-
ICON – WARNING FLASHING LIGHT
ICON – 24-230V LED FLASHING LIGHT WITH ANTENNA
ICON – LED FLASHING LIGHT 24V – 230V WARNING LIGHT WITH ANTENNA
Multi-led warning flashing light with 433MHz antenna integrated in the circuit.
The light system is placed inside a shockproof container made of opalescent polycarbonate
that accentuates the realization of the luminous effect.
Selectable power supply on terminal board: 24Vac-dc – 230Vac.
Duty cycle 70%.
Steady light/flashing light selection jumper.
IP54 degree of protection.
Comes with relative column/wall support.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€35,00 + TAXICON – WARNING FLASHING LIGHT
€35,00 + TAX -
ICONX WARNING FLASHING LIGHT
ICONX – 24-230V LED FLASHING LIGHT WITH ANTENNA
ICONX – LED FLASHING LIGHT 24V – 230V WARNING LIGHT WITH ANTENNA
Special version with acoustic signal of the moving leaf e transparent cap
that allows the luminous visualization of the LEDs
RGB (orange, red, green, purple, white) with Cardin Pro control units.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€54,00 + TAXICONX WARNING FLASHING LIGHT
€54,00 + TAX -
ILBINO SINCRO
ILBINO SINCRO
ILBINO SINCRO photocell
Programmable infrared photocell.
ILBINO SINCRO PHOTOCELL is ideal for complex systems with up to 8 pairs of photocells thanks to the new synchronism system.
The power supply can be 24V alternating or direct, without polarity references.
ILBINO SINCRO
Pair of synchronized mini photocells.
Range 25 m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€36,00 + TAXILBINO SINCRO
€36,00 + TAX -
ILBSINCRO
ILBSINCRO PHOTOCELL
ILBSINCRO PHOTOCELL
Programmable infrared photocell.
ILB SINCRO photocell is Ideal for complex systems with up to 8 pairs of photocells thanks to the new synchronism system.
The power supply can be 24V alternating or direct, without polarity references.PHOTOCELL ILB SINCRO
Pair of synchronized flush mounted photocells with adjustable optics.
Range 50 m.€42,00 + TAXILBSINCRO
€42,00 + TAX -
INTBTC4 – BLUETOOTH INTERFACE
INTBTC4 – BLUETOOTH INTERFACE IN BOX (12 / 24Vac-dc).
INTBTC4 – BLUETOOTH INTERFACE WITH FOUR RELAYS
The interface with a Bluetooth module allows the control of four relays
with NO or NC contacts. The selection dip-switches (one block per
relay) allow you to select the relay’s activation method: impulsive, ON/
OFF, timer controlled or remotely controlled relay activation using the
programming calender in the Cardin multiprotocol interface Cardin
RCQ504/508W00. The programming buttons (one per relay) allow
you to set the activation times for the relays (from 1 s to 5 min) for
the timer controlled mode.
The Bluetooth module MODBT is to be ordered separately.
Power supply 12/24Vac-dc.
Electrical input 50mA.
Overall dimensions 95 x 75 x 25.
Indoor box IP20If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€60,00 + TAXINTBTC4 – BLUETOOTH INTERFACE
€60,00 + TAX -
KIT ACE 601
KIT ACE 601 / KIT ACE601 : GEARMOTORS FOR SLIDING GATES 24V
KIT ACE 601 / KIT ACE601 : GEARMOTORS FOR SLIDING GATES 24V 600Kg
Electromechanical gearmotor in grease lubrication.
Ideal for industrial sliding gates up to 600 Kg.
Complete with encoder, magnetic limits and built built-in control unit.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Versatile fixing plate with adjustable height and depth.
Reliable with a sturdy aluminum base treated against oxidation and all moving parts in oilbath.
Constant performance over time and in any condition thanks to reduced wear&tear
and the possibility to maintain the oil at the ideal temperature using HOT (optional).
Manual release with coded lock.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€534,00 + TAXKIT ACE 601
€534,00 + TAX -
KIT ACE FAST
KIT ACE FAST / KIT ACEFAST : GEARMOTORS FOR SLIDING GATES 24V
KIT ACE FAST / KIT ACEFAST : GEARMOTORS FOR SLIDING GATES 24V 300Kg
Electromechanical gearmotor in grease lubrication.
Ideal for industrial sliding gates up to 300 Kg.
Complete with encoder, magnetic limits and built built-in control unit.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Versatile fixing plate with adjustable height and depth.
Reliable with a sturdy aluminum base treated against oxidation and all moving parts in oilbath.
Constant performance over time and in any condition thanks to reduced wear&tear
and the possibility to maintain the oil at the ideal temperature using HOT (optional).
Manual release with coded lock.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€396,00 + TAXKIT ACE FAST
€396,00 + TAX -
KIT ARM
KIT ARM – ARTICULATED FOR SWING GATES
KIT ARM IS IN PHASE OUT –
REPLACED WITH KIT : KT-BLGRIFFE24 or KT-BLGRIFFE24TKIT ARM – ARTICULATED ARM FOR SWING GATES
Electromechanical 230 V actuators for swing gates up to 3 meters.
Ideal for very wide columns and where the articulated arms delivers a smooth and fluid movement.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Reliable thanks to the sturdy mechanical parts and the powerful motor.230 V irreversible electromechanical gearmotor, with painted articulated arm.
For leafs up to 3 m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
KIT ARM 24
KIT ARM24 – ARTICULATED FOR SWING GATES
KIT ARM 24 – MOTOR IN PHASE OUT
REPLACED BY KIT : KT-BLGRIFFE24 ou KT-BLGRIFFE24TKIT ARM24 – ARTICULATED ARM FOR SWING GATES
Electromechanical 24 V actuators for swing gates up to 3 meters.
Ideal for very wide columns and where the articulated arms delivers a smooth and fluid movement.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Reliable thanks to the sturdy mechanical parts and the powerful motor.230 V irreversible electromechanical gearmotor, with painted articulated arm.
For leafs up to 3 m.
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
KIT ASY3
KIT ASY3 – ELECTROMECHANICAL PISTON 24V FOR SWING GATES
KIT ASY3 – IS IN PHASE OUT
REPLACED BY THE MODEL : KT-BLADE3KIT ASY3 / KIT ASY 3 – ELECTROMECHANICAL PISTON 24V FOR SWING GATES
Electromechanical operator KIT ASY324 , ideal for swing gates up to 3 metres.
Equipped with encoder, release with encoded key and rear swing support.
Safe thanks to the precision and sensitivity of the encoder.
Practical electrical connections and manual release.
Versatile in all models and accessories.
Reliable with sturdy structure in corrosion treated aluminium.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
KIT ASY324
KIT ASY324 – KIT COMPLETE ELECTROMECHANICAL PISTON 24V SWING GATES
KIT ASY324 – IS IN PHASE OUT
REPLACED BY THE MODEL : KT-BLADE324KIT ASY324 / KIT ASY 324 – ELECTROMECHANICAL PISTON 24V FOR SWING GATES
Electromechanical operator KIT ASY 324 , ideal for swing gates up to 3 metres.
Equipped with encoder, release with encoded key and rear swing support.
Safe thanks to the precision and sensitivity of the encoder.
Practical electrical connections and manual release.
Versatile in all models and accessories.
Reliable with sturdy structure in corrosion treated aluminium.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
KIT EVO 600
KIT EVO 600 / KIT EVO600 : GEARMOTORS FOR SLIDING GATES
KIT EVO 600 / KIT EVO600 : GEARMOTORS FOR SLIDING GATES 600Kg
Electromechanical gearmotor in grease lubrication.
Ideal for industrial sliding gates up to 600 Kg.
Complete with encoder, magnetic limits and built built-in control unit.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Versatile fixing plate with adjustable height and depth.
Reliable with a sturdy aluminum base treated against oxidation and all moving parts in oilbath.
Constant performance over time and in any condition thanks to reduced wear&tear
and the possibility to maintain the oil at the ideal temperature using HOT (optional).
Manual release with coded lock.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€486,00 + TAXKIT EVO 600
€486,00 + TAX