-
KIT ACE 601
KIT ACE 601 / KIT ACE601 : GEARMOTORS FOR SLIDING GATES 24V
KIT ACE 601 / KIT ACE601 : GEARMOTORS FOR SLIDING GATES 24V 600Kg
Electromechanical gearmotor in grease lubrication.
Ideal for industrial sliding gates up to 600 Kg.
Complete with encoder, magnetic limits and built built-in control unit.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Versatile fixing plate with adjustable height and depth.
Reliable with a sturdy aluminum base treated against oxidation and all moving parts in oilbath.
Constant performance over time and in any condition thanks to reduced wear&tear
and the possibility to maintain the oil at the ideal temperature using HOT (optional).
Manual release with coded lock.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€534,00 + TAXKIT ACE 601
€534,00 + TAX -
T624 CONTROL UNIT
T624 – CONTROL UNIT MOTORS 24V
T624 / T 624 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T624 for 2 motors 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€199,00 + TAXT624 CONTROL UNIT
€199,00 + TAX -
DOMOPARK230E
DOMOPARK230E – ELECTROMECHANICAL PARKING SAVER
DOMOPARK230E / DOMOPARK230 E – ELECTROMECHANICAL PARKING SAVER
Automatic parking safe DOMOPARK230 or DOMOPARK 230E with battery and transformer
for 230 V mains power supply.
Works up to 4 months in total absence of power supply.
– electronic programmer;
– built-in NOIRE EDGE FM400 receiver “433MHz” ROLLING CODE;
– one S504 pre-coded two-channel transmitter;
– buffer batteries.€875,00 + TAXDOMOPARK230E
€875,00 + TAX -
EVO 2000T
EVO2000T / EVO 2000T : OILBATH GEAR MOTOR FOR SLIDING GATES
EVO 2000T /EVO2000T : OILBATH GEAR MOTOR FOR SLIDING GATES 2000Kg 230V 400V THREE-PHASE
Electromechanical gearmotor in oilbath ideal for industrial sliding gates up to 2000 Kg.
Complete with encoder, magnetic limits and built built-in control unit.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Versatile fixing plate with adjustable height and depth.
Reliable with a sturdy aluminum base treated against oxidation and all moving parts in oilbath.
Constant performance over time and in any condition thanks to reduced wear&tear
and the possibility to maintain the oil at the ideal temperature using HOT (optional).
Manual release with coded lock.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
PRG400TE UNIT
PRG384TCE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR
PRG384TCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 400V.
ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS
– 2200W three phase power supply 400V.
Automatic, semiautomatic, manual and remote control functions.
Command inputs TA, TB, TC, TD, TAL.
Incorporated door security switch.
Optional external control buttons.
Electric brake output.
Interface for a standard slot-in radio receiver card.
The control unit is supplied with 4 x Ø16mm cable glands.
The PRG384TCE control unit is Suitable for the control of industrial gates and doors with one three phase motor.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€360,00 + TAXPRG400TE UNIT
€360,00 + TAX -
GENERIC PRODUCT MANUAL SALE
ILB SINCRO FOTOCELLULE DA INCASSO
ILB SINCRO RECESSED PHOTOCELLS
PHOTOCELLULES À ENCASTRER ILB SINCRO
€467,26 + TAXGENERIC PRODUCT MANUAL SALE
€467,26 + TAX -
GLZEN100E
GLZEN100E – ELECTROMECHANICAL ACTUATOR SECTIONAL DOORS
GLZEN100E -ELECTROMECHANICAL ACTUATOR FOR SECTIONAL DOORS
Electromechanical ZEN 100E gearmotor 24 V ideal for sectional and overhead doors, up to 12 sqm.
Complete with encoder and in-built control it is available with belt or chain transmission.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
LED courtesy light.
Practical thanks to the control unit with plug-in receiver and self-learning function
and the dedicated connection to resistive edges 8.2kΩ (EN12978)
Versatile available with guide in one single piece or in sections.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€168,00 + TAXGLZEN100E
€168,00 + TAX -
GLZEN60E
GLZEN60E – GL ZEN60E -ELECTROMECHANICAL ACTUATOR SECTIONAL DOORS
GLZEN60E / GL ZEN60E -ELECTROMECHANICAL ACTUATOR FOR SECTIONAL DOORS
Electromechanical gearmotor 24 V ideal for sectional and overhead doors, up to 12 sqm. Complete with
encoder and in-built control it is available with belt or chain transmission.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
LED courtesy light.
Practical thanks to the control unit with plug-in receiver and self-learning function and the dedicated
connection to resistive edges 8.2kΩ (EN12978)
Versatile available with guide in one single piece or in sections.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€150,00 + TAXGLZEN60E
€150,00 + TAX -
DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE
DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE
DKSTPM – TRANSPONDER IN ZAMA + INTERFACE KIT consists of two products:
DKSTPMT – TRANSPONDER IN ZAMA READER
DKS1000R – 4CH INTERFACEDKSTPMT – TRANSPONDER IN ZAMA READER
Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
system .DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€89,00 + TAXDKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE
€89,00 + TAX -
DKSTPMT – TRANSPONDER IN ZAMAK CASE
DKSTPMT – TRANSPONDER READER IN ZAMAK CASE
DKSTPMT – TRANSPONDER READER IN ZAMAK CASE
TRANSPONDER READER Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
system.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€57,00 + TAXDKSTPMT – TRANSPONDER IN ZAMAK CASE
€57,00 + TAX -
GLMECHA24S MOTOR
GLMECHA24M / GLMECHA 24M – MASTER SELF-LOCKING SWINGING GARAGE DOOR MOTOR 24V
GLMECHA24M / GLMECHA 24M – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD GARAGE DOORS 24V
Electromechanical gearmotor 24V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.GLMECHA24M / GLMECHA 24M – SELF-LOCKING GARAGE DOOR MOTOR
SELF-PROGRAMMING ELECTROMECHANICAL UNIT WITH A 24V MOTOR (433MHz)
Self-locking encoder-controlled Master automation with an in-built
electronic programmer.
Operator arms are to be ordered separately.
Kit battery charger + batteries to be ordered separately.
with a 230V slave motor for garage doors 2,5 m and 8 m2 .If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€295,00 + TAXGLMECHA24S MOTOR
€295,00 + TAX
