-
KIT ASY324
KIT ASY324 – KIT COMPLETE ELECTROMECHANICAL PISTON 24V SWING GATES
KIT ASY324 – IS IN PHASE OUT
REPLACED BY THE MODEL : KT-BLADE324KIT ASY324 / KIT ASY 324 – ELECTROMECHANICAL PISTON 24V FOR SWING GATES
Electromechanical operator KIT ASY 324 , ideal for swing gates up to 3 metres.
Equipped with encoder, release with encoded key and rear swing support.
Safe thanks to the precision and sensitivity of the encoder.
Practical electrical connections and manual release.
Versatile in all models and accessories.
Reliable with sturdy structure in corrosion treated aluminium.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
STAR2AE
STAR 2AE / STAR2AE – SLAVE SELF-LOCKING SWINGING GARAGE DOOR MOTOR 230V
STAR 2AE / STAR2AE – EELECTROMECHANICAL MOTOR FOR OVERHEAD DOORS
Electromechanical gearmotor 230 V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.STAR2AE
230 V irreversible electromechanical gearmotor.
Complete with electric limit switches, encoder and control unit.
With autotransformer and torque adjustment.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€409,00 + TAXSTAR2AE
€409,00 + TAX -
SNAP6
SNAP6 – ELECTROMECHANICAL BARRIER UP TO 6M
SNAP6 / SNAP 6 – ELECTROMECHANICAL BARRIER FOR ACCESS CONTROL UP TO 6M
Barrier SNAP 6 with enhanced electromechanical gearmotor powered at 24 Vdc.
Designed to control accesses up to 6 m with fluid and fast movements.
Snap, in addition to the new mechanical project, stands out for its advanced electronic control
unit and a complete series of accessories.Safe thanks to the precision and sensitivity of the encoder and to the acceleration and deceleration ramps.
Practice with the control unit positioned at the top, the built-in signaling LEDs
the various predispositions including the one for the two buffer batteries.
Electromechanical barrier 24 V, in sturdy steel structure.
C/w control unit and encoder.
Max boom length 6,25 m. Net span 6 m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€1.360,00 + TAXSNAP6
€1.360,00 + TAX -
SNAP4
SNAP4 – ELECTROMECHANICAL BARRIER UP TO 4M
SNAP4 / SNAP 4 – ELECTROMECHANICAL BARRIER FOR ACCESS CONTROL UP TO 4M
Barrier SNAP 4 with enhanced electromechanical gearmotor powered at 24 Vdc.
Designed to control accesses up to 4 m with fluid and fast movements.
Snap, in addition to the new mechanical project, stands out for its advanced electronic control
unit and a complete series of accessories.Safe thanks to the precision and sensitivity of the encoder and to the acceleration and deceleration ramps.
Practice with the control unit positioned at the top, the built-in signaling LEDs
the various predispositions including the one for the two buffer batteries.
Electromechanical barrier 24 V, in sturdy steel structure.
C/w control unit and encoder.
Max boom length 4,25 m. Net span 4 m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€1.225,00 + TAXSNAP4
€1.225,00 + TAX -
SNAP3
SNAP3 – ELECTROMECHANICAL BARRIER UP TO 3M
SNAP3 / SNAP 3 – ELECTROMECHANICAL BARRIER FOR ACCESS CONTROL UP TO 3M
Barrier SNAP 3 with enhanced electromechanical gearmotor powered at 24 Vdc.
Designed to control accesses up to 3 m with fluid and fast movements.
Snap, in addition to the new mechanical project, stands out for its advanced electronic control
unit and a complete series of accessories.Safe thanks to the precision and sensitivity of the encoder and to the acceleration and deceleration ramps.
Practice with the control unit positioned at the top, the built-in signaling LEDs
the various predispositions including the one for the two buffer batteries.
Electromechanical barrier 24 V, in sturdy steel structure.
C/w control unit and encoder.
Max boom length 3,25 m. Net span 3 m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€1.345,00 + TAXSNAP3
€1.345,00 + TAX -
RAP4E
RAP4E – ELECTROMECHANICAL BARRIERS UP TO 4 M
RAP4E – ELECTROMECHANICAL BARRIER UP TO 4 M
Electromechanical RAP 4E barrier 24 V, with cataphoretic treatment and painting.
With cataphoresis treatment and painting.
Complete with control unit and encoder.
Max boom length 4,25 m. Net span 4 m.
RAP 4E
This barrier has a perfect movement and can operate also in absence of power supply.
This feature thanks to the possibility of inserting 2 back up batteries.<<
Which could be placed in the dedicated housing.
A 24Vdc motor coupled with an encoder ensures perfect controlled boom movement.
The low voltage motor (24 Vdc) allows intensive use in all conditions.
Thanks to the built-in encoder, it provides a high degree of protection against crushing.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€911,00 + TAXRAP4E
€911,00 + TAX -
DOMOPARKE
DOMOPARKE – ELECTROMECHANICAL PARKING SAVER
DOMOPARKE / DOMOPARK E – ELECTROMECHANICAL PARKING SAFE
Automatic DOMOPARKE parking saver with inbuilt solar panel.
It is completely independent from the mains power supply.
Works up to 4 months in total absence of light.
– electronic programmer;
– solar panel;
– built-in NOIRE EDGE FM400 receiver “433MHz” ROLLING CODE;
– one NOIRE pre-coded two-channel transmitter;
– buffer batteries;If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€956,00 + TAXDOMOPARKE
€956,00 + TAX -
EDGE230R4
EDGE230R4 / EDGE 230R4 RECEIVER 433,92 MHz
EDGE230R4 / EDGE 230R4 RECEIVER
The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
The refined design, sober and essential assures the maximum ergonomic comfort.
Edge range combines the simplicity of the fixed code to an excellent transmission range.
Special functions: self learning codes and possibility to copy codes
directly between transmitters.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€89,00 + TAXEDGE230R4
€89,00 + TAX -
EDGER4P
EDGER4P RECEIVER 433,92 MHz
EDGER4P / EDGE R4P RECEIVER
The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
The refined design, sober and essential assures the maximum ergonomic comfort.
Edge range combines the simplicity of the fixed code to an excellent transmission range.
Special functions: self learning codes and possibility to copy codes directly between transmitters.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€88,00 + TAXEDGER4P
€88,00 + TAX -
EDGERB2
EDGERB2 / EDGE RB2 RECEIVER 433,92 MHz
EDGERB2 / EDGE RB2 RECEIVER
The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
The refined design, sober and essential assures the maximum ergonomic comfort.
Edge range combines the simplicity of the fixed code to an excellent transmission range.
Special functions: self learning codes and possibility to copy codes
directly between transmitters.EDGE RB2 / EDGERB2 RECEIVER
EDGE RB2 compact size universal receiver 12/24 V ac/dc power supply. 2 channels.
Compatible with TANGO SLIM series remote control transmitters (Old series in face out)If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€60,00 + TAXEDGERB2
€60,00 + TAX -
EDGEOC2
EDGEOC2 / EDGE OC2 RECEIVER 433,92 MHz
EDGEOC2 / EDGE OC2 RECEIVER
The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
The refined design, sober and essential assures the maximum ergonomic comfort.
Edge range combines the simplicity of the fixed code to an excellent transmission range.
Special functions: self learning codes and possibility to copy codes
directly between transmitters.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€33,00€37,00+ TAXEDGEOC2
€33,00€37,00+ TAX -
EDGE2
EDGE2 / EDGE 2 – REMOTE CONTROLS TRASMITTER 433,92 MHz
EDGE2 / EDGE 2 – REMOTE RADIO CONTROL TRASMITTER 433,92 MHz
EDGE 2E Portable transmitters 2 channels.
2-channel portable versions with code transfer function between two remote controls.
Black casing, bi-injection molded, with rubber top.
To have the maximum sensitivity and make the radio control indestructible.
Soft key ring supplied.
Compatible with TANGO SLIM series receivers (Old series in face out)
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€24,00 + TAXEDGE2
€24,00 + TAX
