-
CP30BL – PASSIVE IMPACT EDGE
CP30BL – PASSIVE IMPACT EDGE
BP20BL – 2-METER PASSIVE IMPACT EDGE (PROFILE 70mm) – SAFETY DEVICES
CP30BL – 3-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
CP40BL – 4-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
CP50BL – 5-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
PASSIVE IMPACT EDGE – PASSIVE AUXILIARY DEVICES FOR SWING AND SLIDING GATES
High profile 70mm / low 30mm – colour black.
Low profile / high profile passive edge
Although it is not to be considered a safeties devices due to the absence of an electrical contact.
he passive edge has the same dimensions and mechanical protective characteristics as
the active safety edge and does supply valid absorption protection against impact. The
low profile edge, which works as simple impact protection, is suitable for closing
devices where passing room is limited.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€39,00 – €75,00 + TAXCP30BL – PASSIVE IMPACT EDGE
€39,00 – €75,00 + TAX -
RSQ508OC2
RSQ508OC2 – 868MHz 2-CHANNEL SLOT-IN RECEIVER OPEN COLLECTOR (12 / 24Vac-dc).
RSQ508OC2 – 868MHz 2-CHANNEL SLOT-IN RECEIVER OPEN COLLECTOR (12 / 24Vac-dc).
The unit RSQ508OC2 Receivers Open collector card for direct insertion into a host appliance
designed to receive it. Impulsive channels.
Possibility of memorising up to 1000 codes.Overall dimensions(mm) 95 x 75 x 25.
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€40,00 + TAXRSQ508OC2
€40,00 + TAX -
T1 CONTROL UNIT
T1 – ELECTRONIC CONTROL UNIT
T1 / T 1- ELECTRONIC CONTROL UNIT
Control unit for 1 roller shutter motor in 230 V.
Ideal for the manual control of one rolling grill or rolling shutter motor.
Protection grade IP55.
Plug in receiver (optional).
T 1 Control unit for motor in handead man function.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€40,00 + TAXT1 CONTROL UNIT
€40,00 + TAX -
POS50A
POS50A – COLUMN IN ANODIZED ALUMINUM
POS50A – Anodized aluminum column 55 cm high,
for one module of the APRO / VEDO and PASSO devices.
Pack of 2 pcs.CP POS Fixing kit for POS50A and POS100A, POS100AA columns.
POS50A It is replaced by the new CARDIN column: SEL50
€41,00 + TAXPOS50A
€41,00 + TAX -
ILBSINCRO
ILBSINCRO PHOTOCELL
ILBSINCRO PHOTOCELL
Programmable infrared photocell.
ILB SINCRO photocell is Ideal for complex systems with up to 8 pairs of photocells thanks to the new synchronism system.
The power supply can be 24V alternating or direct, without polarity references.PHOTOCELL ILB SINCRO
Pair of synchronized flush mounted photocells with adjustable optics.
Range 50 m.€42,00 + TAXILBSINCRO
€42,00 + TAX -
VEDO180PRO
VEDO180PRO PHOTOCELL
VEDO180PRO PHOTOCELL
Photocell VEDO180 PRO programmable infrared photocell. Ideal for complex installations, up to 8 couples of photocells thanks to
new synchronised system. Infrared beam could be regulated horizontally over 180°.
The particular selfcentering lent corrects mistakes also vertically. Supply can be at 24V alternating voltage
or continue, without polarity refer.
Range 25m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€43,00 + TAXVEDO180PRO
€43,00 + TAX -
CDR841E00 – PHOTOCELL
CDR841E00 – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 15MCDR841E00 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in a waterproof plastic case.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR851).CDR841E00 PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 15m
The kit contains a pair of surface-mount photoelectric cells, 2 lens
covers for surface-mount photocells and 2 fast-fitting wall bracketsIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€43,00 + TAXCDR841E00 – PHOTOCELL
€43,00 + TAX -
POS100A
POS100A – COLUMN IN ANODIZED ALUMINUM
POS100A – Anodized aluminum column 110 cm high,
for one module of the APRO / VEDO and PASSO devices.
Pack of 1 pcs.CP POS Fixing kit for POS100A and POS100A, POS100AA columns.
Conf. da 1 pcs.
POS100A It is replaced by the new CARDIN column: SEL120
€44,00 + TAXPOS100A
€44,00 + TAX -
POS100AA
POS100AA – COLUMN IN ANODIZED ALUMINUM
POS100AA – Anodized aluminum column 110 cm high,
for two module of the APRO / VEDO and PASSO devices.
Pack of 1 pcs.CP POS Fixing kit for POS100A and POS100A, POS100AA columns.
Conf. da 1 pcs.
POS100AA It is replaced by the new CARDIN column: SEL120D
€44,00 + TAXPOS100AA
€44,00 + TAX -
CDR841I00 – PHOTOCELLS
CDR841I00 – PHOTOCELL WITH SHOCKPROOF CASE
IP55 RANGE 15MCDR841I00 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS
IN A SHOCKPROOF CASE IP55 15M RANGE
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in a waterproof plastic case.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR851).CDR841I00 PHOTOCELL – FLUSH-FITTING PHOTOELECTRIC CELLS, RANGE 15m
The kit contains a pair of flush-fitting photoelectric cells and 2 lens
covers for flush-fitting photocells.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€46,00 + TAXCDR841I00 – PHOTOCELLS
€46,00 + TAX -
FTR893C3 – MINI PHOTOCELL
FTR893C3 / FTR 893C3 – MINI PHOTOCELL
WITH SURFACE MOUNT CASE IP55
FTR 893C3 / FTR893C3 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
FTR893C3 / FTR 893C3 DOUBLE-RELAY PHOTOELECTRIC PHOTOCELLS
Power supply 12/24Vac-dc.
Range: 2,5m indoors.
Transmitter cable 4 metres – Receiver cable 4 metres.SINGLE-BEAM INFRARED BARRIER PHOTOELECTRIC PHOTOCELLS
Overall dimensions 90 x 50 x 20.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€46,00 + TAXFTR893C3 – MINI PHOTOCELL
€46,00 + TAX
