• GENERIC PRODUCT MANUAL SALE

    ILB SINCRO FOTOCELLULE DA INCASSO

    ILB SINCRO RECESSED PHOTOCELLS

    PHOTOCELLULES À ENCASTRER ILB SINCRO

  • GLZEN100E

    GLZEN100E  – ELECTROMECHANICAL ACTUATOR SECTIONAL DOORS

    GLZEN100E -ELECTROMECHANICAL ACTUATOR FOR SECTIONAL DOORS
    Electromechanical ZEN 100E gearmotor 24 V ideal for sectional and overhead doors, up to 12 sqm.
    Complete with encoder and in-built control it is available with belt or chain transmission.
    Safe and Precise thanks to the encoder and the slowing down in opening and closing.
    LED courtesy light.
    Practical thanks to the control unit with plug-in receiver and self-learning function
    and the dedicated connection to resistive edges 8.2kΩ (EN12978)
    Versatile available with guide in one single piece or in sections.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    GLZEN100E

    168,00 + TAX
  • GLZEN60E

    GLZEN60E – GL ZEN60E -ELECTROMECHANICAL ACTUATOR SECTIONAL DOORS

    GLZEN60E / GL ZEN60E -ELECTROMECHANICAL ACTUATOR FOR SECTIONAL DOORS
    Electromechanical gearmotor 24 V ideal for sectional and overhead doors, up to 12 sqm. Complete with
    encoder and in-built control it is available with belt or chain transmission.
    Safe and Precise thanks to the encoder and the slowing down in opening and closing.
    LED courtesy light.
    Practical thanks to the control unit with plug-in receiver and self-learning function and the dedicated
    connection to resistive edges 8.2kΩ (EN12978)
    Versatile available with guide in one single piece or in sections.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    GLZEN60E

    150,00 + TAX
  • DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE

    DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE

    DKSTPM       – TRANSPONDER IN ZAMA + INTERFACE KIT consists of two products:
    DKSTPMT     – TRANSPONDER IN ZAMA READER
    DKS1000R     – 4CH INTERFACE

    DKSTPMT – TRANSPONDER IN ZAMA READER
    Surface-mounting IP57.
    Using dip-switch settings it is possible to program the backlighting and other
    operational parameters. It is suitable for connection with the DKS security system
    via a shielded unipolar wire carrying both the power supply and the data line. Allows
    the interface to be activated by proximity reading an S500 transmitter, a TAG or a
    CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
    system .

    DKS1000R – 4 CHANNEL INTERFACE
    The interface box is easy to install and has the following features:
    – power supply 12 or 24Vac-dc;
    – 4 normally open relays (one for each channel);
    – management of up to 3 peripheral devices (keypads and/or transponder readers;
    – 1 multifunction key for the following functions: storing a code, cancelling a code,
    cancelling the entire memory content, inserting an activation code for the “remote
    memorisation” function. It is possible to store 1000 codes in memory with
    a maximum of 6 digits for each code. Each code can activate up to 4 channels
    (different functions).

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • DKSTPMT – TRANSPONDER IN ZAMAK CASE

    DKSTPMT – TRANSPONDER READER IN ZAMAK CASE

    DKSTPMT – TRANSPONDER READER  IN ZAMAK CASE
    TRANSPONDER READER Surface-mounting IP57.
    Using dip-switch settings it is possible to program the backlighting and other
    operational parameters. It is suitable for connection with the DKS security system
    via a shielded unipolar wire carrying both the power supply and the data line. Allows
    the interface to be activated by proximity reading an S500 transmitter, a TAG or a
    CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
    system.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • GLMECHA24S MOTOR

    GLMECHA24M / GLMECHA 24M – MASTER SELF-LOCKING SWINGING GARAGE DOOR MOTOR 24V

    GLMECHA24M / GLMECHA 24M – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD GARAGE DOORS 24V
    Electromechanical gearmotor 24V ideal for overhead doors up to 8 m2.
    Safe and Precise thanks to the encoder and the slowing down in opening and closing.
    Practical thanks to the control unit with plug-in receiver and self-learning function.
    LED courtesy light.
    Versatile, with a wide choice of accessories for any installation need.

    GLMECHA24M / GLMECHA 24M –  SELF-LOCKING GARAGE DOOR MOTOR
    SELF-PROGRAMMING ELECTROMECHANICAL UNIT WITH A 24V MOTOR (433MHz)
    Self-locking encoder-controlled Master automation with an in-built
    electronic programmer.
    Operator arms are to be ordered separately.
    Kit battery charger + batteries to be ordered separately.
    with a 230V slave motor for garage doors 2,5 m and 8 m2 .

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    GLMECHA24S MOTOR

    295,00 + TAX
  • GLMECHA230S MOTOR

    GLMECHA230S / GLMECHA 230S – SLAVE SELF-LOCKING SWINGING GARAGE DOOR MOTOR 230V

    GLMECHA230S / GLMECHA 230S – EELECTROMECHANICAL ACTUATOR MOTOR FOR OVERHEAD GARAGE DOORS 230V
    Electromechanical gearmotor 230V ideal for overhead doors up to 8 m2.
    Safe and Precise thanks to the encoder and the slowing down in opening and closing.
    Practical thanks to the control unit with plug-in receiver and self-learning function.
    LED courtesy light.
    Versatile, with a wide choice of accessories for any installation need.

    GLMECHA230S / GLMECHA 230S –  SLAVE SELF-LOCKING GARAGE DOOR MOTOR
    ELECTROMECHANICAL UNIT WITH A 230V MOTOR

    Self-locking slave automation.
    Use to supplement the GLMECHA230M units for particular
    installations that require two motors.
    Operator arm to be ordered separately.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    GLMECHA230S MOTOR

    295,00 + TAX
  • GLMECHA24M MOTOR

    GLMECHA24M / GLMECHA 24M – MASTER SELF-LOCKING SWINGING GARAGE DOOR MOTOR 24V

    GLMECHA24M / GLMECHA 24M – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD GARAGE DOORS 24V
    Electromechanical gearmotor 24V ideal for overhead doors up to 8 m2.
    Safe and Precise thanks to the encoder and the slowing down in opening and closing.
    Practical thanks to the control unit with plug-in receiver and self-learning function.
    LED courtesy light.
    Versatile, with a wide choice of accessories for any installation need.

    GLMECHA24M / GLMECHA 24M –  SELF-LOCKING GARAGE DOOR MOTOR
    SELF-PROGRAMMING ELECTROMECHANICAL UNIT WITH A 24V MOTOR (433MHz)
    Self-locking encoder-controlled Master automation with an in-built
    electronic programmer.
    Operator arms are to be ordered separately.
    Kit battery charger + batteries to be ordered separately.
    with a 230V slave motor for garage doors 2,5 m and 8 m2 .

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    GLMECHA24M MOTOR

    459,00 + TAX
  • GLMECHA230M MOTOR

    GLMECHA230M / GLMECHA 230M – MASTER SELF-LOCKING SWINGING GARAGE DOOR MOTOR 230V

    GLMECHA230M / GLMECHA 230M – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD GARAGE DOORS 230V
    Electromechanical gearmotor 230 V ideal for overhead doors up to 8 m2.
    Safe and Precise thanks to the encoder and the slowing down in opening and closing.
    Practical thanks to the control unit with plug-in receiver and self-learning function.
    LED courtesy light.
    Versatile, with a wide choice of accessories for any installation need.

    GLMECHA230M / GLMECHA 230M –  SELF-LOCKING GARAGE DOOR MOTOR
    SELF-PROGRAMMING ELECTROMECHANICAL UNIT WITH A 230V MOTOR (433MHz)
    Self-locking encoder-controlled Master automation with an in-built
    electronic programmer.
    Operator arms are to be ordered separately.
    Kit battery charger + batteries to be ordered separately.
    with a 230V slave motor for garage doors 2,5 m and 8 m2 .

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    GLMECHA230M MOTOR

    449,00 + TAX
  • SLX24DRACO2 MOTOR

    SLX24DRACO2 – ELECTROMECHANICAL UNIT WITH A 24V MOTOR

    SLX24DRACO2  MOTOR – FAST SELF-LOCKING UNIT ENCODER 24V FOR SLIDING GATES MAX. 2000KG + NIMH BATTERIES

    The SLX24DRACO2 motor for sliding gate automation is made up of a self-locking gear motor controlled
    by magnetic encoder with an in-built:
    – electronic programmer;
    – 433MHz FM receiver;
    The innovative SLX24DRACO2 system permits the gate’s movement to
    be accompanied with total security and features a “variable speed
    function” which can be adjusted according to the different installation
    requirements up to a maximum speed of 30m per minute.

     

    The electronic programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to rapidly set the system parameters including:
    the sequential button mode, automatic reclosing, warning lamp
    pre-flashing, intermittent warning lamp activation, indicator light and
    photoelectric cell function setting etc.
    The electronics card, thanks to the presence of the real-time clock,
    allows you to set 10 events (shown on the display) and these events
    permit you to regulate the opening and closing of the motor at
    different times during the day. The appliance is fitted with a safe and
    secure lever operated manual release system protected by a robust
    access door with a personalised key.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    SLX24DRACO2 MOTOR

    895,00 + TAX
  • KT-BLGRIFFE24T MOTOR KIT

    KT-BLGRIFFE24T – KIT BLGRIFFE24TMELECTROMECHANICAL GROUP WITH 24V MOTOR

    BLGRIFFE24TM MASTER SELF-LOCKING GROUP MOTOR WITH MECHANICAL LIMIT SWITCH 24V MAX. 200KG + NIMH BATTERIES(optional)
    BLGRIFFE24TM MASTER Encoder-controlled self-locking Master unit for swing gate with hinged arms including:
    – electronic programmer;
    – 433MHz FM receiver;
    – Operator hinged arm included.
    Kit battery charger + batteries to be ordered separately.

    KIT CONTENTS :  KT-BLGRIFFE24T

    BLGRIFFE24M – MASTER SELF-LOCKING GROUP
    with 24V motor controlled by encoder, programmer electronic,
    433MHz FM receiver, battery charger and NiMH batteries.

    BLGRIFFE24S – SLAVE SELF-LOCKING GROUP
    to automate the second door.

    ICON – LED FLASHING LIGHT 24V – 230V
    with built-in antenna.

    RSQ504OC2 – 2 CHANNEL RECEIVER OPEN COLLECTOR
    DUAL-CHANNEL CARD RECEIVER plug-in open collector 433MHz.
    Versions for the S508 – S486 – S449 and EDGE series are available on request.

    TXQ504C4 – 2 4-FUNCTION TRANSMITTERS
    433MHz FM ROLLING CODE.

    CDR999 – PAIR OF SURFACE PHOTOCELLS
    in class 3 with adjustable optics, 10m range.

    CABPC10 – 10m CONNECTION CABLE
    with pre-insulated end tubes.

    PLATE-INT  – INTERNATIONAL WARNING PLATE
    in multilingual PP.

    KT-BLGRIFFE24T MOTOR KIT

    685,00 + TAX
  • KT-BLGRIFFE24 MOTOR KIT

    KT-BLGRIFFE24 – KIT BLGRIFFE24MELECTROMECHANICAL GROUP WITH 24V MOTOR

    BLGRIFFE24M MASTER SELF-LOCKING GROUP MOTOR WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES(optional)
    BLGRIFFE24M MASTER Encoder-controlled self-locking Master unit for swing gate with hinged arms including:
    – electronic programmer;
    – 433MHz FM receiver;
    – Operator hinged arm included.
    Kit battery charger + batteries to be ordered separately.

    KIT CONTENTS :  KT-BLGRIFFE24

    BLGRIFFE24M – MASTER SELF-LOCKING GROUP
    with 24V motor controlled by encoder, programmer electronic,
    433MHz FM receiver, battery charger and NiMH batteries.

    BLGRIFFE24S – SLAVE SELF-LOCKING GROUP
    to automate the second door.

    ICON – LED FLASHING LIGHT 24V – 230V
    with built-in antenna.

    TXQ504C4 – 2 4-FUNCTION TRANSMITTERS
    433MHz FM ROLLING CODE.

    CDR999 – PAIR OF SURFACE PHOTOCELLS
    in class 3 with adjustable optics, 10m range.

    CABPC10 – 10m CONNECTION CABLE
    with pre-insulated end tubes.

    PLATE-INT  – INTERNATIONAL WARNING PLATE
    in multilingual PP.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    KT-BLGRIFFE24 MOTOR KIT

    745,00 + TAX

Main Menu