3 m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
SPW10
SPW 10 – SUPPLEMENTARY SOLAR PANEL KIT FOR SUN POWER
SPW10 –SUPPLEMENTARY SOLAR PANEL KIT FOR SUN POWER
SUPPLEMENTARY PHOTOVOLTAIC SOLAR PANEL KIT :
Two photovoltaic panels complete with adjustable brackets.
SPW10 Kit to increase the power capacity of SUNPOWER Power cupply systemIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€168,00 + TAXSPW10
€168,00 + TAX -
SUNPOWER
SUN POWER – KIT SOLAR PANEL POWER SUPPLY
SUNPOWER / SUN POWER POWER SUPPLY KIT
Solar panels for use with all 24Vdc automation marked with the
SUNPOWER symbol (with the exception of the PARKSUN series that has
built-in solar panels).
Two solar panels complete with adjustable brackets.
Watertight box with batteries, command electronics and charger.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€301,00 + TAXSUNPOWER
€301,00 + TAX -
T124 CONTROL UNIT
T124 – CONTROL UNIT MOTORS 24V
T124 / T 124 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T124 for 1 motor 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€152,00 + TAXT124 CONTROL UNIT
€152,00 + TAX -
T21B CONTROL UNIT
T21B – ELECTRONIC CONTROL UNIT
T21B / T 21B CONTROL UNIT – ELECTRONIC PROGRAMMER CONTROLLING ONE 230V MOTOR
T 21B for rolling grills or rolling shutters max. 1300W.
Supplied with a fitted RSQ504OC2 receiver card.
Protection grade IP55.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€70,00 + TAXT21B CONTROL UNIT
€70,00 + TAX -
T31 CONTROL UNIT
T 31 – ELECTRONIC CONTROL UNIT
T31 – ELECTRONIC CONTROL UNIT
Control unit for 1 roller shutter motor in 230 V.
Plug in receiver (optional).
T31 Control unit like T21, but with limit switch inputs,
motor force adjustment and courtesy light output.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
T1 CONTROL UNIT
T1 – ELECTRONIC CONTROL UNIT
T1 / T 1- ELECTRONIC CONTROL UNIT
Control unit for 1 roller shutter motor in 230 V.
Ideal for the manual control of one rolling grill or rolling shutter motor.
Protection grade IP55.
Plug in receiver (optional).
T 1 Control unit for motor in handead man function.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€40,00 + TAXT1 CONTROL UNIT
€40,00 + TAX -
T600 CONTROL UNIT
T600 ELECTRONIC CONTROL UNIT 230V
T600 / T 600 ELECTRONIC CONTROL UNIT FOR TWO 230V MOTORS
Control unit T600 for 1/2 motors 230 Vdc, with torque adjustment, slowing down and encoder.
Encoder controlled programmer with torque limitation, deceleration
and safety device exclusion via dip-switch:
– new external 32VA transformer;
– third programming button;
– flashing warning light output;
– second channel OC2 output (contact US1);
– terminal blocks for motor capacitor connection;
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€176,00 + TAXT600 CONTROL UNIT
€176,00 + TAX -
KIT STONE3
KIT STONE3 / KIT STONE 3 – ELECTROMECHANICAL PISTON 230V FOR SWING GATES
KIT STONE3 – IS IN PHASE OUT
REPLACED BY THE KIT MODEL : KT-BLADE3KIT STONE3 / KIT STONE 3 – ELECTROMECHANICAL PISTON 230V FOR SWING GATES
Electromechanical actuators or motor KIT STONE3 is ideal for swing gates up to 3 meters.
Equipped with encoder, release mechanism with coded key, and oscillating rear bracket.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Reliable with a sturdy aluminum body treated against oxidation and the oscillating rear
bracket that absorbs the possible sagging of the leafs.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
KIT STONE324
KIT STONE324 / KIT STONE 324 – ELECTROMECHANICAL PISTON 24V FOR SWING GATES
KIT STONE324 – IS IN PHASE OUT
REPLACED BY THE KIT MODEL : KT-BLADE324KIT STONE324 / KIT STONE 324 – ELECTROMECHANICAL PISTON 24V FOR SWING GATES
Electromechanical actuators or motor KIT STONE324 is ideal for swing gates up to 3 meters.
Equipped with encoder, release mechanism with coded key, and oscillating rear bracket.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Reliable with a sturdy aluminum body treated against oxidation and the oscillating rear
bracket that absorbs the possible sagging of the leafs.KIT STONE324 IT IS REPLACED BY KT-BLADE324
Actuators or motor 24 V irreversible electromechanical piston.
For leafs up to 3 m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
STONE524
STONE524 STONE 524 – ELECTROMECHANICAL PISTON 24V FOR SWING GATES
STONE524 – IS IN PHASE OUT
REPLACED BY THE MODEL : BLADE524STONE524 / STONE 524 – ELECTROMECHANICAL PISTON 24V FOR SWING GATES 5M
Electromechanical actuators or motor STONE524 is ideal for swing gates up to 5 meters.
Equipped with encoder, release mechanism with coded key, and oscillating rear bracket.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Reliable with a sturdy aluminum body treated against oxidation and the oscillating rear
bracket that absorbs the possible sagging of the leafs.STONE524 IT IS REPLACED BY BLADE524
ActuatorS or motor 230 V irreversible electromechanical piston.
For leafs up to 5 m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
STONE324
STONE324 STONE 324 – ELECTROMECHANICAL PISTON 24V FOR SWING GATES
STONE324 – IS IN PHASE OUT
REPLACED BY THE MODEL : BLADE324STONE324 / STONE 324 – ELECTROMECHANICAL PISTON 24V FOR SWING GATES
Electromechanical actuators or motor STONE324 is ideal for swing gates up to 3 meters.
Equipped with encoder, release mechanism with coded key, and oscillating rear bracket.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Reliable with a sturdy aluminum body treated against oxidation and the oscillating rear
bracket that absorbs the possible sagging of the leafs.STONE324 IT IS REPLACED BY BLADE324
ActuatorS or motor 230 V irreversible electromechanical piston.
For leafs up to 5 m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount