-
SAFEKITCDR8 – KIT STATIONARY UNIT + PAIR PHOTOCELLS
SAFEKITCDR8 – KIT STATIONARY UNIT + WIRELESS PHOTOCELLS RADIO 868MHz
SAFEKITCDR8 – KIT PAIR OF PHOTOCELLS WIRELESS RADIO + STATIONARY TRANSCEIVER UNIT INTERFACE 433MHz
SAFECDR8 – PAIR OF PHOTOCELLS RADIO ( WIRELESS PHOTOELECTRIC CELLS)
SAFEDECX8 – STATIONARY TRANSCEIVER UNIT
ROLLING CODE FM RADIO system. transmission frequency: 433MHz
SAFECDR8 – PAIR OF PHOTOCELLS RADIO ( WIRELESS PHOTOELECTRIC CELLS)
3V lithium battery power supply.
Maximum radio signal range 30m.
Maximum infrared range 10m.
Transmitter and receiver housed in shockproof and waterproof
cases IP65.SAFEDECX8 – STATIONARY TRANSCEIVER UNIT
Power supply 12/24Vac-dc.
Maximum radio signal range 30m.
8 safety devices.
3 safety outputs NC/8.2kΩ.
Shockproof case IP65.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€202,00 + TAXSAFEKITCDR8 – KIT STATIONARY UNIT + PAIR PHOTOCELLS
€202,00 + TAX -
SAFEKITCDR4 – KIT STATIONARY UNIT + PAIR PHOTOCELLS
SAFEKITCDR4 – KIT STATIONARY UNIT + WIRELESS PHOTOCELLS RADIO 433MHz
SAFEKITCDR4 – KIT PAIR OF PHOTOCELLS WIRELESS RADIO + STATIONARY TRANSCEIVER UNIT INTERFACE 433MHz
SAFECDR4 – PAIR OF PHOTOCELLS RADIO ( WIRELESS PHOTOELECTRIC CELLS)
SAFEDECX4 – STATIONARY TRANSCEIVER UNIT
ROLLING CODE FM RADIO system. transmission frequency: 433MHz
SAFECDR4 – PAIR OF PHOTOCELLS RADIO ( WIRELESS PHOTOELECTRIC CELLS)
3V lithium battery power supply.
Maximum radio signal range 30m.
Maximum infrared range 10m.
Transmitter and receiver housed in shockproof and waterproof
cases IP65.STATIONARY TRANSCEIVER UNIT
Power supply 12/24Vac-dc.
Maximum radio signal range 30m.
8 safety devices.
3 safety outputs NC/8.2kΩ.
Shockproof case IP65If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€202,00 + TAXSAFEKITCDR4 – KIT STATIONARY UNIT + PAIR PHOTOCELLS
€202,00 + TAX -
T224 CONTROL UNIT
T224 – CONTROL UNIT MOTORS 24V
T224 – CONTROL UNIT IN PHASE OUT
REPLACED BY THE : T624T224 / T 224 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T224 for 2 motors 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€199,00 + TAXT224 CONTROL UNIT
€199,00 + TAX -
BOXMOLE
BOXMOLE : EMBEDDING CASE – UNDERGROUND ACTUATOR FOR SWING GATES
BOX MOLE – EMBEDDING CASE IN PHASE OUT
REPLACED BY : HLBOX HLBOXCBOXMOLE / BOX MOLE : EMBEDDING CASE – UNDERGROUND ACTUATOR FOR SWING GATES
Underground gearmotor 24 V ideal for swing gates up to 3 meters.
Complete with encoder and easy release for manual operation it is safe, practical and reliable.
Safe and Precise thanks to the encoder and the slowing down in opening and closing
Practical thanks to the control unit with plug-in receiver and self-learning function.
Adjustable mechanical limits in the foundation box.
Reliable thanks to the sturdy mechanical parts and the powerful motor in perfectly water
resistant aluminum shells.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€189,00 + TAXBOXMOLE
€189,00 + TAX -
HLBOX
HLBOX : HOT-GALVANIZED FOUNDATION GEAR MOTOR IN CATAPHORESIS + SBLSHL RELEASE WITH LEVER
HLBOX Foundation box or HEMBEDDED CASE for underground electromechanical gearmotor 24 V 230 V ideal for swing gates up to 3 meters.
Equipped with encoder and easy release.
Safe thanks to the precision and sensitivity of the encoder and to the slowdowns in opening and closing.
Practical thanks to the control unit with quick connection and self-learning receiver.
Adjustable limit switches integrated in the case.
Reliable with perfect watertightness and solid and robust mechanics.HLBOX EMBEDDED CASE
Complete with connection lever and adjustable mechanical travel limits.
Foundation box in hot-dip galvanized cataphoresis complete with connection
levers and mechanical stops adjustable in opening and closing.+ SBLSHL Release with lever for HLBOX or HLBOXI foundation boxes
All versions are fitted with a stainless steel cover.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€189,00 + TAXHLBOX
€189,00 + TAX -
T624 CONTROL UNIT
T624 – CONTROL UNIT MOTORS 24V
T624 / T 624 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T624 for 2 motors 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.MAINS POWER SUPPLY 230Vac
MOTOR OUTPUT 24Vdc
PROTECTION GRADE IP55
FIREPROOFING GRADE V2
AUTOMATIC GATE/DOOR PROGRAMMING€199,00 + TAXT624 CONTROL UNIT
€199,00 + TAX -
T201 ELECTRONIC CONTROL UNIT
T201 – ELECTRONIC CONTROL UNIT
T201 – ELECTRONIC CONTROL UNIT IS PHASE OUT
IT IS REPLACED BY THE T600 – ELECTRONIC CONTROL UNITT201 – ELECTRONIC CONTROL UNIT
Control unit to controll 1/2 230V motors with torque regulation and slowing down.
It can operate with or without encoder.
Equipped with self-learning function.
Connector for radio receiver OC2 series.
Inputs for the stroke end.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€176,00 + TAXT201 ELECTRONIC CONTROL UNIT
€176,00 + TAX -
GLZEN100E
GLZEN100E – ELECTROMECHANICAL ACTUATOR SECTIONAL DOORS
GLZEN100E -ELECTROMECHANICAL ACTUATOR FOR SECTIONAL DOORS
Electromechanical ZEN 100E gearmotor 24 V ideal for sectional and overhead doors, up to 12 sqm.
Complete with encoder and in-built control it is available with belt or chain transmission.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
LED courtesy light.
Practical thanks to the control unit with plug-in receiver and self-learning function
and the dedicated connection to resistive edges 8.2kΩ (EN12978)
Versatile available with guide in one single piece or in sections.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€168,00 + TAXGLZEN100E
€168,00 + TAX -
SPW10
SPW 10 – SUPPLEMENTARY SOLAR PANEL KIT FOR SUN POWER
SPW10 –SUPPLEMENTARY SOLAR PANEL KIT FOR SUN POWER
SUPPLEMENTARY PHOTOVOLTAIC SOLAR PANEL KIT :
Two photovoltaic panels complete with adjustable brackets.
SPW10 Kit to increase the power capacity of SUNPOWER Power cupply systemIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€168,00 + TAXSPW10
€168,00 + TAX -
ZEN100E
ZEN100E – ZEN100E -ELECTROMECHANICAL ACTUATOR FOR SECTIONAL DOORS
ZEN100E -ELECTROMECHANICAL ACTUATOR FOR SECTIONAL DOORS
Electromechanical gearmotor 24 V ideal for sectional and overhead doors, up to 12 sqm.
Complete with encoder and in-built control it is available with belt or chain transmission.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
LED courtesy light.
Practical thanks to the control unit with plug-in receiver and self-learning function
and the dedicated connection to resistive edges 8.2kΩ (EN12978)
Versatile available with guide in one single piece or in sections.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€168,00 + TAXZEN100E
€168,00 + TAX -
PRG230M2
PRG230M2 – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG230M2 – ELECTRONIC PROGRAMMERS FOR THE CONTROL OF TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 470 + 470W
Digital work time control separately memorised for each gate leaf guided by a
6-digit display. Possible operation without mechanical travel limits. Torque setting.
Maximum power initial thrust control, torque limitation and deceleration
management with deceleration zone control. The appliance is fitted with an
interface for the insertion of a standard Cardin radio receiver card.
Suitable for the control of automatic gates and doors with two 230V motors.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€168,00 + TAXPRG230M2
€168,00 + TAX -
T600 CONTROL UNIT
T600 ELECTRONI CONTROL UNIT 230V
T 600 ELECTRONIC CONTROL UNIT FOR TWO 230V MOTORS
Control unit T600 for 1/2 motors 230 Vdc, with torque adjustment, slowing down and encoder.
Encoder controlled programmer with torque limitation, deceleration
and safety device exclusion via dip-switch:
– new external 32VA transformer;
– third programming button;
– flashing warning light output;
– second channel OC2 output (contact US1);
– terminal blocks for motor capacitor connection;
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.€176,00 + TAXT600 CONTROL UNIT
€176,00 + TAX
