-
RSQ508C2
RSQ508C2 – 868MHz 2-CHANNEL SLOT-IN RECEIVER CARD (12 / 24Vac-dc).
RSQ508C2 – 868MHz 2-CHANNEL SLOT-IN RECEIVER CARD (12 / 24Vac-dc).
The unit RSQ508C2 Receiver card for direct insertion into a host appliance designed to
receive it. Fitted with 2 relay channels which can be set to ON/OFF or
impulsive.
Possibility of memorising up to 1000 codes.Overall dimensions(mm) 95 x 75 x 25.
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€57,00 + TAXRSQ508C2
€57,00 + TAX -
DKSTPT – TRANSPONDER
DKSTPT – TRANSPONDER READER
DKSTPT – TRANSPONDER READER IS IN PHASE OUT
REPLACED WITH : DKSTPMT -TRASPONDER READER IN ZAMAK CASEDKSTPT – TRANSPONDER READER
The DKSTPT transponder reader is Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).€57,00 + TAXDKSTPT – TRANSPONDER
€57,00 + TAX -
BBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
BBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
BBASL07N – 0.7 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL10N – 1.0 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL12N – 1.2 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL18N – 1.8 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
MECHANICAL AUXILIARY DEVICES FOR SWING / SLIDING GATES
High profile 61mm – contact output N.C. – colour black.
Safety edge for garage doors N.C. contact
This mechanical device is an extremely versatile safety edge in aluminium that can be fitted to
overhead garage doors, rolling shutters and other industrial closing devices. The edges are fitted with
sealed micro-switches and have a series of accessories permitting a variety of combinations and uses.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€57,00 – €93,00 + TAXBBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
€57,00 – €93,00 + TAX -
DKSTPMT – TRANSPONDER IN ZAMAK CASE
DKSTPMT – TRANSPONDER READER IN ZAMAK CASE
DKSTPMT – TRANSPONDER READER IN ZAMAK CASE
TRANSPONDER READER Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
system.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€57,00 + TAXDKSTPMT – TRANSPONDER IN ZAMAK CASE
€57,00 + TAX -
NOIRERB2
NOIRERB2 / NOIRE RB2 RECEIVER 433,92 MHz
NOIRE RB2 / NOIRERB2 -REMOTE CONTROL RECEIVER / TRASMITTER
NOIRE remote control are flexible; they can work at with fix code 433.92 MHz or with Rolling Code,
to grant maximum safety.
All NOIRE transmitters can be personalized though a family code, by using programming unit PRG NOIRE.
The refined design, sober and essential, assures the maximum ergonomic comfort.
The remote control range is completed by code selflearning receivers and programmable outputs.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€60,00 + TAXNOIRERB2
€60,00 + TAX -
RQM508C2
RQM508C2 – 868MHz STANDARD MIN 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
RQM508C2 – 868MHz STANDARD INDOOR MINI 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
The unit RQM508C2 is an electronic circuit with a 10-way terminal block; Fitted with 2 relay
channels which can be set to ON/OFF or impulsive.
Possibility of memorising up to 1000 codes.ABS indoor enclosure – IP20.
Overall dimensions(mm) 95 x 75 x 25.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€60,00 + TAXRQM508C2
€60,00 + TAX -
FM400RB2
FM400RB2 – REMOTE CONTROL RECEIVER
FM400RB2 / FM400 RB2 – REMOTE CONTROL RECEIVER WITH FREQUENCY MODULATION
The refined design, sober and essential assures the maximum ergonomic comfort.
FM range combines the security of the rolling code to an excellent immunity to radio interferences.
Special functions: self learning and the possibility to add codes remotely.FM400 RB2 / FM400RB2 RECEIVER
Receiver with 230 V power supply and four outputs with power contact (max 5 A 230 V) in switching and voltage free.
Code self-learning, programmable outputs with 3 different modes and watertight box (IP56).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€60,00 + TAXFM400RB2
€60,00 + TAX -
EDGERB2
EDGERB2 / EDGE RB2 RECEIVER 433,92 MHz
EDGERB2 / EDGE RB2 RECEIVER
The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
The refined design, sober and essential assures the maximum ergonomic comfort.
Edge range combines the simplicity of the fixed code to an excellent transmission range.
Special functions: self learning codes and possibility to copy codes
directly between transmitters.EDGE RB2 / EDGERB2 RECEIVER
EDGE RB2 compact size universal receiver 12/24 V ac/dc power supply. 2 channels.
Compatible with TANGO SLIM series remote control transmitters (Old series in face out)If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€60,00 + TAXEDGERB2
€60,00 + TAX -
T10 CONTROL UNIT
T 10 – ELECTRONIC CONTROL UNIT
T10 – ELECTRONIC CONTROL UNIT
Control unit for roller shutters, with built in receiver.
Ideal for tubular or shutter motors.
It can also control lighting systems with 2 lamps at 230V.
Inputs for via wire controls.
Built-in receiver compatible with EDGE, NOIRE and FM400 series.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount
€60,00 + TAXT10 CONTROL UNIT
€60,00 + TAX -
INTBTC4 – BLUETOOTH INTERFACE
INTBTC4 – BLUETOOTH INTERFACE IN BOX (12 / 24Vac-dc).
INTBTC4 – BLUETOOTH INTERFACE WITH FOUR RELAYS
The interface with a Bluetooth module allows the control of four relays
with NO or NC contacts. The selection dip-switches (one block per
relay) allow you to select the relay’s activation method: impulsive, ON/
OFF, timer controlled or remotely controlled relay activation using the
programming calender in the Cardin multiprotocol interface Cardin
RCQ504/508W00. The programming buttons (one per relay) allow
you to set the activation times for the relays (from 1 s to 5 min) for
the timer controlled mode.
The Bluetooth module MODBT is to be ordered separately.
Power supply 12/24Vac-dc.
Electrical input 50mA.
Overall dimensions 95 x 75 x 25.
Indoor box IP20If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€60,00 + TAXINTBTC4 – BLUETOOTH INTERFACE
€60,00 + TAX -
TXQPRO508-4
TXQPRO508-4 INDUSTRIAL ROLLING CODE TRANSMITTER / REMOTE CONTROL
TXQPRO508-4 INDUSTRIAL TRANSMITTER S508, FM DIGITAL REMOTE CONTROL WITH ROLLING CODES – INTERNAL ANTENNA
4-function pre-coded remote control transmitter (868MHz)
Container in shockproof, water-proof material IP65.
Power supply 6V with lithium batteries 2 x CR123A.
Overall dimensions 50 x 145 x 26.€61,00 + TAXTXQPRO508-4
€61,00 + TAX -
TXQPRO504-4
TXQPRO504-4 INDUSTRIAL ROLLING CODE TRANSMITTER / REMOTE CONTROL
TXQPRO504-4 INDUSTRIAL TRANSMITTER S504, FM DIGITAL REMOTE CONTROL WITH ROLLING CODES – EXTERNAL ANTENNA
4-function pre-coded remote control transmitter (433MHz)
Container in shockproof, water-proof material IP65.
Power supply 6V with lithium batteries 2 x CR123A.
Overall dimensions 50 x 145 x 26.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€61,00 + TAXTXQPRO504-4
€61,00 + TAX